oneisall C1WjaAQrWkL Professional Dog Clipper Low Noise Razor User Manual

June 13, 2024
Oneisall

oneisall C1WjaAQrWkL Professional Dog Clipper Low Noise Razor User Manual
oneisall C1WjaAQrWkL Professional Dog Clipper Low Noise
Razor

SPECIFICATIONS

Professional Electric Clipper Motor Operating voltage:3. 7V

Material: anti-wear brass
Battery| High-performance lithium battery
Charging time: about 70-80 minutes
Operating time with full charge: 70-80 minutes
Specific Adapter| Input: 110V-240V 50/60Hz
Output: DC 5V 1000mA

HOW TO USE

I. Fixed-length function

A: Limited comb function to trim for crew cut or the side hair. Special length: 6 kinds (3,6,9,12,15,18mm) of length adjustable to control the length of hair.
B: Blade lirnit regulator: 5 kinds of length adjustable from 0.8mm-2.0mm.

  1.  Determine the hair length you need.
  2. Select the appropriate limit camb (3/6/9/12/15/18mm).
  3. Fine tune the blade: Move the ring left and right to ad just the blade(0.8mm-2.0mm

HOW TO CHARGE

  1. Put the rechargeable batteries into the haircut machine and plug the charging cable to charge.
  2. The red indicator light is on which means that it is charging.
  3. The red indicator light will turn into green when it is fully charged.

CLEANING & MAINTENANCE

Taper Blade Cleaning

  1. Clear up the blade with cleaning brush.
  2. The blade can be removed out for cleaning.
  3. The moving blade can be turned back, and then clean the hair between the moving blade and the fixed blade

Taper Blade Maintenance

Before or after usage, maintain the blade by dripping some oil on circular area like the right picture.

CAUTION

  1. Please do not disassemble the product.
  2. Do not use water to wash the clipper, and keep it away from the dampness when operating.
  3. The product can only be cleaned by water or mild soap solution.
  4. Never charge the product in the environment which is above 40 °C or below 0°C.
  5. Slight heat during the operation or charging is a normal phenomenon.
  6. Please take out of the battery if it is out of power and throw it into the designated recycling site. Never dump it randomly.

Company logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals