3M G5 Drive Thru Headset User Guide
- June 4, 2024
- 3M
Table of Contents
3M G5 Drive Thru Headset
Buttons
- Feather-touch buttons sense finger pad for a touch versus push
- Vibration confirms that the button has been pressed
NOTE: In a Single Lane operation, use Lane 1 or Lane 2 touch zones to answer the Order Point.
Light on Microphone Boom
- Green (Steady) Light: Lane 1 no car present, stand by
- Red/Green (Steady) Light: Lane 2 (Dual Lane) no car present, stand by
- Blue (Flashing) Light: Vehicle arrived, but not answered
- Blue (Steady) Light: Vehicle present and answered
- Red (Steady) Light: Talk (either lane or page)
Headset Charging Station and Batteries
Battery Removal
- Place pointer finger between Control Pod and battery; place thumb under the battery latch.
- Using a pinching motion, pinch and gently pull battery straight out.
Contact your 3M Representative Today
1-800-328-0033
3M.com/GS
3M
Commercial Solutions
3M Center Bldg 220·12E-04 St. Paul, MN 55144
Phone 1-800-328-0033 Web
3M.com/drivethru
© 3M 2016. All rights reserved.
3M is a trademark of 3M. Used under license in Canada.
Printed in the USA. Please recycle. 78-8134·0685-3 August 2016
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>