oneisall BM3 Pet Grooming Vacuum Instruction Manual

June 14, 2024
Oneisall

oneisall BM3 Pet Grooming Vacuum Instruction Manual
oneisall BM3 Pet Grooming Vacuum

Safety Warnings and Use Precautions

  • This product is intended for home grooming only, not for commercial or industrial use, nor for use outdoors or in humid places.
  • Supervise use for children and people with physical and mental disabilities.
  • Please use the machine in a safe environment and under the instruction. Supervi- sion of a person who understands the safe use method and dangers of the product. In the absence of such a person, never let a child use it.
  • Please pay attention when using it near children and pets. In addition, please do not let children and pets play with this product.
  • Please do not touch the power plug and the product with wet hands.
  • Do not use this product if the power cord or power plug is damaged.
  • If you find the product can not work or damage or immersion in liquid, contact us. Please do not disassemble the product; the wrong assembly method may cause electric shock or fire; please contact our company if maintenance is needed.
  • Please do not inhale flammable or combustible liquids such as gasoline. in addition, please do not use the machine in or near an environment with flammable or combustible gases.
  • Do not pull the power cord, do not put heavy objects on top of the machine, and do not pinch the cord.
  • Do not use it while smoking or working with other high-temperature items (match- es, hot ash, etc.).
  • Ensure that the opening is not blocked before use.
  • Please unplug the power cord when you need to conduct maintenance.
  • Please do not use or keep it outdoors or in other wet places.
  • Please do not use products with fragrance as the fragrance may contain flamma- ble chemicals.
  • Please only use this product under the specified voltage, which can be found at the bottom of the machine.

Use Precautions

DO NOT operate with wet hands or unplug the power cord to avoid electric shock.

DO NOT smoke or use other flammable material.

Please do not use the machine in or near an environment with flammable or combustible gases.

There may be a strange smell during the first use; however, it will not cause adverse effects on the body and will disappear after a while. If the scorching smell persists, stop using it immediately!

Please keep the dust cup and filter clean.

If the dust cup and filter are used while dirty, they may cause product issue.

During maintenance, turn off the power supply and unplug the power cord before proceeding.

If the power is turned on for maintenance, it will cause electric shock, unexpected accidents, or injury.

The product will stop working when the temperature rises abnormally. In case of abnormal heating of the motor, stop using it immediately.

If the suction opening is blocked, please stop using it immediately. Take out the dust cup and clean the inlet and filter, then open it again after 60 minutes.

Please be sure to install and use the filter.

If you remove the filter, it will damage the motor

Package List

  • Main Vacuum Machine x1

  • Hose x 1

  • (3-6-9-12-18-24mm)Guide combs x 6
    Package List

  • Pet Hair Remover Roller

  • Slicker Brush

  • DE shedding Brush

  • Pet Clippers

  • Long Narrow Nozzle

  • Storage bag

  • USB charging cord for clippers

  • Brush x 1

Product Overview

Product Overview
Product Overview

How to Do if My Pets Get Nervous?

If your pet is nervous about the noise or the air flow, you may need to let him get used to the machine at first.

  1. Let your pet hear the sound of the machine or feel the slower air flow.
    My Pets Get Nervous

  2. Treat your pet with snack.
    My Pets Get Nervous

  3. Start to use the vacuum. If your pet still get nervous, try to repeat 1-2 to let him know that this machine would not do harm to him.
    My Pets Get Nervous

Get Started

Get Ready

  1. Put the dust cup gently in the direction of the arrow.
    Installation

  2. Connect the Accessory to the Vacuum Cleaner Through the Hose?
    Installation
    When using accessories, please pay attention to the edges of the accessories to avoid scratching your hands

  3. Connect the power supply.

  4. Press the on/off button
    Installation

  5. Select speed
    Connection

  6. Shutdown Memory Gear.
    Connection
    NOTE
    Press the power button to shut down during operation, and the next time it is turned on, it will default to the gear before shutting down.
    For example: Press the power button to turn off the power at the second gear, then press the power button again,The machine is on and running in 2nd gear. After the power is cut off, the gear position will not be memorized. For example, after the 3rd gear is running, the machine will be turned off and the plug will be unplugged.
    At this time, turn on the power and then turn on the machine, the machine will start and run in 1st gear.

  7. Groom your pet.
    Get Nervous

  8. Clean the dust cup.

Tips for Accessories Option

Dashed ding brush

Curved comb teeth can fit the back and head well. Used to remove the pet’s long and unnecessary thick hair.
Get Nervous

NOTE

Please be careful with the soft parts of your pet and do not use excessive force to cause skin scratches.
Please pop up the PUSH button when you do not need to use it.

Slicker brush

A larger area of comb teeth is suitable for large dogs with thick fur, used to remove the loosen hair and the dander inside the coats. Making the hair more fluffy and healthy.
Get Nervous

Pet Clippers

  1. Used to trim the pet’s hair without leaving a mess as the hair will not fly around.
  2. While cutting, it suctions the cut hair!
    Get Nervous

Use with vacuum or the clippers alone.
Pet Clippers
Pet Clippers

NOTE Remember to pay attention to the cutting edge and position, and do not use excessive force as it causes skin irritation.

Install Guide Comb (used with electric clippers)

Choose the length guide comb according to the length of pet hair you want to leave.

The guide comb ((3mm/6mm/9mm/12mm/18mm/24mm)) is applicable for grooming different hair lengths.

The guide comb set is small; keep it stored properly when it is not in use.

  • 3mm(1/8″)

  • 6mm(1/4″)

  • 9mm(3/8″)

  • 12mm,(1/2″)

  • 18mm(3/4″)

  • 24mm (1″)

Long narrow nozzle

Used to clean carpet, sofa corners, car, cat tree and cat nest.
Long narrow nozzle

Pet hair remover roller

Effectively remove pet hair that stuck to clothing.
Pet hair remover roller

Use with vacuum or the hair remover alone.

**** NOTE
Roll the remover back and forth. Do Not roll it in one direction all the time.

Maintenance

Clean the dust cup

  1. Cut off the power.
    Put your finger on the tail of the dust cup. (Follow the arrows for directions)
    Installation

  2. Open the lid and pour out.
    Push the catch to open the dust cup and pour out the lint.
    Installation

  3. Placement of the dust cup
    Simply install the dust cup in the direction of the arrow.
    Installation

NOTE

  1. If the removed dust cup is cleaned with water or a wet cloth, be sure to install it after the dust cup is completely dry. Otherwise, it will damage the motor.
  2. Please take dust cup lightly. If it drops will damaged easily. If have any problems with the cup, please contact us on Amazon or contact us email: support@oneisall.com

Clean the blades of pet clippers

  1. Push the blades out by hands.

  2. Brush and wash the blades.

  3. Dry the blades with cloth and drop oil.

  4. Align the slot under the blades and press to install the blades.

NOTE Oil is not included in the package. Please order it by yourself.

Clean the Metal Screen and Filter Sponge in the Dust Cup

Step 1 : Remove the dust bin by pulling it diagonally upwards from the main unit.
Step 2: Snap open
Installation

Step 3: Open the bottom cover and clean the dust bin first to clean out the hairs inside.

Step 4: Remove the filter pads and filter screen by jacking outwards from inside the dust bin and clean the pads and filter screen, then put them back in their original position accordingly.
Installation

Filter pads

Filter screens

Note: Do not wash filter Pads and filter screen them with water

NOTE

  • The filter should be cleaned with cold water at least every other month.
  • Please follow the frequency of use and conditions, the maintenance period is also different, regularly confirm if it is dirty, clean it.
  • When cleaning, remember to disconnect the power supply and unplug the plug from the socket.
  • Be sure to install HEPA after drying.
  • No-yet-dry HEPA can cause electric shock and malfunction.

Cleaning the HEPA & Sponge Filter

Step 1: Remove the dust cup and remove the HEPA & sponge filter.
Sponge Filter

Step 2. Clean them with brush.

Note: Do not wash filter Pads and filter screen them with water.
Sponge Filter

Step 3. Place the HEPA & sponge filter back into the machine.
Sponge Filter

Troubleshooting

Problems Possible Causes Solutions
Plug not been inserted well Plug the charger again
Cannot beturned on Switch has not been turnedon right Please contact our

customersupport: support@oneisall.com
Weak suction| Hose is clogged| Clean the hose and joint
Dust cup is too full| Empty dust cup
Filter is dirty| Clean filter
The Pet Clippersheats up during use| Debris stay in the internalparts of the clippers| Please remove the blade.Wash and oil
The hose is broken| Accidental damage| Remove the hoses and store
Bitten by pets at home| them in the bag we provided.

  • If the above solutions do not solve the problem, please stop using the product, and contact our customer support: support@oneisall.com
Input voltage 120V-60Hz
Rated power 350W
Hose length 59 inch
Dust cup capacity 3L
Size of the main machine 12.8 x 8.7 x 5 inch
Power cord length 90.55 inch
Noise 60dB

Pet Clippers

Input voltage (Pet clippers) : DC 5V 1A
Rated power: 5W
Charging time: About 3h
Working time: About 2h
Battery capacity: 1400mAh

Contact Us

WE ARE READY TO HELP

Oneself offers a standard 2-year warranty. If you have any issues with your Oneself product, please do not hesitate to contact us. Be sure to include your proof of purchase, model number, and any relevant photos or videos in your message to expedite the process. Our Oneself support team is available 7 days a week and will respond to your inquiry within 24 hours. Thank you for choosing Oneself.

Please note that the Oneisall warranty does not apply to used products or purchases made from unauthorized sellers. It’s important to be aware that the warranty also does not cover consumable parts such as blades, guards, filters, brushes, and similar items. These parts may require regular replacement or maintenance.

support@oneisall.com
+1 877-522-8578 (US) Mon-Fri 8am- 5pm(PST)
www.oneisall.com

APPS Icon
@Oneisall Official

Any problems you have, please contact us: support@oneisall.com

oneself Official Community
QR Code

oneself support
QR Code

Tutorial Video
QR Code

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals