opis technology CLK-1 LED Clock OPIS User Manual
- June 21, 2024
- opis technology
Table of Contents
opis technology CLK-1 LED Clock OPIS
Product Information
Specifications
- Model: OPIS CLK-1
- Functions: Time / Alarm / Timer / Countdown
- Display: LED
- Power Source: Backup battery (1-week lifespan without power supply) and connection cable
Product Usage Instructions
Getting Started
- Insert the backup battery into the compartment located on the back of the clock.
- Connect the connection cable to the clock and the power supply.
- Plug the power supply into a socket.
Setting the Time
- Select 12-hour or 24-hour mode.
- Set the hour using the respective buttons.
- Set the minute using the corresponding controls.
- Adjust the year, month, and day as needed.
Adjusting Display Brightness
- You can set the brightness to automatic mode or choose a specific level from 1 to 10.
Setting the Alarm Clock
- Set Alarm 1 by specifying the hour and minute.
- Configure Alarm 2 with the desired time.
- You can toggle alarms on/off as needed.
Using the Timer
- To switch to Timer mode, follow the instructions provided on the device.
Using the Countdown
To switch to Countdown mode, follow the instructions on the clock.
- You can turn the display on or off based on your preference.
- Use the numeric keys for input or follow remote control instructions for specific functions.
- To save settings or initiate specific actions, refer to the corresponding buttons on the device or remote control.
- The flashing colons can be disabled by setting brightness to level L-01.
FAQ
- Q: How long does the backup battery last?
- A: The backup battery lasts approximately 1 week if no power supply is connected.
- Q: How can I disable the flashing colons on the display?
- A: You can turn off the flashing colons by setting the brightness level to L-01.
OVERVIEW
Functions
- Time / Alarm / Timer / Countdown
Getting started
- Insert the backup battery into the compartment, located on the back side of the clock.
- Connect the connection cable to the watch and the power supply.
- Plug the power supply into the socket.
Set the time
Set display brightness
Set the alarm clock
Timer
Countdown
Additional settings
- Display on/off
- Instead of entering numbers, you can also use press to save or wait for 3s
- The “FUNS” button on the back of the device corresponds to the remote control
- The “Funs” and EN/CN buttons on the remote control have no function
- The backup battery lasts approx. 1 week if no power supply is connected
- The flashing of the colons can be switched off with the brightness set to level L-01.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>