GYMAX OP70305 Garden Rocking Chair in Solid Wood Instructions
- June 14, 2024
- GYMAX
Table of Contents
GYMAX OP70305 Garden Rocking Chair in Solid Wood
Before You Start
Read each step
carefully before starting. It is very important to ensure each step followed
in correct order, otherwise assembly difficulties may occur.
Most of board parts
are labeled or stamped on the raw edges. Have a check to make sure all parts
are included.
Work in a spacious
area, preferably on a carpet close to where the unit will be used.
Keep the hand tools
close at hand. Do not use power tools to assemble your furniture. They may
scratch or damage the parts.
Product Description
Part List
-
x1 pc
Left Leg (No block support)
-
x1 pc
Right Leg with block support
-
x2 pcs
Base
-
x1 pc
CrossBar
-
x1 pc
Backrest
-
x1 pc
Seat
-
x1 pc
Support Piece
-
M7x70mm Screw
(A) x14pcs
-
M4x30mm Screw
(B) x2pcs -
M4 Allen key
(C) x2pcs
Assembly Instructions
STEP 1:
STEP 2:
STEP 3:
STEP 4:
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary.
Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish.
Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing. Check bolts/screws periodically and tighten them if necessary.
Further advice about wood furniture care
Please protect your outdoor furniture with a cover when not in use since long- term sunlight exposure will result in the damage on the surface. In addition to sunlight damage, wood and metal frame suffers when exposed to extremes in temperature and humidity. Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will enhance your furniture as it ages.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>