DREO PolyFan 311 Pedestal Air Circulator Fan User Guide

June 1, 2024
DREO

DREO logo Pedestal Air Circulator Fan
Poly Fan 311

DREO PolyFan 311 Pedestal Air Circulator Fan Quick Start Guide

Poly Fan 311 Pedestal Air Circulator Fan

When using the appliance for the first time. remove the wraps and attach the parts by following the steps below.

  1. Tum the column upside down. Push the column into the base by aligning the cutout on the bottom of column with the jutting point in the middies of the base.
  2. Thread the screw through the flat washer, insert into the base, and use the included screwdriver to drive the screw into the bottom of the column.
  3. After successfully installing the pedestal onto the column, turn them right side up. Then rotate the fan body onto the column until tightened.DREO PolyFan 311 Pedestal Air Circulator Fan - fan3
  4. Hold the main body while rotating the Adjustment Collar counterclockwise to raise or lower the pedestal air circulator fan to the desired height.DREO PolyFan 311 Pedestal Air Circulator Fan - fan4
  5. Tighten the adjustment collar by rotating clockwise. Plug the power adapter into the power (located at the back of the pedestal air circulator fan), and into the power outlet.

CAUTION

  1. Do not operate tne air circulator if the base has not been installed.
  2. Please exercise caution and handle the base with care during installation,

Scan the QR code to watch the installation

https://www.dreo.com/videos/hpf001s-greyDREO logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals