Audiovance SP301 Wireless Earbuds Bluetooth Headphones User Manual
- June 13, 2024
- Audiovance
Table of Contents
Audiovance SP301 Wireless Earbuds Bluetooth Headphones
Please read the manual carefully before using earbuds Please keep this manual for future reference.
What’s in the box
Customize your fit and wearing
- Choose the Ear Tips for a perfect fit and audio performance.
- M-size Ear Tips are pre-installed, which fit most people.
- Insert the earbuds into the inner canal of your ears. Turn gently until you find the most comfortable and secure position.
Charging
- For brand-new earbuds, remove the insulating sheet covered on the metal pins of the earbuds.
- After using, please fully dry off the earbuds and charging port before charging to avoid short-circuit damage.
- Use a certified USB-C charging cable and power supply to prevent any damage.
Charging Earbuds
Place the earbuds into the case and close the case.
Charging the Case
Power On/Off
Power On Automatically
Open the charging case, the earbuds will turn on
Power Off Automatically
Place the earbuds into the charging case and close it, the earbuds will turn
off.
Manual Power On/Off
When the earbuds are outside of the case, press 2s for Power On, Ss for Power
Off
Pairing
For brand-new earbuds, please fully charge them before pairing.
Manual Pairing
- Take the earbuds out of the charging case. They will automatically enter the Bluetooth pairing mode.
- Choose “AudioVance SP301” to connect.
Automatic Pairing
Only when the earbuds were paired with a device before, from the second time,
wireless connections with that one will automatically establish when the
earbuds are taken out of the case.
Re-Pairing
To exit from an unwanted AUTOMATIC PAIRING device, and start a new pairing with another device.
- Please do Manual Power-Off for both earbuds simultaneously. (Ref. #4 of User Manual)
- Keep both earbuds out of the case and press their MFB simultaneously 5S. When you see a White/Red LED flash alternatively, Re-pairing is done.
Controls
- Definition of abbreviation
- Xl, X2, X3: Tap Once/ Twice/ Three times, and so on.
- 1″, 2″, 3″: Press and hold for 1 second/ 2 seconds/ 3 seconds, and so on.
- L: Left earbud.
- R: Right earbud.
Reset
You might need to reset the earbuds if they cannot pair with each other or with other devices.
For cannot pair with other devices
- Delete” Audiovance SP301″ from the Bluetooth list and turn off the Bluetooth of your phone. Keep the earbuds in ON status and outside of the charging case.
- Triple tap L&R earbuds. White LED lights 3S.
- Put the earbuds into the case for charging, and the Reset is done.
For cannot pair with each other
- Delete” Audiovance SP301″ from the Bluetooth list and turn off the Bluetooth of your phone. Keep the earbuds in ON status and outside of the charging case.
- Double tap L&R earbuds simultaneously. White LED rapidly flashes.
- Put the earbuds into the case for charging, and the Reset is done.
LED Light Guide
LED on Earbuds
| Meaning | LED Status |
|---|---|
| Turn on | White LED lights 1S |
| Turn off | Red LED lights 1S |
| Paring | Master earbud white/red LED flash alternately. Slave earbud white LED |
flash every 3S.
LED on Charging Case
| Meaning | LED Status |
|---|---|
| Charging | Red LED blink |
| Fully charged | The red LED keeps on |
| Low battery alarm | IHz quick flash 4s then power off |
Specification
| Input | 5 V=380 mA |
|---|---|
| Output | 5 V=l00 mA |
| Battery capacity | 50 mAh x 2 (earbuds); 500 mAh (charging case) |
| Charging time | 2 hours |
Playtime
(varies by volume and content)| 6 hours (Total 24 hours with the charging
case)
Driver size| 13 mm x 2
Frequency response| 20 Hz – 20 kHz
Impedance| 320+5%
Bluetooth version| V 5.2
Bluetooth range| >10 m/33 ft
Tips
- To be familiar with the Touch Control of earbuds, please practice Quick-Twice-Tap just on the Control Area in the beginning.
- If the earbuds can’t be found on your phone but you can hear the CONNECTED tone, please check whether they are pairing with another device automatically because they had been paired before.
- If the earbuds do not function as expected, please try the following steps to solve the issue.
- Place the earbuds into the charging case and charge the earbuds. or
- Restart the device connected to the earbuds. or
- Restart the device connected to the earbuds. or
- Reset the earbuds.
- Please fully charge the earbuds prior to first-time use.
- Please recharge the earbuds if they have been unused for over two months.
Warning
- Never disassemble or modify your earbuds for any reason to avoid any damage and danger.
- Do not store the earbuds in extreme high/low temperatures (such as under 0°C, or over 45°C).
- Avoid using the indicator close to the eyes of children or animals.
- Do not use the earbuds during a thunderstorm to avoid dysfunction and risk of electric shock.
- Do not use harsh chemicals or strong detergents to clean the earbuds.
Note:
Please do not use earbuds for a long time as may damage your hearing.
Customer Service
18-month limited warranty
Lifetime technical support
Our warranty is additional to the legal rights consumers have buying this
product.
service-us@audiovance.com
(For USA and Canada Only).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>