PETLIBRO PLAF103 Automatic Cat Food Dispenser User Manual

June 14, 2024
PETLIBRO

PETLIBRO PLAF103 Automatic Cat Food Dispenser

Please read this manual before using the product and keep it for future reference. Or open the PETLIBRO app and go to DEVICE SETTINGS>
Instructions for the digital manual and instructional video.

IN THE BOX

PRODUCT OVERVIEW

  1. Lid
  2. Seal Strip
  3. Food Tank
  4. Transparent Window
  5. Tank Base
  6. Anti-Clog Detector
  7. Control Panel
  8. Display Panel
  9. Food Outlet
  10. Feeder Base
  11. Stainless Steel Bowl
  12. Bowl Holder
  13. Desiccant Bag Holder
  14. Power Port
  15. Battery Compartment
  16. Battery Compartment Cover
  17. Speaker

Display area

Indicator Type Indicator Status Device Status
Low food level indicator (red) On Low food storage level
Lock indicator (white) On The buttons are locked

Wi-Fi indicator (white)

| Flashes once every one second| Network configuration mode
Flashes twice every second| The device is connecting to W-Fi
Flashes three times every second| Firmware update
On| W -Fi is connected
Off| W -Fi is turned off
Warning indicator (red)| On| Low battery level, the food gets stuck, or something is wrong with the motor

Buttons

GETTING STARTED

Installation

  1. Turn the lid counterclockwise to remove it.
  2. Place the desiccant bag in the desiccant bag holder under the lid.
  3. Add dry pet food to the food tank.
  4. Replace the lid and turn it clockwise.
  5. Install the stainless steel bowl and bowl tray.

Power on

  1. Connect the feeder to a wall outlet with the power adapter and power cable, and it automatically turns on.
  2. Install three D alkaline batteries into the battery compartment in case of a power outage.

Notes

  • To avoid a sudden power outage that affects the feeding of your pet, do not use the batteries as the only power source. The batteries can only be used as an emergency plan.
  • When the power adapter, power cable, and batteries are used at the same time, the feeder will only draw power via the power cable.
  • When the feeder is powered only by batteries, the Wi-Fi function, play button, and reset button would be disabled to extend the working time, but the meal schedules would be carried out normally

Power off
Unplug the cable from the outlet and remove the batteries.

**APP CONTROL

**

Network, router & system requirements 

  • The feeder supports 2.4GHz and 5GHz Wi-Fi.
  • Keep the feeder close to your router for a better Wi-Fi connection. The ideal range is within 6m (19. 7ft) without obstacles and walls.
  • Supports iPhones running iOS 12.0 or later and Android smartphones running Android 5.0 or later.

Install the app & login 

  1. Scan the QR code below or search “PETLIBRO” in the App Store or Google Play to download the app.
  2. Sign up and log into your account.

Automatically add the device
Turn on the Bluetooth and location services on your phone before adding a device.

  1. Open the app and tap the”+” symbol.
  2. The app will automatically search nearby devces. Tap the device you want to add and follow the on-screen instructions.

Manually add the device

If the app can’t find any devices, you can manually add the device.

  1. Tap the device you want to add to the “ADD MANUAL­LY” list and follow the on-screen instructions.
  2. Tap the device for controls.
    Note : All successfully added devices will appear in the Home page.

Device controls & settings

Feedback & FAQ

Go to Me> Feedback in the app to chat with a customer service staff online or send an inquiry email. You can also check the FAQ in the app.

Recommended feeding portions

Model| Daily Intake| Meals per Day| Portions

per Meal

| Per Portion
---|---|---|---|---

PLAF103

|

1/2 cup

| 2| 3 3|

1 / 12 cup (20ml)

3| 2 2 2
4| 1 2 1 2

1/3 cup

| 2| 2 2
3| 1 2 1
4| 1 1 1 1

2/3 cup

| 2| 4 4
3| 2 3 3
4| 2 2 2 2

3/4 cup

| 2| 4 5
3| 3 3 3
4| 2 2 2 3

9/10 cup

| 2| 5 6
3| 3 4 4
4| 2 3 3 3

1cup

| 2| 6 6
3| 4 4 4
4| 3 3 3 3

11/4 cup

| 2| 7 8
3| 5 5 5
4| 3 4 4 4
11/2cup| 3| 6 6 6
4| 4 5 4 5

11/3 cup

| 2| 8 8
3| 5 6 5
4| 4 4 4 4
12/3 cup| 3| 6 7 7
4| 5 5 5 5

CARE AND MAINTENANCE

  • Power off the device before cleaning.
  • Clean the lid, food tank, tank base, stainless steel bowl, and bowl tray with tap water.
  • Do not clean the feeder in a dishwasher. Only the stain­less steel bowl is dishwasher-safe.
  • Use a soft dry cloth to clean the feeder base. Do not wash any part with electronic components.
  • Replace the desiccant bag every half a month to keep food fresh.
  • Remove the desiccant bag before cleaning the lid.

Disassemble for cleaning

  1. Remove the lid and take out the desiccant bag
  2. Make sure the food tank is empty. Pull the notches on both sides of the food tank outward a little and then up to remove the food tank.
  3. Hold the feeder base, turn the tank base counterclock­wise, and lift the tank base.
  4. Remove the stainless steel bowl and bowl tray from the feeder.
  5. Thoroughly rinse and air-dry the lid, food tank, tank base, stainless steel bowl, and bowl tray.

TROUBLESHOOTING

  • If the feeder is not dispensing food, make sure you have filled the tank with enough food.
  • If the feeder won’t turn on, check if the power adapter, power cable, or batteries are correctly installed.
  • Please make sure the food in the tank is dry, and food size is within 2-1 Smm (0.07-0.6in) in diameter.
  • If the food won’t come out, remove the food tank and tank base, and check if the chute inside is blocked.
  • If the food won’t come out, check whether the battery level is low, whether the power adapter is connected, and whether a power outage occurs when the power adapter is connected but batteries are not installed.
  • The first few portions may vary, but it doesn’t mean the feeder is faulty. After about 6 feedings, portions should be almost even.

SPECIFICATIONS

Model PLAF103
Input AC 100-240V 50/60Hz
Capacity SL
Battery power option 3 x D alkaline batteries
Operating T e mp e rature 0°C-40°C I 32°F-104°F
Dim e nsions 340 x 190 x 190mm /

13.4 x 7.5 x 7.Sin

Net w e ight| 1.66kg / 3.66Ib
Model| PLAF103
---|---
Input| AC 100-240V 50/60Hz
Capacity| 3L
Battery pow e r option| 3 x D alkaline batteries
Operat i ng Temperatur e| 0°C-40°C I 32°F-104°F
Dimensions| 274 x 190 x 190mm/

10.8 x 7.5 x 7.Sin

Net weight| 1.54kg / 2.4Ib

SAFETY INSTRUCTIONS

  • Dispose of all packaging materials properly. Some items may be packed in plastic bags; these bags could cause suffocation. Keep them away from children and pets.
  • Do not use the feeder with pets that are not able to I reach the food tray or with any physical disability.
  • Do not immerse the base part in water at any time as it may damage electronic components like the control panel.
  • Do not use the feeder outdoors. Check its operation frequently to be sure it is spent ng properly.
  • Do not use wet, canned or moist food.
  • Do not disassemble the feeder other than as instructed in this user manual.
  • Only use accessories recommended or sold by the manufacturer. The use of accessories not recommended or sold by the manufacturer may cause an unsafe condition.
  • Do not modify the pet feeder.
  • Examine the feeder after installation. Do not plug in if there is water on the power cable or plug.
  • To avoid tripping, a way to position the power cable out of the way of foot traffic.
  • Do not install or store the pet feeder where it will be exposed to weather Or temperatures be Ow OOC (32 OF).
  • Use D alkaline batteries to power the feeder. Do not use rechargeable batteries.
  • Check the batteries regularly. Before leaving for an extended period of time, always replace batteries with new ones.
  • Do not lift the pet feeder by the lid, food tank, or food bowl. Lift and carry it using both hands and the base, while keeping the feeder in an upright position.
  • Suitable for dry food only, with kibble sizes ranging from 2 15mm (0.07-0.6in) in diameter. Larger kibble may get stuck at the food outlet.
  • Do not put your fingers into the food outlet or et your fingers touch the rotor.
  • Power off the device when it’s not in use.

WARRANTY

  • 12-month warranty
  • For guidance on product use, please contact our customer service team via email: support@petlibro.com.

FCC statement

NOTICE
This device complies with Part 15 of the FCC Rules. Oper­ation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired opera­iton.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep­tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV techni­cian for help.

This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or trans­mitter.

Radiofrequency exposure statement
To maintain compliance with the FCC’s RF Exposure Guidelines, this equipment should be installed and oper­ated with a minimum distance of 20cm from your body.

GRANARY
Automatic Pet Feeder – Wi-Fi Control 31/SL
@Li bro Corp. All Rights Reserved.
Model: PLAF103
Manufacturer: Shenzhen Li bro Technology Co., Ltd. Address: 12/F, Tower B, GALAXY WORLD, Yabao Road, Longgang District, Shenzhen, China
JP Importer: itUi;x;¥
Made in China
PLAF103_V3.0

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

PETLIBRO User Manuals

Related Manuals