TESLA Smart Sensor Water User Manual
- September 3, 2022
- Tesla
Table of Contents
TESLA Smart Sensor Water
Product Description
Network Setting
- Power on the product.
- Insert a thin blade or coin into the slot on the battery cover and rotate it counterclockwise to open the battery cover.
- Remove the battery insulation film to power on the product and close the battery cover.
- Press the reset button for 5S and release, the green LED will flash for the network setting.
Device pairing Hint:
Press the reset button for 5s-10s, and the green LED is on, once the green LED
turns off, release the reset button, and the green LED flashes, which means
ready for network setting. It keeps flashing for the 20s during the network
setting. If pressing for more than 10s, the network setting is canceled. The
green LED will be on for 5s to indicate the network setting succeeds. If
fails, the green led is off.
Installation Instructions
Place the product in the detection area.
Device pairing Hint:
Press the reset button for 5s-10s, until the green LED starts to flash. In the
Tesla Smart app, locate your Gateway, click on „ Add subdevice“ and follow the
instruction
Technical Parameters
| Wireless Technology | ZigBee |
|---|---|
| Working Voltage | DC 3 V (CR 2032 battery) |
| Transmission Frequency | 2.4 GHz |
| Working Temperature | 0°C to +55°C |
| Undervoltage Alarm | supported |
| Battery Lifespan | More than one year (20 times per day) |
| Water proof level | IP66 |
| Dimensions | 50 mm x 18 mm |
INFORMATION ABOUT DISPOSAL AND RECYCLING
This product is marked with the symbol for a separate collection. The product must be disposed of in accordance with the regulations for disposal of electrical and electronic equipment (Directive 2012/19/EU on waste electrical and electronic equipment). Disposal together with regular municipal waste is prohibited. Dispose of all electrical and electronic products in accordance with all local and European regulations at the designated collection points which hold the appropriate authorization and certification in line with the local and legislative regulations. Correct disposal and recycling help to minimize impacts on the environment and human health. Further information regarding disposal can be obtained from the vendor, authorized service center or local authorities.
EU DECLARATION OF CONFORMITY
Hereby, Witty, s.r.o declares that the radio equipment type TSL-SEN-WATER is
in compliance with EU directives. The full text of the EU declaration of
conformity is available at the following internet address:
teslasmart.com/declaration
- Connectivity: Wi-Fi 2,4 GHz IEEE 802.11b/g/n
- Frequency band: 2.412 – 2.472 MHz
- Max. radio-frequency power (EIRP): < 20 dBm
Manufacturer
Tesla Global Limited Gee Chang Industrial Building,121 Des Voeux Road Central
852 00 Hong Kong www.teslasmart.com