oneisall C1nIsa6T6nL Dog Clippers for Grooming User Manual
- June 14, 2024
- Oneisall
Table of Contents
oneisall C1nIsa6T6nL Dog Clippers for Grooming User Manual
PRODUCT PARTS
-
Brush
-
Oil bottle
-
Protective cover
-
USB charging cable
-
1.5mm Comb row
-
3mm Comb row
-
4.5mm Comb row
-
6mm Comb row
-
10mm Comb row
-
13mm Comb row
Using Methods
-
Press the power, the display light up.
-
fine-tune the cutter Adjust the cutter by rotating the taper lever from forward.
-
ount the limit comb:
-
Align the limit comb with the lade edge
-
Slightly forward push to mount it.
-
Disassemble the limit comb:
Just pull hard the limit comb.
Travel lock function
Press and hold the switch for 3 seconds, the product is locked, and the red
indicator light flashes for 3 seconds;
Press and hold the switch for 3 seconds while the red indicator light flashes
for 3 seconds, the product is turned on.
Cleaning & Maintenance
Every 60 minutes of use, the oil bottle symbol on the display flashes to indicate Add lubricating oil.
Tips
-
To ensure the normal operation of the blade, please do not disassemble the cutter head!
-
To clean the blade you can use the matching brush to gently sweep away the excess hair.
-
It can be washed under the faucet.
-
After rinsing, please wipe clean with a dry cloth.
-
Drip matching lubricating oil on the blade.
-
After maintenance, put the protective cover on the cutter head to protect the cutter head.
Plug-in Using Methods
- Turned off the machine, plug the USB cable into the 5V/1A adapter (desktop/mobile power and other power supplies with USB interface) to charge (the charging indicator will light up)
- The display will show the charging status, just unplug the charging cable after it is fully charged.
Battery percentage display(1%-100%)
Left-Add oil indication It needs to add oil to the blade when the light is on Right-Charging Indication Charging light will flash when power’s less than 15%. Please charge immediately
Work while charging is available (Please turn off the machine before charging)
Charging Instructions
- Please charge for 3 hours when purchasing a new product for the first time. After 3 to 4 times of full charge and discharge, the battery capacity will reach the best condition.
Specifications| Product name: Electric Dog Clippers| Model:RFC-676
---|---|---
voltage: 3.7v| Battery type: 2000mAh
Output: 5W-1A| Power:10w
Charging Time: 3H| Working time: 4H - The best ambient temperature for charging use is between 5°-40°C.
Problem | Problem Causes | Solution |
---|---|---|
The product heats up during use | Trimming parts attached to debris |
Support@oneisall.com
Does not work| The battery is broken| please contact the mailbox:
Support@oneisall.com
Other| please contact the mailbox: Support@oneisall.com
Can’t charge| The charging environment emperature is too high or too low|
Charging in an environment in 40 C or 50 C
Q & A
Q: Any suggestions before using electric clippers?
A1 : It is recommended to wash and dry the pet first.
A2 : It is recommended that if the hair is too long, trim with scissors
and comb first.
A3: It is recommended that before and after using the electric hair clipper, a
little oil should be dripped on the cutter head for lubrication and
maintenance.
Q: What does the limit comb 1.5mm, 3mm, 4.5mm, 6mm, 10mm, 13mm mean? How to
use it?
A1: You can choose according to your pet’s hair retention needs.
Q: Can this pet clipper be used on pets’ faces? How many decibels is the
noise?
A1: It is not recommended to use the face. The noise is controlled within 55
db.
Q: Can it be used while charging? Charging time and working time?
A1: It can be directly connected to the charger for wired operation.
A2: 3 hours of charging and 4 hours of working.
Q: Can Dog clippers be washed?
A1: The product can be washed under the tap, IPX6 waterproof
Q: Will the blade get hot?
A1: After the product has been working for 30 minutes, the temper- ature of
the cutter head is about 36°C (96.8°F), and the temperature is within the
acceptable range of somatosensory.
Q: What should I do if the battery cannot be charged or turned on?
A1: You can contact our after-sales service as soon as possible, the email is:
Support@oneisall.com.
A2: If it is not used for a long time, it is recommended to charge the hair
clipper at least once every three months to ensure battery life.
Lifetime Replacement Guarantee
Thanks for your purchase. We always stand behind our quality products, if you ever have any issues with your purchase, please contact us for a free replacement or refund. We will get back to you within 24 hours.
customer support Email
Warranty Card
LIFETIME REPLACEMENT GUARANTEE
Thanks for your purchase. We are always stand behind of our quality products, If you ever have any issues with your purchase, please contact us for free replacement or refund. We will get back to you within 24 hours.
Customer Support Email: support@oneisall.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>