AIKELA EP033T Dual Wireless Microphone Instructions
- June 14, 2024
- AIKELA
Table of Contents
EP033T
EP033T Dual Wireless Microphone
Q & A:
Q: Why microphone can not connect with receiver ?
A: Please factory reset as below instructions:
- Power on both microphone or receiver (The receiver needs to be plugged into your device)
- Poke the reset key twice quickly by a pin on both microphone and receiver, indicator lights flashes quickly, then they will auto pairing and indicator lights stays on.
Q: What should I do if there is no sound in the recorded video?
A: Please confirm below 4 situations:
- Confirm whether the connection is successful: The indicator lights of the microphone and receiver are always on, which means the connection is successful. Only when the connection is successful can the recording sound be started.
- This microphone supports Mute on (Blue light is on microphone) and Mute off (green light is on microphone), make sure the green indicator light of microphone stays on when recording.
- You need to unplug the receiver from the phone to hear the sound after recording is done
- Confirm whether the phone volume is not at 0, and adjust properly.
Q: Do the microphone need to be charged?
A: Microphone need to be charged with included Type-C charging cable when it’s
running out of power. You may see blue light flashes on the microphone.
Q: Can I turn off the noise reduction function of the microphone?
A: No. The microphone has a built-in noise reduction chip with AI Intelligent
noise reduction technology to enhance your sound quality which can’t be
switched off.
Q: Can it be used as a amplifier?
A:lt is a microphone to pick up sound only, not a loudspeaker.
AP033
Q & A:
Q: Why can’t be used on Android phones?
A: Some Android phones may have incompatibility issues due to operation system
limits.
Please consult your dealer for details
Q: Why microphone can not connect with receiver ?
A: No matter the indicator lights on both microphone and receiver flashes
slowly or quickly, Please factory reset as below instructions:
- Power on the microphone and poke the reset key twice quickly by a pin, green indicator lights flashes quickly
- Press the power button to power on the receiver, triple press the reset key, green indicator lights flashes quickly
- Then the microphone and receiver will auto pairing successfully and indicator lights stays on.
Q: Do the receiver and microphone need to be charged?
A: Yes, you can use a Type-C charging cable to charge the receiver or
microphone.
Q: What should I do if there is no sound in the recorded video?
A: Please confirm below 4 situations:
- Confirm whether the connection is successful: The indicator lights of the microphone and receiver are always on, which means the connection is successful. Only when the connection is successful can the recording sound be started.
- This microphone supports Mute on (Blue light is on microphone) and Mute off (green light is on microphone), make sure the green indicator light of microphone stays on when recording.
- You need to unplug the receiver from the phone to hear the sound after recording is done
- Confirm whether the phone volume is not at 0, and adjust properly.
Q: Do the microphone need to be charged?
A: Microphone need to be charged with included Type-C charging cable when it’s
running out of power. You may see blue light flashes on the microphone.
Q: How about the sound quality of this wireless microphone?
A: The microphone has a built-in noise reduction chip with AI Intelligent
noise reduction technology to enhance your sound quality, recommended to use
in nosie environment. And it do support nosie reduction off if you need more
clearly voice in quiet environment.
Q: Can it be used as a amplifier?
A: lt is a microphone to pick up sound only, not a loudspeaker.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>