DREO DR-HTF007S Smart Tower Fan User Manual

DREO DR-HTF007S Smart Tower Fan

Specifications

• Model: DR-HTF007S
• Power: 35W
• Input: AC 220-240V 50Hz
• Battery Type: CR2025 3V

Product Usage Instructions

Mounting Your Tower Fan

1. Place the base on the bottom of the fan aligning the arrows at the bottom.
2. Lock the base by turning it counterclockwise.
3. Caution: Do not operate the tower fan without installing the base. Ensure the cable passes through all cable holders.

Connecting to Your Tower Fan

1. Start the Dreo app and log in or create an account following the app instructions.
2. Press and hold the oscillation button to start the pairing (the Wi-Fi symbol will continue to blink during pairing).
3. Follow the app instructions to establish the Wi-Fi connection.

Using Your Tower Fan

General Operation

1. Operational Modes:
   • Sleep Mode (Automatic Silent Activation): Fan speed decreases every 30 minutes. Speed ​​decreases by a maximum of two levels and remains constant at level 1: At level 4: 4 3 2, At level 3: 3 2 1,At level 2: 2 1, At level 1: 1
   • Auto Mode: Fan speed adjusts to the ambient temperature.
2. Silent Mode: Memory Function: When the fan is turned off and connected to power, it resumes with previous settings (except for the timer setting).

Frequently Asked Questions (FAQ)

Q: Can I use the tower fan without mounting the base?
A: No, it is essential to mount the base before operating the tower fan for safety reasons.

Q: How do I clean and maintain the tower fan?
A: Refer to the cleaning and maintenance instructions provided in the user manual for proper care of your tower fan.

Q: What should I do if I encounter issues with my tower fan?
A: For any product issues, contact Dreo customer support at eu- support@dreo.com or visit www.dreo.com for expert assistance.

IMPORTANT SAFETY INSTRUCTIONS

General Safety

1. The appliance can be used by children aged from 8 years and above and persons with reduced physical,sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a sale way and understand the hazards involved Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
2. Use the appliance as described in the user manual only. Any other use not recommended in the user manual may cause fire, electrical shock, or personal injury. Ensure that the fan is switched off from the supply mains before removing the guard.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Operation Safety

1. Place the appliance on a flat, dry surface before use.
2. Do not immerse in water and any other liquids.
3. Do not use the appliance until the base is installed.
4. Do not insert your fingers, pencil and any other objects into the grilles while in operation.
5. Do not dismantle, repair, or modify. All servicing should be performed by qualified personnel.

Electricity Safety

1. Make sure that the voltage of your electricity supply is the same as that indicated on the appliance.
2. Always unplug before cleaning or leaving the appliance unused for a long period of time. Keep your hands dry when plugging/unplugging.
3. Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
4. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
5. WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
6. WARNING – If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

FOR HOUSEHOLD USE ONLY
READ AND SAVE THESE INSTRUCTIONS

Gentle Reminder:

Check the appliance regularly and refer to TROUBLESHOOT-ING or contact our customer support if it shows any of the following signs:

• Power cord or plug is damaged.
• Loud noise, unusual smell or excessive heat.

Specifications

Battery Type

| ****

CR2025 3V

ASSEMBLING YOUR TOWER FAN

Assembly Instructions
When using the appliance for the first time, remove the wraps and attach the parts by following the steps below.

1. Keep two base halves in a crossed position, then insert pegs on one half onto the slots on the other half.
2. Press down on edges to click two base halves together.
3. Run the cord through the center hole.
4. Fit the base onto the bottom of the fan by aligning the arrows on the underside.
5. Rotate the base clockwise to lock in place.
6. Thread the cord through the cord keepers before putting the fan upright.

CAUTION

• Do not operate the tower fan if the base has not been installed.
• Make sure to thread the cord through all rear cord keepers.

Package Contents

CONNECTING TO YOUR TOWER FAN

Before connecting the appliance to your mobile device, please scan the QR code on the left or go to the app store and search “Dreo”, then select and download the app.

You can use the Dreo app to connect your smart tower fan to Amazon Alexa or Google Home. Please follow the in-app instructions to set up your voice assistant.

NOTE: You must create a Dreo account to access voice assistants.

1. Launch Dreo and sign in or create account by following in-app instructions.

2. Enable Bluetooth on your mobile device and plug in your tower fan.

3. Tap + Add Device and select the tower fan you want to link.

4. Hold the Oscillation button for 5 seconds to start WiFiconnection settings.
   (Tip: The WiFi icon will keep flashing when pairing.)

5. Follow in-app instructions to complete WiFi connection.

6. You’re now ready to control the appliance on your app.
   (Tip: To restart connection settings, hold the Oscillation button again for 5 seconds.)

KNOWING YOUR TOWER FAN

Control Panel

Mode Button
Switch between Normal/Natural/Sleep/Auto Mode

Fan Speed Button
Adjust airflow volume (1-4 levels)

Power Button
Turn power on/off

Timer Button
Select to set a timer (0-8h)

Oscillation Button
Adjust airflow direction

Note:
Long press and at the same time for 5s to reset to factory settings.

Note: When the fan is on standby, long press the Mode button and Fan Speed button 10s to turn off WiFi connection and enter Low Power Standby Mode.

LED Display

NOTE:

• Display will turn off after 1 minute (after 5 seconds in sleep mode).
• Wake up the display with any button.

Getting the Most out of Your Tower Fan

1. It’s not an air conditioner.
2. Remove any tall obstacles that might block
3. Combine with your AC unit to get cooler air throughout the room.
4. Position the tower fan closer to you to get
5. Place a bucket of ice in front of the fan for an extra cooling boost.

USING YOUR TOWER FAN

General Operations

Working Modes

Additional Features

Timer
When the fan is ON/OFF, touch the timer button repeatedly to set a timer from 1 to 8 hours. When the timer ends, the fan will stop/start running automatically. To cancel, set the time to 0 hour.
Note: When the auto off timer is enabled, display will return to fan speed after 3 seconds.

Mute

Method 1:
Short press the mute button on the remote control to turn on/off button sounds.

Method 2:
Long press the mode button on the control panel to turn on/off button sounds.

Memory
If the fan is turned OFF or disconnected from power,it will operate under the previous settings (except the timer setting) when it is turned ON again.

Firmware Update
Check the firmware version on the Dreo app and update reguarly for the fan to work more efficiently.
Display will show “UP” during the update process. Do not operate until the update is completed.

Remote Control

Battery Replacement

1. Press the locking button to pop out the battery holder.
2. Replace with the same battery type with the (+) side facing up.
3. Push in the holder until securely locked into place.

Note: If the indicator on the remote control doesn’t turn on any more, please consider replacing the battery.

WARNING
Chemical Burn Hazard. Keep batteries away from children.

This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the battery, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

The cells must be disposed of properly, including keeping them away from children. Even used cells may cause injury.

CLEANING AND MAINTENANCE

Outer Surface
Gently wipe off the dust with a soft, dry cloth.

Base

Press on the lock sign here and rotate counterclockwise to release the base from the fan, then press the tabs on the edges to detach the base halves from each other.

CAUTION

1. Always unplug the fan before any cleaning or maintenance
2. Do not immerse in water or get water inside the motor housing.
3. Do not use any chemical agents when cleaning the fan.
4. Store in a cool, dry place and cover it to protect from dust.

Rear Grille

WARNING
Turn off the appliance and unplug before any cleaning and maintenance.

1. Remove the screw on the top of the rear grille with a Philips screwdriver.
2. Lift up the grille and pull it out.
3. Clean the dust on blades using a vacuum cleaner or air duster. Rinse the rear grille under running water or with a clean, damp cloth.
4. Dry up, then install the grille and the screw back by following the reverse order of disassembly.

TROUBLESHOOTING

My fan won’t turn on!
Make sure that the cord is connected to a powered outlet and the mains voltage corresponds with the voltage indicated on the fan.

My fan is shaky and wobbling!

1. Place the fan on a flat, level surface.
2. Incorrect installation might also cause shakiness. Please refer to the assembly instructions in page 19-20 .Note that the power cord must be run through all rear keepers.

My fan is making vibration and noise!

1. Place the fan on a flat, level surface.
2. Be sure not to insert anything into the air inlet and outlet.

If your problem is not listed or still persists, please contact our Customer Support (see page 76)

Correct Disposal of this product

This marking indicates that this product should not be disposed of with other household waste throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources To return your used device, please use the return and collection system or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

DREO CUSTOMER CARE
Default 24-Month Warranty

This appliance is covered by Dreo warranty for 24 months from the date of its original purchase.

Extend Your Warranty
Extend your warranty by registering your new appliance on our website https://dreo.com/warranty

The warranty will not apply in cases of:

1. Accident, misuse, or repairs performed by unauthorized personnel.
2. Any unit that has been tampered with or used for commercial purposes.
3. Normal wear and tear of wearable parts.
4. Use of force, damage caused by external influences.
5. Damage caused by non-observance of the User Manual, e.g. connection to an unsuitable mains supply or noncompliance with the instructions.
6. Partially or completely dismantled appliances.
7. Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by DREO.

We can only provide after-sales service for products that are sold by DREO or DREO-authorized retailers and distributors. If you have purchased your unit from a different place, please contact your seller for return and warranty issues.

We’re Here to Help!

eu-support@dreo.com
www.dreo.com
Shenzhen Hesung Innovation
Technology Co., LTD
26F, Bldg A7, Creative City, Shenzhen, China

References

• Dreo Warranty Activation
• Dreo - Elevating Smart Living | Dreo Official Brand Website

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>