ZIOCOM 4812 8 Pin Bluetooth Adapter Receiver User Manual
- June 14, 2024
- ZIOCOM
Table of Contents
ZIOCOM 4812 8 Pin Bluetooth Adapter Receiver User Manual
Specifications:
Bluetooth Version: Bluetooth 5.1
Frequency Range: 2.4GHz-2.48GHz
Power Class: Class 2
Bluetooth Protocol: A2DP, AVRCP, HFP, HSP, PBAP, SPP, GATT
Bluetooth Range: up to 30 Feet(10m)
Product Diagram:
- Power On/Off, Play/Pause, Clear Paired list.
- Indicators
- Lightning Port
Compatible audio speaker models:
BOSE Sound Dock XT;
BOSE Sound Dock III;
JBL MS302GM;
PHILIPS DS1155B/93;
Philips AJ7260D/93;
RSR-DS406BT;
YAMAHA TSX-14;
I Home: IPL8BN;
Zeppelin Air C Bowers & Wil cons; And so on.
Power On
Insert BT4812 onto the Lighting Port of the Speaker, BT4812 will power on
automatically to start pairing mode, and red/blue indicator will flash
alternately. Power Off
When BT4812 is not connected or paired for 10 minutes, it will automatically
power off, and indicator will go off.
Paring
- Insert BT4812 onto the Lighting port of the speaker, BT4812 will start Pairing mode automatically.
- Search BT4812 via your mobile phone, and click to pair with it.
- The LED stays blue, that is, BT4812 successfully pairs with your mobile phone.
Play
After BT4812 is paired with your mobile phone, the indicator stays blue, then
you can play your favorite music and enjoy it.
Disconnecting
When BT4812 is paired with your mobile phone, long press the power button for
3 seconds to disconnect it with your mobile phone, and BT4812 will
automatically be on paring mode, and red/blue indicator will fast flash
alternately.
Automatically Pairing
- If the Bluetooth receiver paired with the mobile phone or other Bluetooth device, it will automatically pair with the paired Bluetooth device when it is powered on.
- When BT4812 is paired with your smart phone and on play status, if your mobile phone is beyond 10 meters distance from BT4812, BT4812 will disconnect automatically. If it is within, BT4812 will pair automatically. [Bluetooth Function is on]
- When the device is powered on, short press the power button to reboot to automatically pair with the last paired device.
Eliminating the paired list.
When BT4812 is on status, press the MF button for 5 seconds till the red and blue LED light flash for 1 second simultaneously, then BT4812 will eliminate all its paired records.