BORMANN BVC3100 Vacuum Cleaner User Manual

BORMANN BVC3100 Vacuum Cleaner

Safety Instructions

• Please be sure to carefully read the manual first before using the product.
• Please be sure to keep the manual properly so that you could check anytime in future.
• Please correctly use it on the basis of fully understanding its contents.

1. This product is an electrical product. Please pay attention to electric shock hazard.

2. If the power wire is damaged or there exist other obvious damage, please stop using the product. Please don’t dismantle the product cap by yourself.
   Instead, it is necessary to ask the professional maintenance personnel to repair. The battery set is not allowed to open. Only the professionals could conduct
   such operation.

3. The damp-proofing measures should be taken for the product and charger in order to prevent electric shock.

4. Please don’t use the device for vaccuming in the burning ash, cigarette end and match or the apex-head materials, glass cullet, water or other kinds of liquid.
   Because the act may damage the vacuum cleaner and possibly endanger personal security. The burning ash and cigarette end, etc. may make the internal
   filter layer and some parts ablaze. Damp may lead to short circuit. The sharp object may damage the filter layer.

5. Please make sure that children are away from the packaging materials in order to prevent the asphyxiation hazard.

6. Please use the charger provided or other chargers with the same technical parameters, otherwise the hazards may be caused.

7. The charger should be disconnected when the product is in use.

8. If there exist obvious damage in product itself or charger and power wire, or the product is thrown away, please don’t use the product.

9. Please don’t expose vacuum cleaner in extreme weather conditions (For example, in the rain). When cleaning vacuum cleaner or conduct any maintenance
   (For example, replacing filter screen), one should turn off the power or pull out the attaching plug in vacuum cleaner socket.

10. Please be careful when you store the power wire of charger. Avoiding any damage of power wire. If it is damaged in any way, please replace as soon as
    possible.

11. Please make children away from the electrical product during using as the children cannot recognize the danger.

12. Although there is the filter screen, the product may still discharge a small amount of dust. If it is inhaled into mouth cavity by young children, anaphylaxis
    would be caused. If possible, please make children away from the product during using.

13. Please don’t sit or stand on the vacuum cleaner.

14. Ensuring that the vacuum cleaner is used under the circumstance that the filter screen and dust-storage chamber are placed correctly. It is necessary to
    ensure that the filter screen would not be damaged. Please don’t place any articles at the air outlet of the product.

15. Please don’t put the product near heat source or oven.

16. If the product is delivered to the third party for using, please make sure that the manual is attached.

Description of main parts

1. ON/OFF switch
2. Filter cover – Outlet filter
3. Hook for floor brush
4. Carrying handle
5. Cable-winding key
6. Vacuum power regulator
7. Dust bag filling display
8. Handle for opening the dust
9. Dust bag compartment (front cover)
10. Hose connector

Technical Data

Technical Data

Power:| 700w
Energy efficiency class:| A+
Dust collection capacity:| 4L
Filter Type:| Metal HEPA
Dust extraction class (carpet):| A
Dust extraction class (floor):| A
Filtration class:| A
Weight:| 4.7kg

• The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products.

• The parts described/illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in
  the product you just acquired.

• Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.

• To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.

Prior to operation

• Insert the connection head of the suction hose into the hose connector (10) until it locks in place. To do so, please press the buttons simultaneously. In
  order to release the hose again, please press the buttons once more on the connection head. Keep the buttons pressed down and then pull out the hose.

• Please attach the telescopic suction tube to the grip end.

• Then assemble the floor nozzle and/or the accessories.

Operating Instructions

Using the device

1. Unwind the length of cable you require.
2. Insert the mains plug into a correct socket. Turn on the device with the on/off switch (1) by pushing it downwards.
3. Adjust the suction power by turning the suction power regulator (6).
4. Vacuum at a steady speed. There is no need to exert pressure.
5. Attention: pay attention to the range that can be covered with the cable length.

Vacuum power regulator

• Low vacuum power: For curtains and delicate fabrics
• Medium vacuum power: For long-pile carpets and textile flooring
• High vacuum power: For sturdy rugs and floors

Telescopic Suction Tube

1. This makes it possible to adapt the height to your individual body size. Unlock the coupling by turning the wide section of the suction tube to the left.
2. Move the suction tube as required. To lock the coupling, turn the wide suction tube to the right.

Cable winding device
Pull out the cable up to the maximum length indicated with the yellow mark.
Never pull the cable out up to the red mark as the cable winding can be damaged.
Said damages are not covered by the warranty.

Winding
Press the cable (5) winding button and guide the cable. Hold the cable to avoid wrapping.

Nozzle Attachment (not included with all models)
Crevice nozzle / Brush nozzle: For vacuuming upholstery, curtains and in corners and crevices etc.
“2-in-1” nozzle: When this is folded together it can be used as a groove nozzle. If you would like to use the brush nozzle, pull the brush section in the direction
of the arrow until it locks in place.
Floor nozzle: To clean carpets or smooth surfaces.
Smooth floors: Press down the lever with the brush symbol with your foot. The brush is now visible.
Carpets: Press down the opposite lever.
Releasing the nozzles: Pull these off while turning slightly.

Air Slide
Open the air slide on the hose handle in order to regulate the airflow or to clear any articles sticking to the nozzle.

Dust bag replacement display (7)
Hold the hose up into air. If the dust bag change display lights up, the bag is full. Please change it.

Changing the dust bag

• Pull the plug out of the socket.
• Open the lid of the dust bag compartment by the handle (8) (until its locks in place).
• Remove the bag by pulling the fixing device carefully towards the rear in order to make the bag more easily accessible. Then remove the dust bag by pulling it upwards.
• Insert a new bag. Please ensure that the bag is located correctly in the guide.

Motor protection filter (inlet filter)
The inlet filter is located in the dust bag compartment. The filter is located vertically in the rear section of the dust housing. Remove the filter by pulling upwards. Clean the engine protection filter after dust bag changes. If necessary, the filter can also be washed in warm water without any additives. Place it back into place only once it is completely dry!

Outlet filter
The appliance is also equipped with an outlet filter. This filter is to be found on the side of your device behind the ventilation grille.
Open the ventilation grille by turning the filter cover
Then pull the grille out towards the front. Remove the filter and clean as described above. Please reinsert the filter correctly and then close the ventilation grille.

Cleaning and storage

Cleaning

• Pull the plug out of the socket before cleaning!
• Clean the casing with a dry cloth.

Storage

• Let the iron cool down completely.
• Wind the cable completely.
• Position the device either horizontally or vertically in order to suspend the hook on the floor nozzle in the parking assistance on the rear or the bottom of
  the device.

WWW.BORMANNTOOLS.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>