AUSDOM Magkey12.9 Tablet Keyboard Cases User Manual

June 14, 2024
AUSDOM

AUSDOM Magkey12.9 Tablet Keyboard Cases

Thank you for purchasing AUSDOM Tablet Keyboard Cases

Product Overview

AUSDOM-Magkey-12.9-Tablet-Keyboard-Cases-FIG-1

Note: Please adjust the keyboard within the allowable angle range, as shown in the figure above. Otherwise, it may be damaged.

Packing List

  • 1* Keyboard Case
  • 1* USB-C Charging Cable
  • 1* User Manual

Bluetooth Connection

  1. Open the keyboard case, the power indicator turns to red for 3 seconds and then goes out, and the keyboard is turned on automatically.
  2. The keyboard will automatically enter ‘Bluetooth pairing mode’ after the first successful power on. You can also press and hold for 3 seconds to enter pairing mode. In the Bluetooth pairing mode, the Bluetooth pairing indicator will flash rapidly.
  3. Go to Settings and turn “Bluetooth” on.AUSDOM-Magkey-12.9-Tablet-Keyboard-Cases-FIG-3
  4. Search for “AUSDOM Magkey12.9” and Click “Pair”.AUSDOM-Magkey-12.9-Tablet-Keyboard-Cases-FIG-4
  5. The keyboard is connected, pairing successfully.AUSDOM-Magkey-12.9-Tablet-Keyboard-Cases-FIG-5

Note

  1. If the keyboard is turned on for 3 minutes without pairing, it will enter sleep mode and stop pairing until you press any key or long-press  for 3 seconds.
  2. If the keyboard has already been paired with iPad, they will automatically connect next time without pairing again.

Sleep Mode

  1. When you do not use the keyboard for more than 30 minutes, the keyboard will automatically go to sleep mode and be disconnected from devices.
  2. Before using the keyboard, please press any key to wake it up and the keyboard will automatically connect to the device within 3 seconds.

Charging

When the power of the keyboard is too low, the power indicator light will flash red. Please recharge it in time to ensure normal use.

Note: When the power level is low, the transmission of the keyboard will be delayed, stuck and unstable.

Function Key Description

AUSDOM-Magkey-12.9-Tablet-Keyboard-Cases-FIG-7AUSDOM-Magkey-12.9-Tablet-Keyboard-Cases-FIG-8

Indicator

Bluetooth version V5.0
Bluetooth Pairing Name AUSDOM Magkey12.9
Wireless Range 8m
Battery Capacity 750mAh
Continuous working time with backlight on >8.5 hours
Continuous working time with backlight off >750hours
Standby Time >365 days
Charging Time <3 hours
Keys Life 3 Million Strokes

Schematic Diagram of Touchpad Functions

AUSDOM-Magkey-12.9-Tablet-Keyboard-Cases-FIG-9AUSDOM-Magkey-12.9-Tablet-Keyboard-Cases-FIG-10

Specifications

Bluetooth version V5.0
Bluetooth Pairing Name AUSDOM Magkey12.9
Wireless Range 8m
Battery Capacity 750mAh
Continuous working time with backlight on >8.5 hours
Continuous working time with backlight off >750hours
Standby Time >365 days
Charging Time <3 hours
Keys Life 3 Million Strokes

Note: Features and technical specifications are subject to change without notice, we apologize for any inconvenience.

Warranty

The Keyboard is covered by a 1-year manufacturer warranty. For more information, visit www.ausdom.com

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled under European directive 2012/19/EU to be recycled or dismantled to minimize its impact on the environment. Users have the choice to give their product to a competent recycling organization or the retailer when they buy new electrical or electronic equipment.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

For more information, please visit our official website www.ausdom.com Your valuable comments and suggestions on improving AUSDOM products are welcome!

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals