BT VBM7500 Video Baby Monitor 7500 Lightshow User Guide

: June 13, 2024
: BT

Table of Contents

BT VBM7500 Video Baby Monitor 7500 Lightshow
Product Information
Product Usage Instructions
Getting set-up
Pair to your Parent unit
Multi-cam mode
Audio cycling feature
Contact Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BT VBM7500 Video Baby Monitor 7500 Lightshow

BT-VBM7500-Video-Baby-Monitor-7500-Lightshow-product

Product Information

The Additional Camera Video Baby Monitor 7500 Lightshow is a device that allows you to monitor your baby remotely. It is designed to work in conjunction with the Parent unit of the Video Baby Monitor 7500 Lightshow system. With the additional camera, you can expand your monitoring capabilities and have a clearer view of your baby’s room.

Key Features:

Easy setup and installation
Micro USB cable for power
Pairing functionality with the Parent unit
Multi-cam mode for viewing multiple cameras
Audio cycling feature to rotate audio between paired cameras

Contact Information:
If you need any assistance or have questions regarding the product, you can reach out to BT’s Technical Help & Support at 0808 100 6554. Alternatively, you can visit bt.com/producthelp for further guidance.

Environmental Responsibility:
BT is committed to reducing its environmental impact. To learn more about their efforts and initiatives, visit bt.com/betterfuture.

Product Usage Instructions

Getting Set-Up:

Place the Additional camera between one and two meters away from your baby for optimal performance. Ensure there is enough slack in the power cable for free panning of the camera.
Connect one end of the micro USB cable to the power plug and the other end to the Additional camera.
Plug the power plug into a power socket and switch it on.

Pairing to the Parent Unit:

Ensure you are at least 2-3 meters away from the Additional camera and access the Menu on your Parent unit.
Select “Cameras” and then choose “Pair Additional Camera”.
Follow the on-screen prompts and press and hold the Nightlight button on the Additional camera for 10 seconds. The units will automatically pair together.

Multi-Cam Mode:
If you have multiple Baby units (cameras) paired to your Parent unit, you can switch to multi-cam mode to view different cameras:

Tap on the multi-cam icon you want to view.

Audio Cycling Feature:
The audio cycling feature allows you to rotate the audio between your active paired cameras. Follow these steps to enable or disable this feature:

Tap the Audio Cycle icon to switch it on. The screen will display “Audio will rotate between all paired cameras for 5 seconds” and the icon will turn green.
To turn off the audio cycling feature, tap the Audio Cycle icon again. The icon will turn grey.

For further details and comprehensive instructions, please refer to the full Video Baby Monitor 7500 Lightshow User Guide available at bt.com/producthelp.

Getting set-up

To get the best performance, place your Additional camera between one and two meters away from your baby. Make sure there’s enough slack in the power cable so the camera can pan freely.
Plug one end of the micro USB cable into the power plug and the other end into the Additional camera.
Plug the power plug into the power socket and switch the power on.

Pair to your Parent unit

Ensure you are at least 2-3 meters away from the Additional camera and enter the Menu of your Parent unit.
Tap Cameras, then tap Pair Additional Camera.
Follow the on-screen prompts and press and hold the Nightlight button on the Additional camera for 10 seconds. The units will automatically pair together.

Multi-cam mode

When you have more than one Baby unit (camera) paired with your Parent unit, the signal icon in the middle of the top row of the Parent unit screen will change to the multi-cam icon .
You can tap on the multi-cam icon to choose which camera you want to view.

Audio cycling feature

You can switch the audio cycling feature on to rotate the audio between your active paired cameras. The audio will rotate every 10 seconds.
No cry alerts will be shown in multi-cam mode when audio cycling is on.

Tap the Audio Cycle icon to switch on.
The screen will show “Audio will rotate between all paired cameras” for 5 seconds and the icon will turn green.
To turn it off, tap again. The icon will turn grey.

For a Better Future

We’re always looking to make our products last longer and use less power, so we don’t have such a big impact on the environment.
To find out about what we are doing, visit bt.com/betterfuture.

Offices worldwide
© British Telecommunications plc 2014