boAt Wave Arcade Smartwatch User Manual
- June 3, 2024
- Boat
Table of Contents
- boat Wave Arcade Smartwatch
- PACKAGE CONTAINS
- CONNECTING TO THE APP
- SYNCING YOUR SMARTWATCH TO THE APP
- NAVIGATING THROUGH THE FUNCTIONS
- SWIPE UP TO VIEW YOUR NOTIFICATIONS
- Product Parameters
- MAINTENANCE
- SAFETY & PRODUCT INFORMATION
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
boat Wave Arcade Smartwatch
Thank you for choosing the boAt Wave Arcade as your fitness transformation
companion.
Allow this manual to guide you through the functioning of your smartwatch.
Please read it thoroughly before using it for a smooth sail. You may refer to
these instructions for later use as well.
PACKAGE CONTAINS
- boat Wave Arcade x1
- USB magnetic charging cable xl1
- User Manual x1
- Warranty Card x1
CHARGING THE WATCH
The smartwatch must be charged before initial use. It takes 2 hours to be fuly
charged. Connect and charge the watch with the image below as a reference,
using a 5V/2A adapter.
Note: Once your watch is at 10% battery, it will automatically switch to power-saving mode which will disable all functions.
TURNING THE WATCH ON/OFF
To turn the watch on/off, long-press the side button for 3-5 seconds.You can
wake the screen by lifting your wrist
CONNECTING TO THE APP
-
Download the boAt Wearable app on your phone.
Available on both App Store (iOS 12.0 and above) & Google Play Store (Android 7.0 and above) OR Scan QRR CODE -
Connect the device with the boAt Wearables app
-
Select Arcade on the home screen of the app and click pair to connect.
-
Click on “pair” when you get a prompt to connect with ARCADE_BT. This is required if you want to attend calls on your watch.
-
Alternatively, you can go to your phone’s setting and pair ARCADE_BT manually.
-
To use all features of your Wave Arcade seamlessly, tap on yes’ to the ‘connection’ and grant access’ system prompt.
-
Turn your phone’s Bluetooth and GPS on.
-
Disable battery optimization
Note: To ensure connectivity throughout your journey, make sure the app is allo wed to run in the background of your phone at all times. IPhones wll not prompt any information unless you complete Bluetooth pairing with Wave Arcade
SYNCING YOUR SMARTWATCH TO THE APP
Data Synchronization
- Open the app on your phone.
- Make sure your wave arcade is connected to the app
- Synchronization will start automatically once you enter the app interface.
Note: Synchronize data at least once a day to avoid data loss in the watch.
NAVIGATING THROUGH THE FUNCTIONS
SWIPE RIGHT FOR MAIN MENU Sports
-
Tap on the sports icon to choose from 100+ sports modes: Run, Walk, Indoor Walk, Outdoor Cycle, Climbing, Yoga, Basketball, Footbal, Badminton, Skipping
Swimming. Cricket, -
Volleyball, Hockey. Judo, Rock Climbing, Air walker, Archery, Ballet Basebal, Beach
-
Volleyball, Billiard, Bowling. Break Dance, Cross Country Sking
-
Curling, Darts, Drive, Folk
-
Dance, Frisbee, Hula Hoop, Jujitsu, Kite Flying, Line Skating, Break
-
Dance and more!
-
Tap on your preferred activity to begi.
-
To pause or stop the exercise, press the home button, click finish to end the exercise.
WATCH FACES
Tap on this icon to change your watch face. Alternatively, long press the home
screen to change the watch faces.
There is total 20 built-in watch faces in the watch and 100+ available on the
cloud, which can be accessed through the app.
Menu Style
Tap on this to change the app view. (List and grid view) Tap on this icon to
access remote camera. Make sure your watch is connected with the app.
Shutter
Wear the watch on your wrist, then click on the icon to start measurements.
You can also view the data on the app.
Note: Your phone and watch must be connected via Bluetooth for this
feature to work Find My Phone ****
Blood Oxygen Level Monitor
Wear the watch on your wrist, then click on the icon to start measurements,
You can also view the data on the app.
Note: Measurements are for reference only and not for medical purposes.
Stopwatch
Tap on this to access stopwatch.
Countdown
Tap on this to access countdown.
Phone
Tap on this to access Favourite contacts, Call History & Dialer from here.
Add your contacts on the phonebook from the boAt
Wearables app. You can add up to 50 contacts.
Guided Breathing Mode
Click on the breath training icon to regulate your breathing with the
instructions given to relax.
Alarm Clock
Tap on this to access alarms
Calendar
Tap on this to check the calendar
Calculator
Tap on this to access calculator
Settings
You can access screen off, QR code, Reboot, Reset, Power off, About from this
menu.
BT Calling
-
You can acces BT calling feature from the shortcut menu or thr main menu.
-
To use the BT Calling feature, open the boAt Wearables app and pair the watch.
-
Once paired you will get the pop up on the app home screen to connect with Phone’s Bluetooth.
-
Click on “pair” to connect with phone’s Bluetooth
-
Alternatively, you can go to phone’s Bluetooth settings and pair “ARCADE BT” to start the calling feature on your watch
Note: Enable call alerts from the setting to get calls on the watch -
Up to 50 contacts can be saved in the phonebook.
-
Call history will show the latest call details.
-
Use a dialer to dial any number.
Note: To optimize the battery performance, BT calling will be on standby mode if not in use, it will be active as soon as you get an incoming call or if you make an outgoing call.
Heart Rate Monitor
Wear the watch on your wrist, then click on the icon to start measurements.
You can also view the data on the app.
Note: Measurements are for reference only and not for medical purposes.
Weather
Tap on this to know weather forecasts.
Enable weather feature from the app first
Music Control
Tap on the remote music control icon on your Wave Arcade to play music from
your phone.
Note: Some apps with different protocols might not work.
SWIPE UP TO VIEW YOUR NOTIFICATIONS
SWIPE LEFT TO ACCESS ALL DATA
You can access daily activity data, heart rate, sleep, weather, and other
widgets.
SWIPE DOWN FOR SHORTCUT MENU
You can access Power off, games, Screen off duration, phone, Voice Assistant,
Reboot, DND, Brightness, settings, QR Code, Lock Screen & Flashlight from here
Product Parameters
MAINTENANCE
Regularly clean your wrist and the strap of the smartwatch, especially after
sweating during exercise or being exposed to substances such as soap or
detergent, which may
get stuck on the other end of the product.
Do not wash the strap with a household cleanser. Please use soap less
detergent, rinse thoroughiy and wipe with a piece of soft towel or napkin
For spots or stains that are not easy to remove, scrub the area with rubbing
alcohol and then follow the above procedure
Search for the app to connect keeps failing
- Keep the boAt Wearables app updated to the latest version
- Close all the programs on the watch Stop and restart Bluetooth and GPS Connect again
- Check and enable notification functions of your phone and keep the phone and watch in close contact.
Note: Make sure your phone system meets Android 7.0 and above and ios 12.0 and above.
My Wave Arcade is receiving no alerts, texts, or phone calls
Make sure smart reminders on the app are on and synced to the Wave Arcade.
Also make sure your notification center of the phone is displaying messages.
Only then will your smartwatch also display those notifications.
Make sure app is running in the background and battery optimization feature on
the phone is disabled.
Make sure ARCADE BT is connected from the phone to receive calls on the watch
My Bluetooth keeps getting disconnected
- Make sure there is not more than 7m distance between Bluetooth on the phone and the watch.
- There is no obstacle in between the watch and the phone
- Make sure the app is running in background.
Which functions of the Wave Arcade need Bluetooth to work?
Call & Text Notifications, music control, camera control, weather forecast,
cloud and custom watch faces and Bluetooth calling need Bluetooth connectivity
to work.
Will it be okay to take a bath wearing the Wave Arcade?
The IP68 water resistance will only work under the following conditions:
- Maximum depth of water: 1.5m
- Maximum time for exposure to water: 10 minutes
The watch isn’t suitable for hot baths, hot springs, saunas, snorkeling, diving, water skiing and other wading or deep-water activities with high-speed water flow.
How to use Bluetooth calling feature on the watch?
- Open the boAt Wearables app, pair the watch with the app first.
- Once paired you will get the pop-up on the app home screen to connect with Phone’s Bluetooth
- Click on “pair” to connect with phone’s Bluetooth
- Alternatively, you can go to phone’s Bluetooth settings and pair “ARCADE_BT” to start the calling feature on your watch
How to add contacts in the watch?
Open App-> devices-> device info-> contacts
You can select up to 50 contacts from your phonebook which will be synced with
the watch.
Once you initiate the call from the watch, you can select caller name from the
list or directly dial the number from the dialer.
SAFETY & PRODUCT INFORMATION
Battery
Do not disassemble, bore or damage the battery.
Do not disassemble the built in batteries of non-replaceable battery devices.
Do not use sharp objects to remove the battery.
Health Warning
If you are wearing a pacemaker or other implanted electronic devices, please
consult your doctor before using the heart rate monitor of the watch.
The optical heart rate sensor will glow green. If you suffer from epilepsy or
are sensitive to blinking light sources, please consult your physician before
wearing this device.
The device tracks your daily activities through sensors. This data is intended
to tell you about your daily activities such as steps, sleep, distance, heart
rate and calories, but may not be completely accurate.
The device accessories, heart rate sensor, oxygen level monitor, and other
relevant data is designed for fitness and not for medical purposes. They are
not applicable to the diagnosis, monitoring, treatment or prevention of any
diseases or symptoms. The heart rate and blood pressure data is for reference
only, We’re not responsible for any deviation in data.
Avoid wearing the watch too tightly. Make sure you keep your skin dry – the area that comes in contact with the watch. If symptoms such as redness or sweling appear on your skin, immediately stop using the watch and consult the doctor
Things to keep in mind
Sync data everyday days to avoid data loss.
Water Resistance will not work for seawater, acidic and alkaline solutions,
chemical reagents and other corrosive liquid. The damage or defects caused by
misuse or improper use are not covered by the warranty.
Sports modes support up to 6 hours of exercise at a time
Avoid wearing the watch too tight in daily use. Keep the parts of skin
touching the watch dry.
Keep your arm still while measuring data for accurate measurement
Disclaimer: This product is an electronic monitoring product and is not intended as a medical reference. We reserve the right to modify or improve any of the functions described in this manual without any prior notice. At the same time, we hold the right to continuously update the product content.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT SUBsTITUTE DISPOSE OF
USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Old electrical appliances must not be disposed of together with the residual
waste, but have to be disposed of separately. The disposal at the communal
collecting point via private persons is for free. The owner of old appliances
is responsible to bring the appliances to these collecting points or to
similar collection points. With this little personal effort you contribute to
recycle valuable raw materials and treatment of toxic substances.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>