AIKELA AP031-2 Dual Wireless Microphone User Guide

: June 14, 2024
: AIKELA

Table of Contents

AIKELA AP031-2 Dual Wireless Microphone
Introduction
ID Diagram
How to use Lightning/Type-C receiver
How to use 3.5mm receiver
About UI
Q & A
Packing list
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AIKELA AP031-2 Dual Wireless Microphone

Introduction

Thanks for choosing our product.
This product is a smart wireless microphone that provides professional-grade recording output. Plug and play, no app required. It can be used in different scenes such as Live streaming, Video Recording, Interviewing, Online Teaching, etc.

The wireless Microphone consists of two parts, one is a Microphone transmitter, and the other one is a 3-in-1 multi-function receiver. (see as below picture )

AIKELA-AP031-2-Dual-Wireless-Microphone-FIG-1

ID Diagram

Windproof sponge
Indicator light of microphone
Type-c charging port of microphone
Microphone clip
The power button of the microphone
Reset key of the microphone
Type-C receiver
3.5 mm receiver
Lightning receiver
Indicator light of receiver
Power Button / Reset Key
Type-C charging port of receiver
3.5mm audio transfer interface

The function of the above will be specifically explained later

How to use Lightning/Type-C receiver

First: Plug the Lightning or Type-C receiver into the Lightning or Type-C port of the mobile phone, and the green light of the receiver flashes.

Second: Single press the power button of the mic, and the green light flashes.

The green light of both receiver and microphone is always on, pairing is successful. Open the phone camera or other APPs, microphone is ready for sound pick-up.

Special Notes:
The for number: If the mobile phone is in the low battery during live streaming, the external power supply directly charges the mobile phone through the Type-C port of the receiver,

How to use 3.5mm receiver

Step 1 : Plug the 3.5mm connector into the 3.5 jack port of the camera, and single press the power button to power on, and the green light flashes.

Step 2: Single press the power button of the microphone to power on, and the green light flashes.

The green light of both receiver and microphone are always on, pairing is successful. A microphone is ready for sound pick-up

About UI

Microphone Transmitter

Power on	Single press the power button	Green light on

Power off

| Press the power button for 3-4s / auto power off with no connection for more than 1Omin|

Green light off

Charging| Type-C cable charging| Red light on when charging,

and light off once fully charged

Lightning Receiver

Power on	Single press the power button	Green light on

Power off

| Press the power button for 3-4s / auto power off with no connection for more than 1Omin|

Green light off

Charging| Type-C cable charging| Red light on when charging,

and light off once fully charged

Type-C Receiver

Power on	Plug into the device	Green light flashes
Power off	Unplug from the device	Light off
Searching for pairing		The green light flashes slowly
Paired		Green light on
Clear pairing	Triple-press the power button

quickly within 10s after powering on

| A green light flashes quickly

Monitor volume up and down, loop control

| Double press the power button (Monitor earphone is needed to hear

the prompt tone, the earphone is not included)

| One “beep”: minimum volume Two” beep”: medium volume

Three” beep “: maximum volume

Noise reduction switch

|

Press the power button once

| Turn off noise reduction: Red light on Turn on noise reduction: Green light on

3.5mm Receiver

Power on	Single press the power button	Green light flashes
Power off	Press the power button for 3s	Light off
Searching for pairing		The green light flashes slowly
Paired		Green light on
low battery	The battery is in low-power	Red light flashes

Clear pairing

| Triple press the power button quickly within 1Os after the power

on

|

The green light flashes quickly

Monitor volume up and down, loop control

| Double press the power button (Monitor earphone is needed to hear the prompt tone, earphone is not

included)

| One “beep”: minimum volume Two” beep”: medium volume Three” beep”: maximum volume
Noise reduction switch| Press the power button once| Turn off noise reduction: Red light on Turn on noise reduction: Green light on

Note: You can listen to the video or recording only after the receiver is unplugged from the device.

Some Android phones may have incompatibility issues due to operation system limits. Please see below instructions and compatibility list.

Type-C connector compatibility issues

If the mobile phone has OTG function, please manually turn on OTG
When connecting the receiver to an OPPO mobile phone via the USB-C adapter, it is required to set Default Recording Device to External Device as below: Settings > Sound&Vibration > Other settings > Default recorder > Add on
Android phone compatibility list

SAMSUNG

| Galaxy 59| Galaxy 520 Ultra SG| Galaxy Note20 Ultra SG
---|---|---|---
Galaxy 510| Galaxy 520 PE SG| Galaxy A6s
Galaxy 510+| Galaxy 521+ SG| Galaxy A9s
Galaxy 510 4G+| Galaxy 521 Ultra SG| Galaxy A90 SG
Galaxy SlOe| Galaxy Note9| Galaxy Fold 4G
Galaxy 520| Galaxy Note10 SG| Galaxy Z Fold2 SG
Galaxy 520 +SG| Galaxy Note20| W2019

HUAWEI/ HONOR

OPPO

XIAOMI

VIVO

| 55| XSO Pro| Y9s
57| X60 Pro+| Y31s
59| IQOOS| Y73s
X27| IQOO Neo| Nex3
X27 Pro| IQOO Neo3|
so| IQOO Pro|

Q & A

Q: Why can’t be used on Android phones?
A: Some Android phones may have incompatibility issues due to operational system limits. Please see the instructions previously.
Q: Why microphone can not connect with the receiver?
A: No matter whether the indicator lights on both the microphone and receiver flash slowly or quickly, Please factory reset as per the below instructions:
- Power on the microphone and poke the reset key twice quickly with a pin, green indicator lights flash quickly
- Press the power button to power on the receiver, triple press the reset key, and the green indicator lights flash quickly
- Then the microphone and receiver will pair successfully and the indicator lights will stay on.

AIKELA-AP031-2-Dual-Wireless-Microphone-FIG-10

Q: Do the receiver and microphone need to be charged?
A: Yes, you can use a Type-C charging cable to charge the receiver or microphone.
Q: What should I do if there is no sound in the recorded video?
A: Please confirm below 4 situations:
- Confirm whether the connection is successful: The indicator lights of the microphone and receiver are always on, which means the connection is successful. Only when the connection is successful can the recording sound be started?
- This microphone supports the Mute on (Blue light is on the microphone) and Mute off (green light is on the microphone), make sure the green indicator light of the microphone stays on when recording.
- You need to unplug the receiver from the phone to hear the sound after the recording is done
- Confirm whether the phone volume is not at 0, and adjust properly.