D-LINK DMS-108E 8 Port Multi Gigabit Desktop Switch Installation Guide

: June 14, 2024
: D-Link

Table of Contents

PRODUCT SETUP
PORT LED CONNECTION SPEED
TROUBLESHOOTING
Documents / Resources

8 PORT MULTI-GIGABIT
DESKTOP SWITCH
QUICK
INSTALLATION
GUIDE

PRODUCT SETUP

SWITCH SET-UP Step 1
Plug the power adapter into a free wall socket, then plug the other end of the power adapter cable into the power port of the switch.
The power LED will light up, confirming that the device is powered up successfully. Step 2
Use a LAN cable to connect your network device to one of the 8 ports on the switch. Step 3
Check the Link/Act lights(LEDs) on the switch to verify a proper connection.

PORT LED CONNECTION SPEED

Link/Act LED INDICATORS

Location	Color	Status	Description
LED Per 2.5G BASE-T Port (Port 1-8)	Blue	Solid	2.5G Connection
Blinking	Data transmission/Activity
Green	Solid	1000M Connection
Blinking	Data transmission/Activity
Amber	Solid	10/100M Connection
Blinking	Data transmission/Activity
Off	Light off	No link

TROUBLESHOOTING

SETUP AND CONFIGURATION PROBLEMS

WHAT TO DO IF THE POWER LED IS NOT LIT UP?
Check if the power adapter is properly connected to a wall socket and the back of the switch.
WHAT TO DO IF A CONNECTED DEVICE IS NOT DETECTED?
First check if the Port LED is flashing. If the Port LED is not illuminated, try connecting the device using a different LAN cable.

TECHNICAL SUPPORT

http://www.dlink.com/support

Appendix-Regulatory Statements
CE Mark Warning:
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
FCC statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

Innovation, Science and Economic Development Canada (ISED) Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Japan Voluntary Control Council for Interference Statement
This is a Class B product based on the standard of the VCCI Council. If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.
SAFETY INSTRUCTIONS
The following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage. Remember to consult the product user instructions for more details.

Static electricity can be harmful to electronic components. Discharge static electricity from your body (i.e. touching grounded bare metal) before touching the product.
Do not attempt to service the product and never disassemble the product. For some products with a user replaceable battery, please read and follow the instructions in the user manual.
Do not spill food or liquid on your product and never push any objects into the openings of your product.
Do not use this product near water, areas with high humidity, or condensation unless the product is specifically rated for outdoor application.
Keep the product away from radiators and other heat sources.
Always unplug the product from mains power before cleaning and use a dry lint free cloth only.

DISPOSING AND RECYCLING YOUR PRODUCT
**** This symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed of in the household waste but sent for recycling. Please take it to a collection point designated by your local authorities once it has reached the end of its life, some will accept products for free. By recycling the product and its packaging in this manner you help to conserve the environment and protect human health.
D-Link and the environment
At D-Link, we understand and are committed to reducing any impact our operations and products may have on the environment. To minimise this impact D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging.
D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions.
To learn more about our environmentally responsible products and packaging please visit www.dlinkgreen.com.

Ver. 1.00(WW) 2022/12/01

Documents / Resources

| D-LINK DMS-108E 8 Port Multi Gigabit Desktop Switch [pdf] Installation Guide
DMS-108E 8 Port Multi-Gigabit Desktop Switch, DMS-108E, 8 Port Multi-Gigabit Desktop Switch, Multi-Gigabit Desktop Switch, Gigabit Desktop Switch, Desktop Switch, Switch
---|---