ZIOCOM LK02 Air Conduction Bluetooth Headphones User Manual
- June 14, 2024
- ZIOCOM
Table of Contents
ZIOCOM LK02 Air Conduction Bluetooth Headphones
Part description
Accessories
Specifications
Power on
Press and hold the button for , the Bluetooth device will automatically power
on, the blue light will flash intermittently; will be on for 1S, and then the
(if there is no pairing record, the red and blue lights will flash
alternately)
Power off
Long press the button for 3S, the bluetooth device will automatically shut
down after the red light is on for 2S ; Note: In the power-on state, the
headset will automatically shut down when charging the headset.
Headphone connection method (For the first use)
- The headset needs to be paired with the mobile phone.
- and me on tha or night wi resh red and the altimation button for 35)
- Search for the Bluetooth device name “LK02”, select and connect.
- After the connection is successful, the blue light indicates intermittently.
- Note : After the initial pairing is successful, the last device will be automatically paired when it is used for the second time.Enter “0000” password if necessary.
Change paired device
- Method 1. In the off state, press and hold the multi-function button for 6S to enter the pairing mode, and the red and blue flash alternately.
- Method 2. After disconnecting the current connection device, the headset automatically enters the pairing mode, you can connects other devices.
Reset
If the headset cannot be paired successfully, try the following operations.
- Press the ” ” key for about 6 seconds until the pink light is bright for 2 seconds, The headset has been restarted.
- After the equipment red and blue lights are flashing, choose the device you want to connect.
How to wear
As shown below, put the headset around your neck with the speakers rubbing
against your frontal bones rather than laid on your ears.
When the battery is low, the indicator light turns red. At this time, charge as shown in the figure below.
Precautions
- Please use the Type-C USB cable to connect the DC+5V adapter to power or charge the product to prevent the product from working abnormally;
- Because the wireless signal of Bluetooth will be blocked and absorbed by surrounding objects, try to place it in an unobstructed position with the Bluetooth connected device during use, so that you can enjoy better quality music.
support
If you have any trouble or problems, please contact us for more support!
- zd-cs-direct@outlook.com
- Mode: LK02 User Manual
- Contact Us : zd-cs-direct@outlook.com