ZIOCOM BT4810 Wireless Receiver Transmitter User Manual
- June 14, 2024
- ZIOCOM
Table of Contents
ZIOCOM BT4810 Wireless Receiver Transmitter
Specification
- Bluetooth Version: Bluetooth vs.a
- Bluetooth Protocol: A2DP AVRCP
- Interface: Micro-USB, 3.5mm Aux
- Frequency Range: 2.4GHz-2.4B0GHz
- Working Range: about 10 meters/33 feet
- Power Supply: DC+SV
- Battery capacity: 250mAh
- Dimension: 52.5(L)34.5(W)8.7(H)mm
Diagram
- Multifunction button: Power ON /OFF; Pause/Play
- Indicator Light
- USB Charging Port
- 3.5mm Audio Input/Output Port
- Bluetooth Receiver/Transmitter Switch
Power
Power On
- Long press the button for 3 seconds to power on BT4810, the blue indicator will light for 1 s then enter pairing mode.
- In TX mode, the blue indicator light flashes quickly; In RX mode, the red and blue indicator lights flash alternately quickly.
Power Off
- Long press the button for 3 seconds until the red indicator light flashes once.
TX / RX Mode Switch
- Toggle the switch to TX or RX Mode:
- RX Mode: Bluetooth Receiver
- TX Mode: Bluetooth Transmitter
Clear Paired History
- In power-off state, long press the button for a seconds until the red and blue indicator simultaneously light for 1 s.
- After the pairing list is cleared, BT48TO will be on and enter pairing mode again.
TX Mode–Bluetooth Transmitter
How to Use
- For the firsttime to use, please pair BT4810 to a Bluetooth headphone or Bluetooth speaker after 3.5mm audio cable connected.
- Toggle the switch to “TX” position, then power on BT4810, and it will enter pairing mode automatically with the blue indicator flashing quickly. If there is no device to connect in 1 o minutes, it will power off automatically.
- Turn on your Bluetooth headphone or Bluetooth speaker etc. Ensure the distance is within 1 m, they will connect automatically.
- After the pairing is complete, the blue indicator light stays on. Now, you can enjoy music or audio from TV, PC etc. via a Bluetooth headphone or Bluetooth speaker.
Connect TWo Devices
- Connect BT481 Oto the first headphone and works normally.
- Double press the button to enter pairing mode with the blue indicator li9ht flashing quicl<ly. If there is no second device to connect in 1 O minutes, it will restore to the state of connecting one device, the blue indicator stays on.
- Turn on the second Bluetooth headphone or Bluetooth speaker etc. Ensure the distance is within 1 m, they will connect automatically.
- After the pairing is complete, the blue indicator light stays on, it successfully connects with two devices now.
Reconnection
- If the BT4810 has been paired to one device before, it will enter reconnection state when power on with the blue indicator light flashing quickly. It will enter pairing state if no device to reconnect in 1 Ss. It will power off if there is no device to connect in 1 O minutes.
- If the BT481 o has been paired to two devices before, after it reconnect to the first device, it will continue to reconnect to the second device, the blue indicator flashes quickly. The indicator stays on if successfully reconnect m 1 Ss, if it fails, it willrestore to the state of reconnecting with one device, the blue indicator keeps on.
Disconnect
- When the BT481 O has been paired with one or two receivers, long press the button for 2s, it will disconnect all connected device and enter pairing mode again, the blue indicator flash quickly.
Mute/Play
- Mute/Play: Short press the button
RX Mode–Bluetooth Receiver
How to Use
- For the first time to use, please pair BT481 Oto smartphones
- Toggle the switch to “RX” position, then power BT4810, and it will enter pairing mode automatically with the red and blue indicator
- flashing quickly. It will power off if no device to pair in 10 minutes.
- Turn on the Bluetooth function of your smartphone,\search the device name BT4810, and click to connect.
Connect Two Smartphones
- Connect BT481 o to the first smartphone and work normally.
- Double press the button, BT481 O will enter pairing mode again the red and blue indicator flash alternately. If there is no second smartphone to connect in 1 O minutes, it will restore to the state of connecting one device, the blue indicator flash in every 5s.
- Turn on Bluetooth function of your smartphone, search BT481 O and click to connect.
- The blue indicator flash in every 5s after successfully connected.
Reconnection
If the BT4810 has been paired to one smartphone before, it will enter reconnection state when power on with red and blue indicator light flashing alternately. It will enter pairing state if no device to reconnect in 15s. The blue indicator flash in every 5s when the reconnection is successful. It will power off if there is no device to connect in 10 minutes.
If the BT4810 has been paired to two smartphones before, after it reconnect to the first smartphone, it will continue to reconnect tothe second smartphone, the red and blue indicator flashes alternately. The blue indicator flashes in every 5s if successfully reconnect to thesecond smartphone in 15s, if it fails, it will restore to the state of reconnecting with one smartphone, the blue indicator flashes in every 5s.
Low Battery Prompt
- When voltage is lower than 3.4V, the red indicator will quickly flash 3 times in every 2 minutes.
- If the voltage is lower than 3.3V, it will power off automatically.
Notes
- The working voltage of the product is in the range of 3.0-4.2V.lf it is not used for a long time or for a long time, it should be charged in time to prevent the product from working abnormally or the battery is damaged.
- Because the wireless signal of Bluetooth will be blocked and absorbed by surrounding objects, it should be placed in the carrier-free position of the connected device with Bluetooth as much as possible,so that you can enjoy better music.
- Please keep the product away from water or other liquids to avoid damage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>