LLIVEKIT KJ320F Air Purifier User Manual

Air Purifier
User Manual

Thank you for purchasing our products.
Please read the instruction manual carefully before using this product.

Safety important reminder

• Please read this instruction manual carefully before use and keep it for future reference.
• When we use electrical appliances, we should have the most basic safety knowledge to avoid fire, electric shock and other injuries. Therefore, please follow the instructions below

| Electrical appliances should be safe,Avoid the risk of fire, electric shock and injury.
---|---
| Do not place the adapter under the carpet or near a heat source.
| When the replacement filter indicator lights up, replace the consumables to ensure the cleanliness of the air purifier.
| Do not use the adapter or product when it is damaged.
| Do not use the machine without the filter installed.
****| Do not use the air cleaner in places that are exposed to moisture or water splash,such as bathroom, kitchen,beside the sink or basement that is serious damp.
| This air purifier must be used upright.
| Do not let items fall into the machine from the air outlet, as this will damage the air purifier.
| Do not sit, stand or place items on top of the air purifier.
| Do not use an air purifier in the presence of flammable gases or vapors.
| Do not use an air purifier in the presence of flammable gases or vapors.
| If the power cord is damaged,it must be replaced or repaired by the manufacturer or its authorized service network and maintenance ersonnel in order to avoid danger.

Preparation before use

• Remove the air purifier from the box and place it on a flat floor. The body is surrounded by walls or other furniture at least 50 cm to facilitate air circulation.
• Note: Before using the machine, be sure to remove all packaging materials (especially those on the filter net) to avoid blocking the air inlet.

Product name and specification

Operational guidance

ATTENTION

• This product is not recommended for users with physical, sensory, mental abilities, experience or lack of knowledge.Use (including children), except under the supervision or direction of the person responsible for its safety.
• Children should be supervised to ensure that children do not play with electrical appliances.
• If the product needs to be shut down during use, please press the “Power” button on the control screen to shut down normally and then pull out the Power. Abnormal Power failure may cause product failure.

Plug-in operation
Make sure the machine is level on a level surface so that the bottom microswitch is pressurized. When the power is plugged in, the air purifier will sound “B”, all the indicators will light off after 0.5 seconds, and the air purifier will enter the standby state.
Power on/off
Press ( ), the air purifier will sound “B”, the machine will run in automatic gear, the wind speed will be adjusted according to the air quality; press ( ) again, the machine will stop running and return to the standby state.
Air quality display
After power-on, the LED air quality indicator will change according to the PM2.5 value (green light / blue light / red light difference). The PM2.5 value is displayed on the screen.
Plug-in operation
Press ( ), the machine goes to sleep, except the light is on, the other lights are off. In this mode, the wind speed runs in the first gear. When the sleep button is touched again, it returns to the last running state. In the sleep state, other buttons are invalid.
Timing setting
Press ( ), the machine enters the timing setting, and displays 1H, 2H, 3H 12H to set the machine off time.At 12H, press ( ) again to cancel the timing.
Negative ion
When the machine is in wind speed mode, touch ( ) to turn negative ions on or off. When the machine is in automatic mode, the machine will judge the opening or closing of negative ions according to the air quality.
Child lock
Press and hold for 3 seconds ( ) to turn the child lock function on or off. When the child lock function is activated, touching other buttons is invalid.If the child lock function is started in the regular state, the machine can be started only after it is unlocked after being closed.
Wind speed
Touch ( ) to adjust the wind speed of the machine. The higher the speed, the higher the wind speed.
Filter reset
When the machine runs for a certain period of time, the Filter will flash in red. At this time, you should replace it with a new filter. Press and hold for 3 seconds ( ) to clear the accumulated time and the Filter stops flashing.
Special reminder: if the filter is replaced before the indicator light of the filter is on, the filter timer will not be reset, and continue to calculate the life of the last filter. As a result, the filter replacement light may soon be bright red.
Automatic file
When the machine is running in automatic mode, the machine will adjust the wind speed, the color of the LED light, and whether the negative ions are turned on according to the air quality.
A. Green: Good air quality, 0≤PM2.5<70.
B. Blue: The air quality is normal, 70≤PM2.5<150.
C. Red: The air quality is poor, 150≤PM2.5≤500.
When 0 ≤ PM2.5 ≤ 50, the fan motor operates in one gear.
When 50 < PM2.5 ≤ 100, the fan motor operates in the second gear.
When 100 < PM2.5 ≤ 150, the fan motor operates in third gear.
When 150 < PM2.5 ≤ 200, the fan motor operates in the fourth gear.
When 200 < PM2.5 ≤ 500, the fan motor operates in five gears.
When 150 < PM2.5 ≤ 500, the negative ions will automatically turn on.

Filter reset guidance

1. Disconnect the power and turn the machine upside down.
2. Rotate the bottom cover counterclockwise,Loosen the bottom cover and remove it.
3. Take out the filter.
4. After removing the new filter from the bag,Loaded inside the machine.
5. Install the bottom cover and lockit clockwise Turn the machine around.
6. Turn the machine around.

Common trouble shooting

Confirmation matters before fault declaration.
Confirm the following matters before the product is entrusted to the customer service center for repair due to exception.

inserting power plug.
Is the machine not flat, causing the bottom micro switch not closed?| Re- operate after confirming the machine flat.
The product has no air flow out| Are all packages of the filters removed?| Ensure that all packages have been removed.
Is there anything blocking the air outlet above the purifier?| If any object blocks the air outlet, move the object out of the air outlet.
“Filter” light flashing red| | Press the reset button ( )
for more than 3s to reset after filter replacement.
There is abnormal sound| Is there “peep” sound?| “Peep” sound will be generated when the anion is released. It is normal sound in product operation. Please rest assured.
Excessive product sound| Are all packages of the filters removed?| Ensure that all packages have been removed.
The air quality indication is always red.| Is there unfound dust or peculiar smell inducing substance indoors?| Move the machine to a dean room, if the red light is still always on, the sensor line may be abnormal.
Please contact the customer service center.
The air quality indicator light is always red/blue/green, but the air volume is still unchanged.| Is it in auto mode status?| Set to auto mode.The air volume will not be changed automatically in manual wind speed mode.

Air Purifier

Warranty & Customer Support
If you need any assistance, please contact our support team at the address below with your Amazon order number.
Email:support@wowosz.de

MADE IN CHINA

Documents / Resources

| LLIVEKIT KJ320F Air Purifier [pdf] User Manual
B134GMmy77L, KJ320F, KJ320F Air Purifier, Air Purifier, Purifier
---|---

References

• Time by Winkler Uhren und Schmuck Onlineshop - Time by Winkler

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>