reolink Duo 2 PoE 4K PoE Security Camera System User Guide
- June 14, 2024
- reolink
Table of Contents
Duo 2 PoE 4K PoE Security Camera System
User Guide
Duo 2 PoE 4K PoE Security Camera System
Quick Start Guide
Apply to: Relink Duo 2 PoE / WiFi
June 2022
What’s in the Box
NOTE:
- The power adapter, antennas and 4.5m Power Extension Cable only come with WiFi Camera.
- Quantity of accessories varies with the camera model you purchase.
Camera Introduction
PoE Camera
NOTE: Actual camera appearance and components are subject to the model you purchased.
Connection Diagram
Before initial setup, follow the steps below to connect your camera.
- Connect the camera to a LAN port on your router with an Ethernet cable.
- Use the power adapter to power on the camera.
NOTE: The connection diagram takes the WiFi camera as an example and also apply to the PoE camera. For PoE Camera, please power the camera with a PoE Switch/Injector/ Relink PoE NVR or a DC 12V power adapter. (not included in the package)
Set up the Camera
Download and Launch the Relink App or Client software, and follow the onscreen instructions to finish initial setup.
On Smartphone
Scan to download the Reolink App.
https://reolink.com/wp-json/reo-v2/app/download
- On PC
Download path of the Reolink Client: Go to https://reolink.com > Support > App & Client.
NOTE:
- When setting up the WiFi camera, you need to follow the onscreen instructions to finish the WiFi configuration first.
- If you are connecting the PoE camera to a Reolink PoE NVR, please set up the camera via the NVR interface.
Mount the Camera
Installation Tips
- Do not face the camera towards any light sources.
- Do not point the camera towards a glass window. Or, it may result in poor image quality because of the window glare by infrared LEDs, ambient lights or status lights.
- Do not place the camera in a shaded area and point it towards a well-lit area. Or, it may result in poor image quality. To ensure best image quality, the lighting condition for both the camera and the capture object shall be the same.
- To ensure better image quality, it’s recommended to clean the lens with a soft cloth from time to time.
- Make sure the power ports are not directly exposed to water or moisture and not blocked by dirt or other elements.
- With IP waterproof ratings, the camera can work properly under conditions like rain and snow. However, it doesn’t mean the camera can work underwater.
- Do not install the camera at places where rain and snow can hit the lens directly.
- The camera may work in extreme cold conditions as low as -25°C. Because when it is powered on, the camera will produce heat. You may power on the camera indoors for a few minutes before installing it outdoors.
- Try to keep the left lens level with the right lens.
Mount the Camera to the Wall
The following installation methods take the WiFi camera as an example and also
apply to the PoE camera.
Drill holes in accordance with the mounting template, Secure the mounting
plate to the wall with the upper two screws and hang the camera on it. Then
lock the camera in position with the lower screw.
NOTE: Use the drywall anchors include in the package if needed.
To get the best field of view, loosen the adjustment screw on security mount
and turn the camera. 
Stiffen the adjustment screw to lock the camera.
Mount the Camera to Ceiling
Drill holes in accordance with the mounting template, Secure the mounting
plate to the wall with the upper two screws and hang the camera on it. Then
lock the camera in position with the lower screw.
To get the best field of view, loosen the adjustment screw on security mount
and turn the camera. 
Stiffen the adjustment screw to lock the camera.
Troubleshooting
Camera is not Powering on
If your camera is not powering on, please try the following solutions:
For PoE Camera
- Make sure your camera is powered on properly. The PoE camera should be powered by a PoE switch/injector, a Reolink NVR or a 12V power adapter.
- If the camera is connected to a PoE device as listed above, connect it to another PoE port and check again.
- Try again with another Ethernet cable.
For WiFi Camera
- Plug the camera into a different outlet and see if it works.
- Power on the camera with another working 12V 2A DC adapter and see if it works.
If these won’t work, contact Reolink Support.
Picture is not Clear
If the picture from the camera is not clear, please try the following
solutions:
- Check the camera lens for dirt, dust or spiderwebs, please clean the lens with a soft, clean cloth.
- Point the camera to a well-lit area, the lighting condition will affect the picture quality a lot.
- Upgrade the firmware of your camera to the latest version.
- Restore the camera to factory settings and check out again.
Specification
Hardware Features
Infrared Night Vision: Up to 30 meters
Spotlight: 6pcs/3.5W/6500K
Day/Night Mode: Auto switchover
Angle of View: Horizontal: 180°, vertical: 60°
General
Dimension: 195 x 103 x 56mm
Weight: 590g
Operating Temperature:
-10°C~+55°C (14°F~131°F)
Operating Humidity: 10% ~ 90%
For more specifications, visit https://reolink.com/.
Notification of Compliance
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: The following notes are only for WiFi camera. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television,
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Correct Disposal of This Product
This marking indicates that this product should not be disposed with other
household wastes. Throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was purchased.
They can take this product for environmentally safe recycling.
Limited Warranty
This product comes with a 2-year limited warranty that is valid only if
purchased from Reolink Official Store or a Reolink authorized reseller. Learn
more: https://reolink.com/warranty-and-return/.
NOTE: We hope that you enjoy the new purchase. But if you are not
satisfied with the product and plan to return, we strongly suggest that you
reset the camera to factory default settings before returning.
Terms and Privacy
Use of the product is subject to your agreement to the Terms of Service and
Privacy Policy at reolink.com. Keep out of reach of children.
End User License Agreement
By using the Product Software that is embedded on the Reolink product, you
agree to the terms of this End User License Agreement (“EULA”) between you and
Reolink. Learn more: https://reolink.com/eula/.
IC ISED Radiation Exposure Statement (For WiFi Version)
The WiFi camera complies with RSS-102 radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
OPERATING FREQUENCY (For WiFi Version) (the maximum transmitted power)
2412MHz — 2472MHz (19dBm)
5150MHz — 5350MHz (18dBm)
5470MHz — 5725MHz (18dBm)
Technical Support
If you need any technical help, please visit our official support site and
contact our support team before returning the products,
https://support.reolink.com.
58.03.001.0270
@Reolink Tech https://reolink.com
References
- Reolink Official: Security Cameras and Systems for Home & Business
- Reolink Official: Security Cameras and Systems for Home & Business
- Warranty & Return – Reolink
- Reolink Support - Official Reolink Help Center