Audiovance SP301 2-Set Wireless Headphones Bluetooth Earbuds User Manual

June 16, 2024
Audiovance

**Audiovance SP301 2-Set Wireless Headphones Bluetooth Earbuds User Manual

**

What’s in the box

  • SP301 Earbuds x 2

  • Charging Case x 1

  • Ear Tips +L/M/Sx 3

  • Charging Cable 1

  • User Manual x 1

Customize your fit and wearing

  • Choose the Ear Tips for a perfect fit and audio performance.
  • M-size Ear Tips are pre-installed, which fit most people.
  • Insert the earbuds into the inner canal of your ears. Turn gently until you find the most comfortable and secure position.

Charging

  • For brand new earbuds, remove the insulating sheet covered on metal pins of earbuds.
  • After using, please fully dry off earbuds and charging port before charging to avoid short-circuit damage.
  • Use a certified USB-C charging cable and power supply to prevent any damage.

Charging Earbuds

  • Place the earbuds into the case and close the case.

Charging the Case

  • Charging

  • Fully charged

Power On/Off

Power On Automatically
Open the charging case, the earbuds will turn on

Power Off Automatically
Place the earbuds into charging case and close it, the earbuds will turn off.

Manual Power On/Off
When the earbuds are outside of case, press 2s for Power On, 5s for Power Off

Pairing

For brand new earbuds, please fully charge them before pairing. Manual Pairing

  1. Take the earbuds out of the charging case. They will automat automatically enter the Bluetooth pairing mode.

  2. Choose “Audio Vance SP301” to connect.

Automatic Pairing
Only when the earbuds were paired with a device before, from second time, wirelessonnections with that one will automatically establish when the earbuds aer taken out of the case.

Re-Pairing

To exit from an unwanted AUTOMATIC PAIRING device, and start a new pairing with other device.

  1. Please do Manual Power-Offord both earbuds simultaneously. (Ref. #4 of User Manual)

  2. Keep both earbuds out of case and press their MFB simultaneously 55. When you see White/Red LED flash alternatively , Re-pairing is done.

Controls  **

**

Definition of abbreviation

X1, X2, X3: Tap Once / Twice / Three times, and so on.
1”,2”,3”: Press and hold for 1 second / 2 seconds / 3 seconds, and so on.
L: Left earbud.
R: Right earbud.

Reset

You might need to reset the earbuds if they cannot pair with each other or with other devices.

For cannot pair with other devices

  1. Delete“ Audio Vance SP301” from the Bluetooth list and turn off the Bluetooth of your phone. Keep the earbuds in ON status and outside of the charging case.

  2. Triple tap L&R earbuds. White LED lights 3S.

  3. Put the earbuds into the case for charging, and the Reset is done.

For cannot pair with each other

  1. Delete“Audiovance SP301” from the Bluetooth list and turn off the Bluetooth of your phone. Keep the earbuds in ON status and outside of the charging case.

  2. Double tap L&R earbuds simultaneously. White LED rapidly flash.

  3. Put the earbuds into the case for charging, and the Reset is done.

LED Light Guide

**LED on Earbuds

**

Meaning LED Status
Turn on White LED lights 1S
Turn off Red LED lights 15
Paring Master earbud white/red LED flash alternately. Slave earbud white LED

flash every 3S.

**LED on Charging Case

**

Meaning LED Status
Charging Red LED blink
Fully charged Red LED keeps on
Low battery alarm 1Hz quick flash 4s then power off

Specification

Input 5 V-380 mA
Output 5 V-100 mA
Battery capacity 50 mash x 2 (earbuds); 500 mash (charging case)
Charging time 2 hours
Playtime(varies by volume and content) 6 hours (Total 24 hours with the

charging case)
Driver size| 13 mmx 2
Frequency response| 20 Hz – 20 kHz
Impedance| 32 0±5%
Bluetooth version| V 5.2
Bluetooth range| >10 m / 33 ft

Tips

  1. To be familiar with Touch Control of earbuds, please practice Quick-Twice-Tap just on Control Area in the beginning.
  2. Ifthe earbuds can’ t be found on your phone but you can hear CONNECTED tone, please check whether they are pairing with other device automatically because they had been paired before.
  3. If the earbuds do not function as expected, please try following steps to solve the issue.
    • Place the earbuds into the charging case and charge the earbuds. or
    • Restart the device connected to the earbuds. or
    • Restart the device connected to the earbuds. or
    • Reset the earbuds.
  4. Please fully charge the earbuds prior to first-time use.
  5. Please recharge the earbuds if they have been unused for over two months.

Warning

  1. Never disassemble or modify your earbuds for any reasons to avoid any damages and danger.
  2. Do not store the earbuds in extreme high/low temperatures (such as under 0°C, or over 45°C).
  3. Avoid using the indicator close to the eyes of children or animals.
  4. Do not use the earbuds during a thunderstorm to avoid dysfunction and risk of electric shock.
  5. Do not use harsh chemicals or strong detergents to clean the earbuds.

Note : please do not use earbuds for a long time as may damage your hearing.

Customer Service
18-month limited warranty
Lifetime technical support
Our warranty is additional to the legal rights consumers have buying this product.

service-us@audiovance.com (For USA and Canada Only)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals