Audiovance CF201 Wireless Running Headphones User Manual
- May 16, 2024
- Audiovance
Table of Contents
- What’s in the box
- Wearing
- Charging
- Power On/Off
- Pairing
- Re-Pairing
- Controls
- Definition of abbreviation
- X1, X2, X3: Tap once/twice/Three times, and so on.
- +: Button
- Specification
- Tips
- Warning
- Customer Service
- support@audiovance.com Follow Audiovance
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Audiovance CF201 Wireless Running Headphones User Manu
What’s in the box
CF201 Headphones x 1
Charging Cable x 1
User Manual x 1
- LED
- Button
- Button
- Microphone
- Speaker
- Magnetic charging pins
Wearing
- Wear the headphones as below picture. Let the speakers ⑤ face your ear canal.
- Adjust gently until you find the most comfortable and secure position.
Charging
- After using, please fully dry off headphones and charging pins before charging to avoid short-circuit damage.
- Use a certified power supply with 5V output to prevent any damage.
- LED ① shows red while in charging, shows blue while being fully charged.
Red
-In charging
Blue
– Fully charged
Power On/Off
- Press ② Button over 5s, headphones will turn on/off.
- While charging, headphones will turn off automatically.
5s-Power On/Of
Pairing
For brand new headphones, please fully charge them before pairing.
Manual Pairing
-
Turn o n the headphones. They will automatically enter the Bluetooth pairing mode .
-
Choose “Audiovance OpenComfy 201” to connect.
Automatic Pairing
Only when the headphones paired with a device before, from the second
time, wireless connection with that device will automatically establish
when you turn on the headphones.
Re-Pairing
To exit from an unwanted AUTOMATIC PAIRING device, and start a pairing with new device.
- Turn off the headphones.
- Press ② Button and ③ Button simultaneously for over 5s, until LED flashes white and blue over 1
Controls
Definition of abbreviation
X1, X2, X3: Tap once/twice/Three times, and so on.
1s, 2s, 3s: Press and hold for 1 second/2 seconds/3 seconds, and so on.
+: Button
: Button
Specification
Specifications are subject to change without notice.
| Input | 5V=80mA |
|---|---|
| Battery capacity | 100mAh x 2 |
| Charging time | 2.0hours |
| (Pvlaaryietismbey volume and content) | 7.0hours (with 70% volume) |
| Driver sizeFrequency response | 16mm x 2 |
| Impedance | 20Hz ‒ 20 kHz16Ω±15% |
| Bluetooth version | V5.3 |
| Bluetooth range | >10m/33ft |
| Bluetooth range | >10m/33ft |
| Headphones weight | 18±2g |
Tips
A) If the headphones can’t be found on your phone, but you can hear
CONNECTED tone, please check whether they’re pairing with other device
automatically because they had been paired before. Re-Pairing can solve this
problem.
B) Please fully charge the headphones prior to first-time use.
C) Please recharge the earbuds if they have been unused for over two
months.
Warning
- Never disassemble or modify your headphones for any reasons to avoid any damages and danger.
- Do not store the headphones in extreme high/low temperatures (suchas under 0℃, or over 45℃).
- Avoid using the indicator close to the eyes of children or animals.
- Do not use the headphones during a thunderstorm to avoid dysfunction and risk of electric shock.
- Do not use harsh chemicals or strong detergents to clean the headphones.
Note: please do not use headphones for a long time as it may damage your hearing
Customer Service
8-month limited warranty
Lifetime technical support
Our warranty is additional to the legal rights for consumers buying this
product.
support@audiovance.com Follow Audiovance
