oneisall YP-7268 Professional Pet Clippers User Manual

YP-7268 Professional Pet Clippers
User Manual

YP-7268 Professional Pet Clippers

Charging use

1. Insert the USB charging cable into the charger, and then plug the USB charging cable into the power socket (the USB charging cable can be plugged into the socket with USB interface, desktop computer, notebook computer,mobile power supply, etc.)

lcd icon description:

1. fully charged: recharge icon on
2. in the charging :recharge icon flashing, display current power percentage;
3. in the discharge: display current speed &percent charge;
4. low battery: recharge icon flashing, display current power percentage
5. plug and play: display current speed, percent charge icon flashing

The clippers use rechargeable batteries. If the battery fails, it is not recommended to replace the battery by yourself, and you should contact customer service in time for help.

Fixed Length Function

Notice:

1. The size of the blade and the guide combs means the length of the hair that can be left on your dog after a grooming.

2. For example, if you use the blade with 1.0(mm) and the 12mm guide comb together, that it will leave 1.0mm + 12mm = 13mm long hair on your dog.

3. If you use the blade with 1.0 (mm) and don’t use a guide comb, that the hair will be shortened to 1.0mm only.

4. .Hence, the rest length of your dog’s hair is based on the blade size and the guard size. The shortest length will be 0.8mm (with the 0.8 blade only) and the longest length will be 13.8mm (with the 1.8 blade and 12mm guide comb).

5. Determine the need hair length

6. Select the appropriate guide comb

7. Fine tune the blade

Moving the button left and right to adjust the blade (0.8mm-1.8mm) guide comb installation:

1. Like the picture, hold both sides and push when butting the button positions. (Notes: the comb should not be loose or easy to fall off after being butted.)
2. guide comb dismantle: Remove the butted positions with hands on its both sides and then remove the comb

Blade Removal Installation

Blade Removal:

1. Adjust the adjusting ring to 0.8mm before remove the blade.
2. Like the picture, press down the moving blade with the thumb and then remove the blade.
3. Please hold with the other hand to avoid the blade falling off.

Blade Installation:

1. Adjust the adjusting ring to 1.8mm before installing the blade.
2. Direct the blade (B) at the hair clipper’s slot (A) and plug in.
3. Push the blade down until it clicks.

Cleaning & Maintenance

Taper Blade Cleaning:

1. Clear up the blade with cleaning brush.
2. The blade can be removed out for cleaning.
3. The moving blade can be turned back , and then cleaning the hair between the moving blade and the fixed blade.
4. The clipper body can also be cleaned with water.
5. After cleaning the clipper body, dry the body with a dry cloth.

Taper Blade Maintenance:
Before or after use, maintain the blade by dripping some oil on the red point places like the left picture .(oil included)

Specification

Charging time: 1.5 hours
Operating time with full charge: about 2 hours
Specific
Adapter| Input:110V – 240V 50/60Hz
Output: 5V 1000mA

Precautions For Use

1. Please do not disassemble the product.
2. The product can only be cleaned by cloth with little water or mild soap solution.
3.  Do not charge the product under an environment above 40 C or below 5 C ?The product can produce little heat during using or charging, which is normal. Please remove the battery safely and return it to the specified places when the battery runs out. Never discard it casually.

Q & A

Q1. Any suggestions before using the clipper?

A1. Firstly, you should wash and dry the pet. Secondly, if your pet's hair is too long, you should trim your pet's hair with scissors first, comb the hair smoothly, then use clippers to trim your pet. Thirdly, before and after using the clipper, a little oil should be dripped on the blade for lubrication and maintenance.

Q2. What does the guide comb 3mm, 6mm, 9mm, 12mm mean? How to use it?

A2. The size of the blade and the guide combs means the length of the hair that can be left on your dog after a grooming. For example, if you use the blade with 1.0(mm) and the 12mm guide comb together, that it will leave 1.0mm

• 12mm = 13mm long hair on your dog. If you use the blade with 1.0 (mm) and don't use a guide comb, that the hair will be shortened to 1.0mm only.

Q3. What should | do if the battery cannot be charged or turned on?

A3. The battery life depends on the frequency of use and the time of use. If it is not used for a long time, it is recommended to charge the hair clipper at least once every three months to ensure battery life.

Lifetime Replacement Guarantee
Thanks for your purchase. If you ever have any issues with the clipper, please contact us for a free replacement or refund.
We will get back to you within 24 hours.

Oneself Customer Support Email:
support@oneisall.com
Missing accessories or any other problems, please contact us:
support@oneisall.com
Made in china

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>