ZIOCOM BT5823 Music Receiver Transmitter User Manual

ZIOCOM BT5823 Music Receiver Transmitter

What’s in the Box

• Bluetooth Transmitter Receiver x 1
  

• 3.5mm audio cable x 1

• USB C charging cable x 1

• RCA audio cable x 1

• 3.5mm adapter x 1

Product name

1. Multifunction button
2. LED status
3. “+” previous song/ volume+
4. “-” next song/volume –
5. Pairing button
6. 3.5mm connection port
7. Mic port
8. RX/TX switch button
9. TypC charging port
   

specification

APTX-LL APTX-HD

Operating voltage| DC 3.0-4.2 V
Receiving mode operating current| < **22mA**
Emission mode operating current| <1 5mA
Receiving mode operating time| approximately 13H
Launch mode operating time| approx. 20H
Built -in lithium battery| 300mAH
Charging voltage| DC+SV
Charging time| approximately 2H

How It Works

Power on/ Power off

1. Long press the multi-function button ” ” 35, the device is turned on, (Blue light flashes RX receive mode, green light flashes TX transmit mode)
2. Press and hold the function button ” ” 35 device is turned off.
   

Reset:

If the connect ion fails to pair, you can reset the device as follows to clear all pairing records
Press and hold ” ” for 35, the blue/ green light flashes and clear all previous pairings.

How It Works

1. Connect playback device via 3.5mm audio cable
   

2. Turns on the transmitter and switches to RX
   
   RX-Receive Mode

3. Search for the Bluetooth device name “BT5823′, select and connect.
   

4. After the connection is successful, the blue light Always bright

connecting the phone B:
After the phone A is successfully connected, l Click Pairing button ” ” , The blue light flashes again. Turn on the Bluetooth of phone B, search for BT5823, and click connect.

Note: Up to 2 devices can be connected at the same time.

How It Works

1. connects to playback devices via 3.Smmm audio cable.
   

2. Turns on the transmitter and switches to TX
   
   

3. Turn on the Bluetooth headset / Bluetooth audio ,

4. Adjust the headset to pairing mode.

5. Headset and transmitter distance should not exceed 1 M, will automatically pair.

6. After the connection is successful, the Green light Always bright.

Connect two Bluetooth devices Need to know before connecting

When two headsets are connected at the same time, the device outputs SBC audio protocol if the headset has one headset without APTX function.

After the Headset A is successfully connected, l Click Pairing button ” ” , The green light flashes again.
Repeat 3-5 above to connect Headset B.

Button Function

| Function| Button| Operation

method

| Function Description
---|---|---|---|---
| Answer the call| | 1 Click|
Hang up the call| | 1Click|
Reject the call| | Press l Second|
Call back| | 2 Click| Call back the last outgoing call from the phone.
Call Switching| | Tress 1Second| During a call, this function is used to switch between the phone and the Bluetooth receiver for answering.
Call during call| | 1 Click| If another call comes in during the call, hangup the current call and answer the new call.
Call during call| | Tress 1 Second| If other calls come in during the call, answer the new call after the first call is placed on hold.
Calli ng Volume +| | Long press| Press and hold during the call
Calling Volume –| | Long press| Press and hold during the call
| Pause/play| | 1 Click|
Next song| | 1 Click|
Previous song| | 1 Click|
Volume +| | Lon g press|
Volume –| | Lon g pre ss|
VOICE ASSISTANT| TUR N ON / OFF VOICE ASSISTANT| | Tress 1second| This feature cannot be used during a call

Charging Tips

When the battery is low, the indicator light turns red and flashes quickly, and the device automatically shuts down when the battery runs out. Charging: red light is always on Charging completed: red light off Charging time: about 4 hours

Precautions

About automatic shutdown:

1. After power on if there is no any Bluetooth connection, it will automatically shut down after 10 minutes.
2. After the Bluetooth connection, the Bluetooth device is beyond the effective distance of 1 O meters from this product, it will automatically shut down after a period of time (20 minutes for receiving mode and 10 minutes for transmitting mode shutdown).

Precautions:

1. Please use the Type-C USB cable to connect the DC+SV adapter to power or charge the product to prevent the product from working abnormally;
2. Because the wireless signal of Bluetooth will be blocked and absorbed by surrounding abject, try to place it in an unobstructed position with the Bluetooth connected device during use, so that you can enjoy better quality music.

Support

Thank you for choosing us www.ziocomdirect.com
Email us,support@ziocomdirect.com

If you encounter any problems during the use of the product, please contact Ziocom after-sales support.
Contact Us: support@ziocomdirect.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>