ADLER AD 1345 Electric Water Kettle User Manual
- June 4, 2024
- ADLER
Table of Contents
AD 1345 Electric Water Kettle
User Manual
AD 1345 Electric Water Kettle
SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ
CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different if the device is used for commercial
purposes.”
-
Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
-
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
-
The applicable voltage is 220-240V~ 50-60Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
-
Please be cautious when using around children. Do not let the children play with the product. Do not let children or people who do not know the device use it without supervision.
-
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision.
-
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
-
Never put the power cable, the plug, or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc. Never use the product in humid conditions.
-
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid
hazardous situations. -
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
-
Never put the product on or close to hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
-
Never use the product close to combustibles.
-
Do not let the cord hang over the edge of a counter or touch hot surfaces.
-
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, and unplug the power.
-
In order to provide additional protection, it is recommended to install a residue current device (RCD) in the power circuit, with a residual current rating of not more than 30 mA. Contact a professional electrician in this matter.
-
If the kettle is overfilled it may spurt boiling water.
-
WARNING: Do not open the lid if the water is boiling.
-
The kettle must only be used with the provided base.
-
CAUTION: Before lifting the kettle from the base make sure that the kettle is turned off.
-
This equipment is intended for domestic and similar use, such as staff kitchens in stores, offices, and other work environments, utility rooms, by customers in hotels, motels, and other residential environments of this type, in bedrooms and dining rooms.
-
Always use caution when boiling water in the kettle. Do not touch the housing of the kettle or lid. Do not open the lid during boiling in a kettle or immediately after boiling, because steam coming out of the lid can cause burns.
-
Move the kettle only by holding it by the handle.
-
Never fill kettle above MAX level and below MIN level. It may cause damage to the kettle.
-
Never switch on the kettle without water.
-
Never use the kettle without a filter or with an open cover (automatic shutdown will not work).
-
Descale your kettle regularly. Using a kettle with a heating element covered by a scale may cause damage.
-
Do not use aggressive detergents to wash the kettle housing – they can damage the kettle or remove the markings.
-
The device is not designed to work with external schedulers or separate remote control system.
-
Do not wash the base of the kettle directly in the water, just wipe with a dry cloth.
-
Children aged 3 to 8 years old can enable and disable the device only when it is in its normal position of use, they are supervised or instructed on the safe use and understand the resulting risks. Children aged 3 to 8 years old can not connect devices, operate, clean, or maintain them.
DEVICE DESCRIPTION ELECTRIC KETTLE AD1345
- Lid
- LED display
- Housing
- Handle
- Base
- Cover opening button
- Power button (On / Off)
- Temperature selection button
- Keep-warm function indicator
- Cooking indicator
- MIN / MAX water level indicator
- Touch panel
BEFORE FIRST USE
Fill the kettle three times with water to the maximum level, boil, and pour
out. To remove any factory odor.
Only touch the buttons on the touch panel (12) with your fingertips, touching
your fingernails may damage the touch panel!
BASIC OPERATION:
SINGLE WATER BOILING UP TO 100 °C
- Place the base (5) on a stable, flat, and heat-resistant surface.
- Fill the kettle with water so that the water level is between the maximum and minimum level on the water level indicator inside the kettle (11).
- Remember to close the kettle with the lid (1) after filling, otherwise, the kettle will not turn off automatically after boiling water.
- Insert the plug of the power cord into a 220-240V ~ 50-60Hz mains socket. Put the kettle on the base (5), you will hear the “di” sound, and the LED display (2) will show the current water temperature.
- Press the button (7), the cooking indicator (10) will light up, then the heater will start heating the water and the LED display (2) will start showing the current water temperature. The temperature of the water will increase until it boils, i.e. up to 100 ° C.
- After boiling the water, the kettle will automatically turn off, and you will hear a triple sound “di-di-di”.
- If you want to turn off the kettle before the boiling water is finished, lift it from the base (5) or press the button (7).
- The kettle can be switched on again approximately 2 minutes after the last use.
- When the appliance is not in use, the LED display (2) will stay on showing the current water temperature.
ADVANCED OPERATION:
BOILING WATER TO THE SELECTED TEMPERATURE 40 ℃ OR 55 ℃ / 80 ℃ / 90 ℃ WITH THE
TEMPERATURE KEEP-WARM FUNCTION
Put the kettle on the stand (5), and wait until you hear the “di” sound. Press
the temperature selection button (8), and the LED display (2) will show the
temperature of your choice (40 ℃ or 55 ℃ / 80 ℃ / 90 ℃) and blink four times
storing the selected temperature level, the temperature hold function
indicator (9) will light up. Then the LCD display (2) will show the current
water temperature inside the kettle.
The kettle will stop boiling water when it reaches the selected temperature
level of 40 ℃ or 55 ℃ / 80 ℃ / 90 ℃, you will hear a triple sound “di-di-di”.
After reaching the set temperature, the kettle will switch to the temperature
maintenance mode and will periodically heat the water when the water
temperature drops by 5 ℃ in relation to the selected temperature level.
If the water temperature in the kettle is higher than the desired temperature
(more than 5 ℃), the indicator of the keep-warm function (9) will flash until
the water cools down to the pre-set temperature of 40 ℃ or 55 ℃ 80 ℃ / 90 ℃),
being in the keep temperature mode all the time.
In order to interrupt the temperature maintenance function, remove the kettle
from its base (5) or press the button (7). The keep-warm function is
maintained for max.24 hours from the last cooking.
PROTECTION DEVICES
The device is equipped with an automatic fuse against overheating, the fuse
will trip when the kettle was used with insufficient water.
Always make sure that the volume of water in the appliance is above the
minimum level. If the fuse turns on, turn off the kettle by pressing the
button (7), then remove the plug from the power socket and allow the kettle to
cool for 5-10 minutes. Then fill the kettle with water and turn on the device
that will operate normally.
CLEANING AND MAINTENANCE
Limescale deposits inside the kettle should be removed regularly. This operation is not covered by the warranty service. Lack of regular descaling leads to damage to the kettle and loss of warranty. For descaling, use preparations specially designed for this purpose in accordance with the instructions for the descaling agent. After descaling, rinse the kettle thoroughly three times.
TECHNICAL DATA
Max capacity: 1.7L, min: 0.5L
Voltage: 220-240V ~ 50-60Hz.
Power: 1850-2200W
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags (PE) into the plastic container Worn device should be returned to the appropriate point storage because it is dangerous in the device ingredients may pose a threat to the environment. The electrical device should be handed over to limit its reuse and use. If in the device there are batteries you have to take them out and give them to the point stored separately.
AFTER-SALE SERVICE NOTICE
If you want to buy spare parts or make any complaints, please contact the
seller who issued the receipt directly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>