ZIOCOM 28V Pin Bluetooth Adapter Receiver User Manual
- June 14, 2024
- ZIOCOM
Table of Contents
28V Pin Bluetooth Adapter Receiver
Specification
- Bluetooth Version : Bluetooth V5.0
- Bluetooth Protocol: SBC Fast stream
- Operation : CLASS2
- Frequency Range : 2.4GHz-2.480GHz
- Bluetooth Distance : 10m (up to 33 feet) Working
- Current: 38mA
- Battery: 170mAh
- External Supply Voltage : DC+5V – DC+16V
- Connector: 30pin dock, 3.5mm aux
- Device Name: Soul 3
Diagram
- ON/OFF Switch
- 3.5mm AUX Port
- 30 Pin Port
- OLED Screen
- Connected Device Status
- Play and Pause Status
- Volume Status
- Device Name
Power On
Turn and so “S the anew alight up Bluetooth icon at the left corner begin
to flash, it is the pairing mode.
- Pairing mode : Bluetooth icon flashes.
- Successfully connected : Bluetooth icon stops flashing. Power OFF Turn off SOUL 3, the screen goes off.
Power OFF
Turn off SOUL 3, the screen goes off.
The first way to connect – 30 Pin Connection
- Turn on SOUL 3,
- plug SOUL 3 into the dock, the speaker will turn to “iPod mode” automatically. ( If your speaker can not turn to “iPod” automatically, please change to the “iPod mode” manually).
- In the pairing mode, the first Bluetooth icon begin to flash; Turn on Bluetooth function of your cellphone and search ” SOUL 3″ , click to pair to it, if successfully connected, the first icon stops flashing. Enter code “0000” if needed.
- PLEASE NOTE : For some 30pin dock speakers, when SOUL 3 is successfully connected but no sound come out, you can try to connect SOUL 3 with speaker via 3.5mm audio cable. Please make sure your speaker is in AUX mode first.
The second way to connect – 3.5mm Aux Connection
SOUL 3 is a upgraded Bluetooth receiver, built-in battery, not only for 30pin
dock speakers, but also for no-Bluetooth speaker, headphone, headset. Turn
your no-Bluetooth speaker/ headphone into Bluetooth speaker/ headphone.
- Turn on SOUL 3.
- Turn on Bluetooth function of your cellphone and search “SOUL 3” , click to pair, if successfully connected, the first icon stops flashing. Enter code “0000” if needed.
- Connect your no-Bluetooth speaker or headset via 3.5mm connection. If successfully connected. You can enjoy music or audio wireless now.
Connect with Two Cellphones
- After the first device is successfully connected, turn on Bluetooth function of your second cellphone.
- Search the device name “SOUL 3” click to pair, if successfully connected, it will show up the second Bluetooth icon.
- PLEASE NOTE : If successfully connected, it will automatically connect to the last paired device when power on next time. Make sure you turn on Bluetooth function of your cellphone before SOUL 3 is powered on.
Automatically Power Off
SOUL 3 will automatically power off in below cases
- No device is connected in 5 minutes when power on.
- Successfully connected but out of working range, fail to connect in reconnecting state in 5 minutes.
- Battery voltage is below 2.8V.
- PLEASE NOTE: When SOUL 3 automatically power off, you should firstly toggle to “OFF” then toggle back to “ON” to power on.
Low Battery Alarm
When the battery voltage is below 3.1V, SOUL 3 will alarm with prompt sound;
And will automatically power off when voltage is below 2.8V.
- PLEASE NOTE: When plugged on the 30pin dock speaker, it will charge automatically and stop charging if get full power. It can only get charged by 30pin port.
- After-sale Service and Technical Support Email: Successfully connected but out of working range, fail to connect in reconnecting state in 5 minutes.
- support@ziocomdirect.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>