Audiovance SP301 Wireless Earbuds User Manual

October 30, 2023
Audiovance

Audiovance
SP301 Earbuds
User Manual

Audiovance SP301 Wireless Earbuds

Please read manual carefully before using earbuds .Please keep this manual for future references

What’s in the box

Audiovance SP301 Wireless Earbuds - Box

Customize your fit and wearing

  • Choose the Ear Tips for a perfect fit and audio performance.
  • M-size Ear Tips are pre-installed, which fit most people.
  • Insert the earbuds into the inner canal of your ears. Turn gently until you find the most comfortable and secure position

Audiovance SP301 Wireless Earbuds - Box1

Charging

For brand new earbuds, remove the insulating sheet covered on metal pins of earbuds.
After using, please fully dry off earbuds and charging port before charging to avoid short-circuit damage.
Use a certified USB-C charging cable and power supply to prevent any damage

Audiovance SP301 Wireless Earbuds - Charging

Power On/Off

Power On Automatically
Open the charging case, the earbuds will turn on

Audiovance SP301 Wireless Earbuds - Power

Power Off Automatically
Place the earbuds into charging case and close it, the earbuds will turn off

Audiovance SP301 Wireless Earbuds - Power 1

Manual Power On/Off
When the earbuds are outside of case, press 2s for Power On, 5s for Power Off

Audiovance SP301 Wireless Earbuds - Power 2

Paring

For brand new earbuds, please fully charge them before paring
Manual Paring

Audiovance SP301 Wireless Earbuds - Power 3

Choose AudioVance SP301″ to connect
Take the earbuds out of the charging case. They will automatically enter the
Bluetooth pairing mode
Automatic Paring
Only when the earbuds were paired with a device before, from second time, wireless connections with that one will automatically establish when the earbuds aer taken out of the case

Re-Paring

To exit from an unwanted AUTOMATIC PARING device, and start a new paring with other device

  1. Please do Manual Power-Off for both earbuds simultaneously. (Ref. #4 of User Manual)Audiovance SP301 Wireless Earbuds - Re paring
  2. Keep both earbuds out of case and press their MFB simultaneously 5S. When you see White/Red LED flash alternatively, Re-pairing is doneAudiovance SP301 Wireless Earbuds - Re paring 1

Controls

Audiovance SP301 Wireless Earbuds - Control

Reset

You might need to reset the earbuds if they cannot pair with each other or with other devices.

  1. Delete Audiovance SP301″ from the Bluetooth list and turn off the Bluetooth of your phone. Keep the earbuds in ON status and outside of the charging case
  2. T”pletapLight LecheryAudiovance SP301 Wireless Earbuds - Control 1
  3. Put the earbuds into the case for charging, and the Reset is done.

For Connote pair  with other

  1. Delete Audiovance SP301″ from the Bluetooth list and turn off the Bluetooth of your phone. Keep the earbuds in ON status and outside of the charging case.
  2. Double tap L&RR earbuds simultaneously. White LED rapidly flash.Audiovance SP301 Wireless Earbuds - Control2
  3. Put the earbuds into the case for charging, and the Reset is done.

LED Light Guide

LED on Earbuds

Audiovance SP301 Wireless Earbuds - Led

Meaning LED Status
Turn on white LED lights 1S
Turn off Red LEO lights lS
Paring Master earbud white/red LED flash alternately. Slave earbud white LED

flash every 3S

LED on Charging Case

Audiovance SP301 Wireless Earbuds - Led 1

Meaning LED Status
Charging Red LED blink
Fully charged Red LED keeps on
Low battery alarm Hz quick flash 4s then power off

Specification

Input 5 V-380 mA
Output 5 V-100 mA
Battery capacity 50 mAh x 2 (earbuds); 500 mAh (charging case)
Charging time 2 hours
Playtime (varies by volume and content) 6 hours (Total 24 hours with the

charging case)
Driver size| 13 mm x 2
Frequency response| 20 Hz – 20 kHz
Impedance| 32 0±5%
Bluetooth version| V 5.2
Bluetooth range| >10 m / 33 ft

Tips

  1. To be familiar with Touch Control of earbuds, please practice Quick-Twice-Tap just on Control Area in the beginning

  2. If the earbuds can’ t be found on your phone but you can hear CONNECTED tone, please check whether they are pairing with other device automatically because they had been paired before

  3. If the earbuds do not function as expected, please try following steps to solve the issue
    Place the earbuds into the charging case and charge the earbuds. or Restart the device connected to the earbuds. or • Reset the earbuds

  4. Please fully charge the ear buds prior to first-time use.

  5. Please recharge the earbuds if they have been unused for over twmonths.

Warning

  1. Never disassemble or modify your earbuds for any reasons to avoid any damages and danger
  2. Do not store the earbuds in extreme high/low temperatures (such as under 0C, or over 45€),
  3. Avoid using the indicator close to the eyes of children or animals.
  4. Do not use the earbuds during a thunderstorm to avoid dysfunction and risk of electric shock.
  5. Do not use harsh chemicals or strong detergents to clean the earbuds
    Note: please do not use earbuds for a long time as may damage your hearing

Customer Service

18-month mited warranty
Lifetime technical support
Our warranty is additional to the legal rights consumers have buying this product
service-us@audiovance.com
UV orusA and Canada Only)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

FCC warning:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This  quipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals