Audiovance SPEU 301 Wireless Earbuds Bluetooth Headphones User Manual
- June 13, 2024
- Audiovance
Table of Contents
- Audiovance SPEU 301 Wireless Earbuds Bluetooth Headphones
- What’s in the box
- Customize your fit and wearing
- Charging
- Power On/Off
- Pairing
- Re-Pairing
- Controls
- Reset
- LED Light Guide
- Specification
- Tips
- What’s in the box
- Customize your fit and wearing
- Charging
- Power On/Off
- Pairing
- Controls
- Reset
- LED Light Guide
- Specification
- Tips
- Customer Service
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Audiovance SPEU 301 Wireless Earbuds Bluetooth Headphones
Please read manual carefully before using earbuds Please keep this manual for future references
What’s in the box
Customize your fit and wearing
- Choose the Ear Tips for a perfect fit and audio performance.
- M-size Ear Tips are pre-installed, which fit most people.
- Insert the earbuds into the inner canal of your ears. Turn gently until you find the most comfortable and secure position.
Charging
- For brand new earbuds, remove the insulating sheet covered on metal pins of earbuds.
- After using, please fully dry off earbuds and charging port before charging to avoid short-circuit damage.
- Use a certified USB-C charging cable and power supply to prevent any damage.
Charging Earbuds
Charging the Case
Power On/Off
Power On Automatically
Open the charging case, the earbuds will turn on
Power Off Automatically
Place the earbuds into charging case and close it, the earbuds will turn off
.
Manual Power On/Off
When the earbuds are outside of case, press 2s for Power On, 5s for Power Off
Pairing
For brand new earbuds, please fully charge them before pairing.
Manual Pairing
- Take the earbuds out of the charging case. They will automatically enter the Bluetooth pairing mode.
- Choose “AudioVance SP301” to connect.
Automatic Pairing
Only when the earbuds were paired with a device before, from second time,
wireless connections with that one will automatically establish when the
earbuds aer taken out of the case.
Re-Pairing
To exit from an unwanted AUTOMATIC PAIRING device, and start a new pairing with other device.
- Please do Manual Power-Off for both earbuds simultaneously. (Ref. #4 of User Manual)
- Keep both earbuds out of case and press their MFB simultaneously 5S. When you see White/Red LED flash alternatively , Re-pairing is done.
Controls
Definition of abbreviation
- Xl, X2, X3: Tap Once/ Twice/ Three times, and so on.
- 1″, 2″, 3″: Press and hold for 1 second/ 2 seconds/ 3 seconds, and so on. L: Left earbud.
- R: Right earbud.
Reset
You might need to reset the earbuds if they cannot pair with each other or with other devices.
For cannot pair with other devices
- Delete” Audiovance SP301″ from the Bluetooth list and turn off the Bluetooth of your phone. Keep the earbuds in ON status and outside of the charging case.
- Triple tap L&R earbuds. White LED lights 3S.
- Put the earbuds into the case for charging, and the Reset is done.
For cannot pair with each other
- Delete” Audiovance SP301″ from the Bluetooth list and turn off the Bluetooth of your phone. Keep the earbuds in ON status and outside of the charging case.
- Double tap L&R earbuds simultaneously. White LED rapidly flash.
- Put the earbuds into the case for charging, and the Reset is done.
LED Light Guide
LED on Earbuds
| Meaning | LED Status |
|---|---|
| Turn on | White LED lights lS |
| Turn off | Red LED lights lS |
Paring
| Master earbud white/red LED flash alternately. Slave earbud white LED flash every 3S.
LED on Charging Case
| Meaning | LED Status |
|---|---|
| Charging | Red LED blink |
| Fully charged | Red LED keeps on |
| Low battery alarm | lHz quick flash 4s then power off |
Specification
| Input | 5 V=380 mA |
|---|---|
| Output | 5 V= l00 mA |
| Battery capacity | 50 mAh x 2 (earbuds); 500 mAh (charging case) |
| Charging time | 2 hours |
Playtime
(varies by volume and content)
| 6 hours (Total 24 hours with the charging case)
Driver size| 13 mm x2
Frequency response| 20 Hz – 20 kHz
Impedance| 320+5%
Bluetooth version| V5.2
Bluetooth range| >10 m / 33 ft
Tips
- To be familiar with Touch Control of earbuds, please practice Quick-Twice-Tap just on Control Area in the beginning.
- If the earbuds can’t be found on your phone but you can hear CONNECTED tone, please check whether they are pairing with other device automatically because they had been paired before.
- If the earbuds do not function as expected, please try following steps to solve the issue.
- Place the earbuds into the charging case and charge the earbuds. or
- Restart the device connected to the earbuds. or
- Restart the device connected to the earbuds. or
- Reset the earbuds.
- Please fully charge the earbuds prior to first-time use.
- Please recharge the earbuds if they have been unused for over two months.
Warning
- Never disassemble or modify your earbuds for any reasons to avoid any damages and danger.
- Do not store the earbuds in extreme high/low temperatures (such as under 0°C, or over 45°C).
- Avoid using the indicator close to the eyes of children or animals.
- Do not use the earbuds during a thunderstorm to avoid dysfunction and risk of electric shock.
- Do not use harsh chemicals or strong detergents to clean the earbuds.
Note: please do not use earbuds for a long time as may damage your hearing.
Customer Service
18-month limited warranty Lifetime technical support Our warranty is additional to the legal rights consumers have buying this product.
- service-us@audiovance.com
- (For USA and Canada Only)
Please read manual carefully before using earbuds Please keep this manual for future references
What’s in the box
Customize your fit and wearing
- Choose the Ear Tips for a perfect fit and audio performance.
- M-size Ear Tips are pre-installed, which fit most people.
- Insert the earbuds into the inner canal of your ears,Turn gently until you find the most comfortable and secure position.
Charging
- For brand new earbuds, remove the insulating sheet covered on metal pins of earbuds.
- After using, please fully dry off earbuds and charging port before charging to avoid short-circuit damage.
- Use a certified USB-C charging cable and power supply to prevent any damage.
Charging Earbuds
Charging the Case
Power On/Off
Power On Automatically
Take the earbuds out of the charging case to power on.
Power Off Automatically
Place the earbuds into the charging case to power off.
Manual Power On/Off
When the earbuds are outside of case, press 2s for Power On, 5s for Power Off
.
Pairing
For brand new earbuds, please fully charge them before pairing.
Manual Pairing
- Take the earbuds out of the charging case. They will automatically enter the Bluetooth pairing mode.
- Choose “AudioVance EU301” to connect.
Automatic Pairing
Only when the earbuds paired with a device before, from second time, wireless
connections with that one will automatically establish when you take the
earbuds out of the case.
Controls
Definition of abbreviation
- Xl, X2, X3: Tap Once/ Twice/ Three times, and so on.
- 1″, 2″, 3″: Press and hold for 1 second/ 2 seconds/ 3 seconds, and so on. L: Left earbud.
- R: Right earbud.
Reset
You might need to reset the earbuds if they cannot pair with each other or with other devices.
- Delete “Audiovance EU301” from the Bluetooth list and turn off the Bluetooth of your phone.
- Take the earbuds out of the charging case and make sure they are not connected with your phones.
- Tap control area of both earbuds 5 times, you’ ll see blue/white LED flash 3 times. Then, reset is done.
LED Light Guide
LED on Earbuds
LED on Charging Case
Specification
Specifications are subject to change without notice.
| Input | 5 V=300 mA |
|---|---|
| Output | 5 V=80 mA |
| Battery capacity | 40 mAh x 2 (earbuds); 480 mAh (charging case) |
| Charging time | 2.0 hours |
Playtime
(varies by volume and content)
| 5.5 hours (Total 25 hours with the charging case)
Driver size| 10 mm x 2
Frequency response| 20 Hz – 20 kHz
Impedance| 320+15%
Bluetooth version| V 5.2
Bluetooth range| >10 m / 33 ft
Tips
- To be familiar with Touch Control of earbuds, please practice Quick-Twice-Tap just on Control Area in the beginning.
- If the earbuds can’t be found on your phone but you can hear CONNECTED tone, please check whether they are pairing with other device automatically because they had been paired before. Please disconnect it from that device.
- If the earbuds do not function as expected, please try following steps to solve the issue.
- Place the earbuds into the charging case and charge the earbuds. or
- Restart the device connected to the earbuds. or
- Reset the earbuds.
- Please fully charge the earbuds prior to first-time use.
- Please recharge the earbuds if they have been unused for over two months.
Warning
- Never disassemble or modify your earbuds for any reasons to avoid any damages and danger.
- Do not store the earbuds in extreme high/low temperatures (such as under 0°C, or over 45°().
- Avoid using the indicator close to the eyes of children or animals.
- Do not use the earbuds during a thunderstorm to avoid dysfunction and risk of electric shock.
- Do not use harsh chemicals or strong detergents to clean the earbuds.
Note: please do not use earbuds for a long time as may damage your hearing.
Customer Service
18-month limited warranty Lifetime technical support Our warranty is additional to the legal rights consumers have buying this product. service- us@audiovance.com (For USA and Canada Only)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>