ZIOCOM CSR8670 Bluetooth Headphones Set for TV Watching with Bluetooth Transmitter User Manual

ZIOCOM CSR8670 Bluetooth Headphones Set for TV Watching with Bluetooth

Transmitter

Specification

OutpJt p::111er

categay

| QA552| CLASS2
support Bluetooth protrxol| A2DP SBC FS

APTX APTX-ll

| HFPA2DP AVRCPHSP
°’3rgi  port| Type-C| Type-C
Wreless

transmis,,on ra e

| 30rre1Ers/

98feet

| l0meter
PcMerSUppty| DC+SV| DC+SV
Battery capacity|  | 3.7V/500mAh
Crargi Trne|  | 2.SHours
Talklinre/Mu c|  | 50~55Hours

Diagram

1. Power Button: Power On/Off; Play/Mute
2. Pairing Button
3. Vol-/Previous Track
4. Volt /Next Track
5. LED Indicator
6. TX Optical
7. TX 3.5mm AUX
8. USB+5V Power Supply Port

1. Volume Up/Next Track
2. Power Button: Power On/Off; Play/Mute
3. Volume Down/ Previous Track
4. LED Indicator
5. Charging Port
6. 3.5mm Audio Port
7. Microphone

How to use the kits

1. Use 3.5mm or optical audio cable to connect the BT5804G to your TV/Computer.
2. Short press the pairing button after powering on, it will enter the pairing state, the indicator “IX” begin to flash quickly.
3. Press and hold the ‘O’ Button of your Bluetooth Headphones for 4s until the indicator flashes blue and red alternately to enter the pairing mode.
4. The Bluetooth 1 stays on after successfully connecting, then you can enjoy music from the Bluetooth headphones. – BT5804G

Operation about the Bluetooth Transmitter

Power ON

1. Plug the power cable to BT5804G, it will power on automatically, the indicator will light up.
2. In the power-off state with the power cable plugged long press the power button for 2-3 seconds to power on BT5804G.

Power Off
Unplug the power cable or long-press the power button, it will power off automatically.

How to use the Bluetooth transmitter?

1. Unplug the power cable or long press the power button, it willpower off automatically.
2. Short press the pairing button after powering on, it will enter pairing state, the indicator “TX” begin to flash quickly.
3. Power on your Bluetooth receiver, make sure it is close to BT5804G within 1 meter.
4. 4. The Bluetooth 1 stays on after successfully connecting.

Pairing State

1. If it connects with one device, short press the pairing button, it will enter the pairing state, and the indicator “TX” flashes quickly.
2. If it connects with two devices, long press the pairing button for
3. it will disconnect the current connection and enter the pairing state.

Connect two Bluetooth Receiver

1. 1. After the first Bluetooth receiver is successfully connected, short press the pairing button, it will enter the pairing state, and the indicator” TX”‘ begins to flash quickly.
   2. Power on you second Bluetooth receiver, put it close to BT5804G within 1 meter, they will connect automatically.
   3. The Bluetooth 2 stays on after successfully connected; Thus the two Bluetooth receivers are successfully connected.

Lock Connection

1. When connected with one Bluetooth headphone, double pressing the pairing button can lock the connection, and the indicator will slowly flash 2 times after successfully locked.

Bluetooth Reconnection
Reconnect when Power On: It will enter a reconnection state after power on, the indicator “TX “flashes slowly. It will enter a pairing state after 3 minutes, and the indicator” TX “flashes quickly. Reconnect Out of Effective Range: It will disconnect when your device is out of the effective range and enter the reconnection state with the indicator “TX “flashing slowly.

Stand-by Mode
in TX Mode: When connected with one receiver, it will enter stand- state with indicator “TX” and “OPT” (or “AUX” \stavon if you turn off the Bluetooth receiver; In stand-by state, the BT5804G can be reconnected by Bluetooth receiver.

Operation of the Bluetooth Headphone

1. Power On/Off
   Power On: Press and hold the “O” button for 4s.
   Power Off: Press and hold the “O” button for 5s.
   Pairing: The indicator flashes blue and red alternately.

2. How to use the Bluetooth headphones?
   When the headset is powered off, press and hold the ‘O’ Button until the indicator flashes blue and red alternately to enter the pairing mode. Turn on the Bluetooth of the mobile phone and find”WH201A” to connect.

3. Clear Paired Device
   Long press the “O” button and the Volume button simultaneously until the red and blue lights flash 3 times at the same time.

Media Playback & Volume Functions

Call Functions

2sduring acai

Siri/GoogleVoice| Double-ctickthe “O” button

Charge the headphones

• In Charging: Red LED light stays on.
• Full Charge: Blue LED light stays on (charging for 2.5 hours).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>