Audiovance Euphony 501 Wireless Earbuds Bluetooth Headphones Instruction Manual

EU501 Earbuds User Manual, Please see page 12.
SP301 Earbuds
User Manual

Please read manual carefully before using earbuds Please keep this manual for future references

What’s in the box

Customize your fit and wearing

• Choose the Ear Tips for a perfect fit and audio performance.
• M-size Ear Tips are pre-installed, which fit most people.
• Insert the earbuds into the inner canal of your ears. Turn gently until you find the most comfortable and secure position.

Charging

• For brand new earbuds, remove the insulating sheet covered on metal pins of earbuds.
• After using, please fully dry off earbuds and charging port before charging to avoid short-circuit damage.
• Use a certified USB-C charging cable and power supply to prevent any damage.

1. Charging Earbuds ▲ Place the earbuds into the case and close the case.
2. Charging the case

Power On/Off

Power On Automatically
Open the charging case, the earbuds will turn on

Power Off Automatically
Place the earbuds into charging case and close it, the earbuds will turn off.

Manual Power On/Off
When the earbuds are outside of case, press 2s for Power On, 5s for Power Off

Pairing

For brand new earbuds, please fully charge them before pairing.
Manual Pairing

Take the earbuds out of the charging case. They will automatically enter the Bluetooth pairing mode.

Choose “Audio Vance SP301” to connect.
Automatic Pairing
Only when the earbuds were paired with a device before, from second time, wireless connections with that one will automatically establish when the earbuds are taken out of the case.

Re-Pairing

To exit from an unwanted AUTOMATIC PAIRING device, and start a new pairing with other device.

1. Please do Manual Power-Off for both earbuds simultaneously. (Ref. #4 of User Manual)
2. Keep both earbuds out of case and press their MFB simultaneously 55. When you see White/Red LED flash alternatively , Re-pairing is done.

Controls

Definition of abbreviation
X1, X2, X3: Tap Once/ Twice / Three times, and so on.
1”,2”,3”: Press and hold for 1 second / 2 seconds / 3 seconds, and so on.
L: Left earbud.
R: Right earbud.

Reset

You might need to reset the earbuds if they cannot pair with each other or with other devices.
For cannot pair with other devices

1. Delete“ Audio Vance SP301” from the Bluetooth list and turn off the Bluetooth of your phone. Keep the earbuds in ON status and outside of the charging case.
2. Triple tap L&R earbuds. White LED lights 3S.
3. Put the earbuds into the case for charging, and the Reset is done.

For cannot pair with each other

1. Delete “Audio Vance SP301” from the Bluetooth list and turn off the Bluetooth of your phone. Keep the earbuds in ON status and outside of the charging case.
2. Double tap L&R earbuds simultaneously. White LED rapidly flash.
3. Put the earbuds into the case for charging, and the Reset is done.

LED Light Guide

LED on Earbuds

flash every 3S.

LED on Charging Case

Specification

Specifications are subject to change without notice.

380 mAh (charging case)
Charging time| 2.0 hours
Playtime
(varies by volume and content)| 6.0 hours (Total 24 hours with
the charging case)
Driver size| 10 mm x 2
Frequency response| 20 Hz – 20 kHz
Impedance| 32 0±15%
Bluetooth version| V 5.2
Bluetooth range| >10 m / 33 ft

Tips

1. To be familiar with Touch Control of earbuds, please practice Quick-Twice-Tap just on Control Area in the beginning.

2. If the earbuds can’ t be found on your phone but you can hear CONNECTED tone, please check whether they are pairing with other device automatically because they had been paired before. Do Re-Pairing can solve this problem.

3. If the earbuds do not function as expected, please try following steps to solve the issue.
   •  Place the earbuds into the charging case and charge the earbuds. or
   • Restart the device connected to the earbuds. or
   •  Reset the earbuds.

4. Please fully charge the earbuds prior to first-time use.

5. Please recharge the earbuds if they have been unused for over two months.

Warning

1. Never disassemble or modify your earbuds for any reasons to avoid any damages and danger.
2. Do not store the earbuds in extreme high/low temperatures (such as under 0°C, or over 45°C).
3. Avoid using the indicator close to the eyes of children or animals.
4. Do not use the earbuds during a thunderstorm to avoid dysfunction and risk of electric shock.
5. Do not use harsh chemicals or strong detergents to clean the earbuds.

Note: please do not use earbuds for a long time as may damage your hearing.

EU501 Earbuds
User Manual

Please read manual carefully before using earbuds Please keep this manual for future references
What’s in the box

Customize your fit and wearing

• Choose the Ear Tips for a perfect fit and audio performance.
• M-size Ear Tips are pre-installed, which fit most people.
• Insert the earbuds into the inner canal of your ears, Turn gently until you find the most comfortable and secure position.

Charging

•  For brand new earbud, remove the insulating sheet covered on metal pins of earbuds.
• After using, please fully dry off earbuds and charging port before charging to avoid short-circuit damage.
• Use a certified USB-C charging cable and power supply to prevent any damage.

1. Charging Earbuds
   ▲ Place the earbuds into the case and close the case.

2. Charging the Case

Power On/Off
Power On/Off Automatically ace the earbuds out of the charging case to power on.
Place the earbuds into the charging case to power off.

Manual Power On/Off
Press 2s for Power On and 5s for Power Off when the earbuds are not connected with any device.

Pairing
For brand new earbuds, please fully charge them before pairing.
Manual Pairing

Take the earbuds out of the charging case. They will automatically enter the Bluetooth pairing mode.

Choose “Audio Vance EU501” to connect.
Automatic Pairing
Only when the earbuds paired with a device before, from second time, wireless connections with that one will automatically establish when you take the earbuds out of the case.
Re-Pairing
To exit from an unwanted AUTOMATIC PAIRING device, and start a pairing with new device.

• Place the earbuds into the charging case and let the case open.
• Press and hold the button on the case for 2 seconds until the LED on one earbud flash Red-to-White alternatively, and 3 LED on the charging case flash twice.

Controls & ANC

Definition of abbreviation
X1, X2, X3: Tap Once / Twice / Three times, and so on.
17,2”,3”: Press and hold for 1 second / 2 seconds / 3 seconds, and so on.
L: Left earbud.
R: Right earbud.
ANC: Active Noise Cancelling
Reset
You might need to reset the earbuds if they cannot pair with each other or with other devices.

1. Delete “Audio Vance EU501” from the Bluetooth list and turn off the Bluetooth of your phone.
2. Place the earbuds into the charging case and make sure they are being charged.
3. Keep the charging case open, then press and hold the button on the bottom of the charging case for 10 seconds until the LED of earbuds flash white & red 3 times, and 3 LED on the charging case flash twice.

LED Light Guide

LED on Earbuds

Slave earbud white LED flash every 5S.

LED on Charging Case

Specification
Specifications are subject to change without notice.

Playtime
(varies by volume and content)| 6.0 hours (Total 24 hours with the charging case)
Driver size| 10 mm x 2
Frequency response| 20 Hz – 20 kHz
Impedance| 32 0±15%
Bluetooth version| V 5.2
Bluetooth range| >10 m / 33 ft

Tips

1. To be familiar with Touch Control of earbuds, please practice Quick-Twice-Tap just on Control Area in the beginning.

2. If the earbuds can’ t be found on your phone but you can hear CONNECTED tone, please check whether they are pairing with other device automatically because they had been paired before. Do Re-Pairing can solve this problem.

3. If the earbuds do not function as expected, please try following steps to solve the issue.
   •  Place the earbuds into the charging case and charge the earbuds. or
   •   Restart the device connected to the earbuds. or
   •   Reset the earbuds.

4. Please fully charge the earbuds prior to first-time use.

5. Please recharge the earbuds if they have been unused for over two months.

Warning

1. Never disassemble or modify your earbuds for any reasons to avoid any damages and danger.
2. Do not store the earbuds in extreme high/low temperatures (such as under 0°C, or over 45°C).
3. Avoid using the indicator close to the eyes of children or animals.
4. Do not use the earbuds during a thunderstorm to avoid dysfunction and risk of electric shock.
5. Do not use harsh chemicals or strong detergents to clean the earbuds.

Note: please do not use earbuds for a long time as may damage your hearing.

Customer Service
18-month limited warranty
Lifetime technical support
Our warranty is additional to the legal rights consumers have buying this product.
service-us@audiovance.com
(For USA and Canada Only)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>