SECURITY & ALARM
LOW VOLTAGE
Instruction Manual

AHC-10 Adjustable Round Hole Cutter Fish Tapes Telescoping Poles

PREMIER TOOL MANUFACTURER OF OVER 800 TOOLS SINCE 1958

PREMIUM QUALITY THAT IS GUARANTEED FOR LIFE
SHIP 98.7% OF ALL ORDERS COMPLETE WITHIN 24 HOURS
99.3% IN STOCK RATE
NEW PRODUCT INTRODUCTIONS EVERY MONTH
Jonard Tools® manufactures over 800 unique tools for the Telecom, CATV, Fiber Optic, Home Automation, Security & Alarm, and Electrical markets.
We design and engineer patented products by utilizing customer partnerships to create innovative solutions for industry needs. New tools are released each month and are Made For Life® with lifetime warranties.
We are driven to continually anticipate our customers’ changing needs and our dedication to the customer shows in everything we do.
TEL 914.793.0700 | FAX 914.793.4527 | JONARD.COM

Security & Alarm Tools

Adjustable Round Hole Cutter, 2.2″-10″ – AHC-10
The Jonard Tools AHC-10 adjustable hole cutter is designed for cutting round holes in ceilings, walls, and floors and is the perfect tool for installing recessed speakers, lighting, or other round objects.
Replacement Blades (Pack of 2): AHC-10RB

https://uqr.to/nrep

Cable Comb
Cable Organizing Tool – CCB-25 Neatly bundle your cables! Jonard Tools’ Cable Comb® Cable Organizing Tool substantially reduces the amount of time it takes to straighten, organize, and lash multiple cables together with ease.
The Cable Comb also features the following:

• Compatible with any cables or wires up to 1/4″ (6.35 mm) in diameter, such as: Coaxial (not RG6 Quad), Plenum, Control, CAT5/5E/6 Network, Speaker, and Alarm Cables and Wires
• Holds up to 24 cables (0.25″ in diameter)
• Unique design allows individual cables to be loaded into the orange inner hub at any point during use without the need to find and thread the cable ends
• Cables can also be removed at any point during use by sliding the blue outer collar back and removing them through the large opening of the collar

https://uqr.to/p8y0

Fish Tapes
Designed for easier payout and rewind, these Fish Tapes Reels are perfect for pulling wire or cables through conduit, walls, or under carpets. These also feature the following:

• Made from a high strength spring steel to handle heavy-duty wire pulls with ease

(1.6 mm) thick x 240 feet (73.2 m)
WEIGHT| 2.5 lbs (1.13 kg)| 6.8 lbs (3.08 kg)
QR CODES|

https://uqr.to/nrge

|

https://uqr.to/nrge

Telescoping Poles
Designed to provide more control and accuracy than the competitors, these telescoping poles are perfect for installing or retrieving cables in drop ceilings or other hard to reach places. Includes: C & K hooks (to help grab/push cables), adapter (to replace the platform for navigating tight spaces), and small carrying pouch.
RDT-12K Length: 12′ RDT-18K Length: 18′ Accessory Replacement Kit for RDT-18K: RDT-3RH

|
---|---
https://uqr.to/12pc6| https://uqr.to/nrl9

Accessory Replacement Kit for RDT-18K – RDT-3RH
This product is the Replacement Accessory Kit for the RDT-18K telescoping pole.
This accessory kit includes the following:

Kit includes:

• RDC-35 C Hook for hooking wires, cables, and other objects
• RDK-5 K Hook for push and pull cable installation or retrieval
• Compact adapter replaces the platform to navigate tight spaces

Magtime™ Magnetic Cable Holder (Pack of 25) – MF-25/25
Made of neodymium (a rare earth magnet), these cable holders quickly and easily allow the technician to install cables without any drilling, screwing or nailing required. These powerful magnets can hold a substantialnumber of cables based on the size chosen. Hang wires in high places fromthe ground using a telescopic pole with the cable pole adapter.

https://uqr.to/sr1w

Magtime™ Cable Pole Bracket – MF-45
The MF-45 is the RDT-18K Telescopic Pole adapter to be used with the MAGTIME series of magnetic cable holders to place in locations typically requiring a ladder or other lifting device. The MF-45 is made from Tough ABS plastic and is flexible to allow for ease of use and ruggedenough to withstand accidentally being dropped from heights over 10ft.

https://uqr.to/s6gu

Electrical Knockout Kit – WBK-100
The Jonard Tools WBK-100 Electrical Panel Knockout Kit is designed to open knockouts from electrical panels without damaging the panel orcutting holes in the drywall quickly and easily.
Kit includes:
(1) panel buddy and (1) modified screwdriver

https://uqr.to/nrlm

Technician’s Tool Bag Backpack – BP-100
Jonard Tools’ Technician’s Tool Bag Backpack features 36 organizer pockets and 12 pocket straps to hold all your tools in place with a durable water resistant base to protect it from the elements. It also hasa hard, molded front pocket for delicate items, like safety glasses, and afront zipper to hold loose parts.

• Hard, molded front pouch protects safety glasses or other delicate items
• 20” high bag provides ample room for long screwdrivers and tools

https://uqr.to/wiq9

Kits include:
24″ or 36″ Flexible Magnetic Retriever
MRS-BC10 12′ Ball Chain with 3/4″ Stop Ring
MRS-RH20 Expandable Retriever Hook
Eyelet Retriever (MRS-36 only)
Storage Pouch

MagneTriever ® – MRS-24
The MRS-24 – MagneTriever® is the ideal tool to effortlessly fish wires through walls.

https://uqr.to/nrlc

MagneTriever® Pro – MRS-36
The MRS-36 – MagneTriever Pro is the professional tool to effortlessly fish wires through walls using its 36″ magnetic retriever, bullet nose, and reinforced 12′ ball chain.

https://uqr.to/10j6d

Magnamole Magnetic Cable Guide Kit – MM-800
Quickly threads wire and cable through cavity walls and void spaces.
Threads at an angle and safely through other wire and cable obstacles.
Saves time, saves money, and sharply reduces the risk of accidents.
Kit includes:
1 Magnetic Rod (17″), 2 Magnetic Extensions (14″), 5 Magnetic Caps, Storage Pouch

https://uqr.to/nrlf

Replacement Magnets (2 Magnetic Caps of Each Color)
CAP COLOR & CABLE DIAMETER| (Red) 0.169″ to 0.205″; (Blue) 0.230″ to 0.295″| (White) 0.145″ to 0.169″; (Gray) 0.173″ to 0.201″; (Black) 0.205″ to 0.232″
CABLE USED WITH| CAT5 RG6, RG6 TRI, RG6 Quad| CAT3, 3.1 mm Simplex Fiber Optic Cable, CAT5, CAT5E, RG59, 12AWG Romex
QR CODE|

|

Glow Rods and Accessories
These glow rods are 3/16″ in diameter with medium flexibility and 8-32 size threads. The rods are made of luminescent fiberglass and the connectors are made of stainless steel. The RDG-FLW WhiskLight® is included in the RDG-RP4A accessory kit (and the RDG-15A and RDG-30A) are sold separately.

https://uqr.to/1bk5t

|

https://uqr.to/nrld

|

https://uqr.to/nrle

|

https://uqr.to/nrg4

|

https://uqr.to/1bk5v

4 Piece Glow Rod Attachment Replacement Kit+ – RDG-RP4A
This product is the attachment head replacement kit for the RDG-15A and RDG- 30A Glow Rod Kits.
Kit contains: Ball Chain, Eyelet, Hook, and RDG-FLW WhiskLite ®.

https://uqr.to/s6gn

WhiskLight ® – RDG- FLW
Designed to illuminate dark areas and guide glow rods through acoustical ceilings or crawl spaces, the WhiskLight is the perfect flashlight or whisk attachment head for glow rods and fish sticks.

https://uqr.to/nrg5

Reference Point Locator – MP-800
Designed with a precise signal transmitter and locator, this Reference Point Locator pinpoints the exact location to drill or cut through a wall, so no more guesswork.
Kit includes:
Transmitter, Receiver, 2 9V Batteries, Tack Adhesive, Instruction Sheet, Carrying Case

https://uqr.to/nrlk

Wall Templates & Levels
Designed specifically for cutting out old work boxes, this wall template level is perfect for ensuring the boxes are level every time.

Box Template & Level for Non-Metallic Boxes, 3-Gang and 4-Gang
ELECTRICAL BOX TYPE| Non-Metallic, Old Work| Metallic, Old Work| Non- Metallic, Old Work
NO. OF GANGS| 1-Gang, 2-Gang| 1-Gang, 2-Gang| 3-Gang, 4-Gang
QR CODE| | |

Electrical Wall Box Cutters
Cuts drywall in seconds making installation of electrical boxes fast and easy. The EBC-400 cuts a 2-3/8″ x 3-3/4″ hole for single gang boxes and the EBC-800 cuts a 4″ x 3-3/4″ hole for double gang boxes.

https://uqr.to/nrll

Available Kits:

• EBW-412 kit includes the WTL-12 and EBC-400
• EBW-812 kit includes the WTL-12 and EBC-800

https://uqr.to/s6gj

Steel Cable Caddies
These sturdy cable caddies are constructed of 0.06″ thick tubular steel that is 7/8″ in diameter and feature the following:

• Folding mechanism for easy storage

• Sturdy steel construction with dual leg chains for increased stability and longer life

• Portable and compact design to make it easy to store and move around job sites

• Able to hold cable reels weighing up to 100 lb (45.4 kg)
  Easy setup by just placing cable caddy on the floor, removing the cotter pin, and loading the reel

• Slip-resistant rubber feet to prevent the caddy from slipping while also protecting floors from damage

SPECS| CC-2721| CC-2721WS| CC-2726| CC-2726WS| CC-5442
---|---|---|---|---|---
STYLE| Standard| With Wheels & Pull Strap| Standard| With Wheels & Pull Strap| Double Deck
OVERALL WIDTH| 21″ (53.3 cm)| 21″ (53.3 cm)| 26″ (66.0 cm)| 26″ (66.0 cm)| 21″ (53.3 cm)
OVERALL HEIGHT| 27″ (68.6 cm)| 28″ (71.1 cm)| 27″ (68.6 cm)| 28″ (71.1 cm)| 27″ (68.6 cm)
SPOOL ROD DIAMETER| 5/8″ (15.88 mm)| 5/8″ (15.88 mm)| 5/8″ (15.88 mm)| 5/8″ (15.88 mm)| 5/8″ (15.88 mm)
MAXIMUM SPOOL WIDTH| 17″ (43.2 cm)| 17″ (43.2 cm)| 22″ (55.88 cm)| 22″ (55.88 cm)| 17″ (43.2 cm)
MAXIMUM SPOOL DIAMETER| 20″ (50.8 cm)| 20″ (50.8 cm)| 20″ (50.8 cm)| 20″ (50.8 cm)| 20″ (50.8 cm)
MAXIMUM SPOOL WEIGHT| 100 lb (45.4 kg)| 100 lb (45.4 kg)| 100 lb (45.4 kg)| 100 lb (45.4 kg)| 100 lb (45.4 kg)
QR CODE| | | | |

INTRODUCING

MULTIPURPOSE WIRELESS INSPECTION CAMERA & CABLE PULLING TOOL
perfect for ANY iNdustrY

Multipurpose Wireless Inspection Camera & Cable Pulling Tool
The WiSpy is a professional and durable inspection camera ideal for any hard to see inspections.

https://uqr.to/16jpd

• App controlled variable focus lens
• “Always Up” viewing mode
• Fast charging
• Able to change resolution and WiFi channel
• Designed with a hole for right angle mounting eliminating the need for a right angle adapter

Telescoping Pole, 5 ft (11 ft Total Reach)
(Part # CFP-60)
Designed to extend a full 5 feet (1.52 meters) while providing exceptional control and accuracy, this telescoping pole is perfect for holding the WiSpy® camera or installing and retrieving cables in drop ceilings or other hard to reach places.

https://uqr.to/16kc6

Cell Phone Wrist Band, 11″
(Part # CWB-11)
The Jonard Tools CWB-11 is the perfect companion to our WiSpy camera. This wrist band holds your cell phone allowing for hands-free use while you use our WiSpy ® product for your inspection and viewing needs.

https://uqr.to/qakf

COAX Stripping Tools
The UST Series creates a two step strip on a multitude of cables (and the UST-175 provides a three step strip). These tools include a Velcro® strip for folding back the braided shield of the cable. Blade cartridges are interchangeable and last over 5,000 strips.

SPECS| UST-1596| UST-100| UST-125| UST-135| UST-150| UST-175| UST-185
---|---|---|---|---|---|---|---
DESCRIPTION| COAX Stripping Tool with Twin RG59/6 Blade| RG59/6 & 7/11
COAX Stripping Tool| COAX Stripping Tool For RG59/6 & 7/11 with Cable Stop| COAX Stripper for RG7/RG11| CAT/TP & RG59/6
Cable Stripping Tool| Mini COAX Cable Stripper| Mini COAX Cable Stripping Tool
HANDLE COLOR| Blue| Blue| Blue| Blue| Blue| Yellow| Blue
CABLE TYPE| COAX| COAX| COAX| COAX| COAX| COAX| Dual/Quad Shield Mini COAX
CABLE SIZE| RG59 and RG6| RG59 and RG6, RG7 and RG11| RG59 and RG6, RG7 and RG11| RG7 and RG11| RG59 and RG6, UTP| Mini COAX| Mini COAX
BLADE CARTRIDGE| UST-210| UST-205| UST-225| UST-235| UST-215| UST-220| UST-230
QR CODE| https://uqr.to/nrii|

https://uqr.to/nrid

|

https://uqr.to/nrie

|

https://uqr.to/nrgs

|

https://uqr.to/nrif

|

https://uqr.to/nrig

|

https://uqr.to/nrih

Stripping Tool RG59/6
HANDLE COLOR| Blue| Blue| Yellow| Blue
CABLE TYPE| COAX, Network, Flat Telephone Cable| COAX, Network, Flat Telephone Cable| COAX, Network, Flat Telephone Cable| COAX, Network, Flat Telephone Cable
CABLE SIZE| RG-59/6/7/11 COAX, CAT3/4/5E/6/6A Network, up to 1 cm wide Flat Cable| RG-59/6/7/11 COAX, CAT3/4/5E/6/6A Network, up to 1 cm wide Flat Cable| RG-59/6 COAX, CAT3/4/5E/6/6A
Network, up to 1 cm wide Flat Cable| RG-59/6 COAX, CAT3/4/5E/6/6A Network, up to 1 cm wide Flat Cable
BLADE CARTRIDGE| UST-205| UST-225| UST-240| UST-210
QR CODE|

https://uqr.to/nrij

|

https://uqr.to/nrik

|

https://uqr.to/nrgt

|

https://uqr.to/nril

COAX Stub End Strippers
The CSS Series tools are coaxial cable strippers specifically designed to strip a stub end of a COAX cable in a wall outlet box, which eliminates the need to run new cable, saving time and money. Each CSS tool provides a two step strip of an RG59/6 cable to a specific braid length and center conductor length (shown in the chart below). The built-in strip stop insures the strip lengths are consistent.
Easy to use:
Squeeze handles to open jaws and insert cable, release to close jaws, rotate like a screwdriver and remove. Tool will not cut the braid or score the center conductor.
Blade cartridges are easily changed and replaced.

SPECS| CSS-596| CSS-5097| CSS-5110| CSS-5127| CSS-5156| CSS-5610| CSS-59M
---|---|---|---|---|---|---|---
DESCRIPTION| COAX Stub End  Stripper (RG59/RG6)| COAX Stub End Stripper (9 mm/7 mm)| COAX Stub End Stripper (10 mm/10 mm)| COAX Stub End Stripper (12 mm/7 mm)| COAX Stub End Stripper (15 mm/6 mm)| COAX Stub End Stripper (6 mm/10mm)| Mini COAX Stub End Stripper (9 mm/7 mm)
BLADE CARTRIDGE| CSS-105| CSS-115| CSS-120| CSS-110| CSS-130| CSS-125| CSS-135
BLADE CARTRIDGE COLOR| Black| Light Blue| Blue| Grey| Brown| Burgandy| Orange
BRAIDED STRIP LENGTH| 1/4″| 9 mm| 10 mm| 12 mm| 15 mm| 6 mm| 9 mm
CENTER CONDUCTOR STRIP LENGTH| 5/16″| 7 mm| 10 mm| 7 mm| 6 mm| 10 mm| 7 mm
QR CODE|

https://uqr.to/nri8

|

https://uqr.to/nri9

|

https://uqr.to/nria

|

https://uqr.to/nrib

|

https://uqr.to/nrf0

|

https://uqr.to/nrf1

|

https://uqr.to/nrf1

Compression Tools
Many different fittings are used to terminate RG6 and RG59 COAX cables. Jonard offers compression tools to work with all types of (BNC, PPC, Beldon, and more). See jonard.com for a list of all compatible connectors.
CT-200 – Universal Compression Tool designed for use on most F connectors (RG59, RG6, & RG11), BNC connectors (RG59 & RG6) and RCA connectors (RG59 & RG6).
CTF-200 – Compression tool with a fixed design for use on the longer style F connectors (such as PPC EXXLWS Aquatight connector, EX-XL and other similar length connectors).
CTF-200CG – Compression tool with a fixed design for use on Corning Gilbert connectors. Tool also works with brands such as PPC & Thomas Betts.
CTF-230 – This dual compression tool is two tools in one, combing the features of the CTF-200 and the CTF-300.
It is designed for use on either short or long F connectors (such as PPC EX6 and PPC EX6XL), and also works on most RG11 connectors. The green ring side of the plunger is for the “short” PPC EX6 style.
CTF-300 – Compression tool with a fixed design for use on the shorter style F connectors (such as PPC Aquatight Connector EX or shorter connectors and other similar length connectors).
CTF-360XL – Designed to hold and compress connectors requiring a full 360 degree support. Perfect tool for long F connectors for RG59/6 cables and for RG7/11 cables.

SPECS| CT-200| CTF-200| CTF-200CG| CTF-230| CTF-300| CTF-360XL
---|---|---|---|---|---|---
DESCRIPTION| Universal Compression Tool| Compression Tool Fixed – Long| Compression Tool Fixed – Long CG| Dual Compression Tool – Short and Long| Compression Tool Fixed – Short| 360° Compression Tool for Long RG6, & RG11 Style F connectors
CONNECTOR TYPE| Adjustable| Fixed| Fixed| Fixed| Fixed| 360, F Long
CONNECTOR LENGTH| Short & Long| Long| Long| Short & Long| Short| Long
HANDLE COLOR| Green/Blue| Blue| Blue| Green/Blue| Green| Red
REPLACEABLE PLUNGER P/N| 21881| N/A| N/A| 21912| N/A| N/A
QR CODE|

https://uqr.to/nrim

|

https://uqr.to/nrin

|

https://uqr.to/nrio

|

https://uqr.to/nriq

|

https://uqr.to/nrio

|

https://uqr.to/1a1sv

360° Compression Tool – RG59 and RG6 Connectors – CTF-180
The Jonard Tools 360° Compression Tool is designed for use on both short and long style F connectors. The tool is ideal for installing CATV network cables.
Compatible Connectors: PCT or other brand short and long style F connectors

https://uqr.to/nrir

360° Compression Tool for Short RG6 & RG11 Style F Connectors – CTF-360
Using specially designed jaws to hold connectors in place while compressing, this PATENTED CTF-360 is designed to hold and compress connectors requiring a full 360° support. Perfect tool for short F connectors for RG59/6 cables and F connectors for RG7/11 cables.

https://uqr.to/nrf3

Web Slitter & Shaving Tool – WSS-4625
Designed to slit and shave the webbing off messengered hardline COAX cables and figure 8 fiber cables, the Jonard Tools WSS-4625Web Slitter and Shaver is the perfect tool for working with aerial messenger cables ranging from 0.400″ to 0.625″ in diameter.
Replacement Blade Cartridge: WSS-4625RB

https://uqr.to/rbz4

COAX Cable Gripping Tool – CG-100
Designed to grip RG59, RG6, RG7, and RG11 cables, this COAX cable gripping tool facilitates the stripping, slitting, splicing, and other functions of coaxial cables.

• Soft rubber material conforms to the shape of the cable to grip it tightly
• Compact shape and belt loop hole make it convenient for storage and transport

https://uqr.to/rbyw

Pass-Through Connectors
These high quality connectors are used to terminate network cables with a pass-through crimper.
They use gold plating on contact surfaces and tripoint prongs for greater signal strength.

SPECS| RJ45-R510| RJ45-525| RJ45-550| RJ45-5100| RJ45-625| RJ45-650| RJ45-6100
---|---|---|---|---|---|---|---
QUANTITY| 10| 25| 50| 100| 25| 50| 100
NETWORK CABLE TYPE| CAT5, CAT5E
Cables| CAT5, CAT5E Cables| CAT5, CAT5E Cables| CAT5, CAT5E Cables| CAT6, CAT6A Cables| CAT6, CAT6A Cables| CAT6, CAT6A
Cables
QR CODE| | | | | | |

6-in-1 Crimping Tool, RJ45 Pass-through & RJ11/12 Modular – UC-4569

https://uqr.to/nrgo

Designed to crimp RJ11/12 and RJ45 connectors onto CAT3, CAT5/5E, and CAT6 cables, this pass-through connector crimper is perfect for any network installer. This crimper features the following:

• Easily crimps pass-through RJ45 connectors without any measuring needed
• Crimps 4, 6, and 8 position modular connectors (RJ11/12 and RJ45)
• Cleanly trims the wires flush to the end face of pass-through RJ45 connectors
• Intended for use with 28-22 AWG flat/round, solid/stranded telephone anddata cables
• Ratcheted, ultra-stable platform for consistent terminations with low hand force Replacement Blade Set (Pack of 6): UC-4569RB

Modular 6-in-1 Crimping Tool – UC-864

https://uqr.to/nrgq

Designed for cutting, stripping, and crimping RJ11, RJ12, RJ22, and RJ45 connectors onto CAT3, 5E, and CAT6 cables, this connector  crimper is perfect for any network installer. This crimper features thefollowing:

• Ratcheted, ultra-stable platform for consistent terminations with low hand force
• Tool includes built-in jacket strippers for round and flat cables 22-28 AWG(0.32-0.64 mm diameter)
• 2 crimping slots: one for 8 position modular connectors and one for 6 and 4 position modular connectors

Cable Parameters: 22-28 AWG (0.32 mm-0.64 mm diameter) flat or round, solidor stranded, telephone or data

VDV Installation Took Kit – TK-RJ550
This kit provides all the necessary tools for cutting, crimping and terminating CAT5 and CAT5E network cables.

https://uqr.to/qakh

Kit includes:

Termination & Removal Tool – EP-QTH38B
The EP-QTH38B tool is used for terminating, bridging, and removing wires from 2-beam or 3-beam, insulation-slicing, quick-clip terminals found on QCM486 (MPC) and 391Q connectors, and on Versa blocks with quick-clip pins.

https://uqr.to/nrob

Quick Clip Insertion Tool – JIC-950C
Designed to cut and insert 22 and 24-gauge wire into terminal blocks, this multipurpose wire insertion tool is the perfect tool for performing several critical functions for wire insertion.
Replacement Blade: JIC-955

https://uqr.to/nroc

T Handle Security Wrenches

Designed for use on tamper-proof hex-type security screws or other   hex-type screws, this security wrench is the perfect tool to use when dealing with 5/16″ and 1/2″ hex tamper-proof fasteners.

https://uqr.to/1fmpo

BW-512 T Handle Security Wrench 5/16″

BW-516 T Handle Security Wrench 1/2″

https://uqr.to/nroi

Booth Wrenches
Designed for use on communication and pedestal boxes, this booth wrench is perfect for opening 5/32″ hex tamper-proof fasteners. These wrenches are heat treated carbon steel for maximum durability.

https://uqr.to/nroh

BW-532-3 Booth Wrench 3″ Long Shaft
BW-532 Booth Wrench 6″ Long Shaft

https://uqr.to/swnq

EPD Series Punchdown Tools
Sleek ergonomic design for easy effective wire termination. Tested up to 100,000 cycles at high-impact setting. Use to properly set, seat and terminate wire. Simply position the wire, push tool, and listen for confirming click. Wire is properly seated.

https://uqr.to/nro7

• Hi/Low impact setting
• Combination Hook/Spudger stored in the chassis
• Color coded yellow on the CUT side
• Enlarged blade storage compartment
• EPD-914 Punchdown Tool without blade (shown in picture)

EPDS Series Punchdown Tools w/ Grip
Designed for use with our EPB-series blades or other similar brands, this punchdown tool is perfect for any telecom or data communications installer. This punchdown tool features the following:

https://uqr.to/ygiz

• Hi/Low impact setting
• Combination Hook/Spudger stored in the chassis
• Color coded yellow on the CUT side
• Enlarged blade storage compartment
• EPDS-914 Punchdown Tool without blade (shown in picture)

Punchdown Tool Kits

JONARD P/N| EPD-914| EPDS-914| EPB-66| EPB-110| EPB-116| EPB-630| EPB-KR| EPB-KRONE
---|---|---|---|---|---|---|---|---
EPD-91461| X| | X| X| | | |
EPD-91466| X| | X| | | | |
EPD-914110| X| | | X| | | |
EPD-914116| X| | | | X| | |
EPD-914630| X| | | | | X| |
EPD-914KR| X| | | | | | X|
EPD-9KRONE| X| | | | | | | X
EPDS-91461| | | X| X| | | |
EPDS-91466| | X| X| | | | |
EPDS-914110| | X| | X| | | |
EPDS-914116| | X| | | X| | |
EPDS-914KR| | X| | | | | X|
EPDS-9KRONE| | X| | | | | | X

Punchdown Tool Blades

BIX Punchdown Tool – EP-16A
Designed to terminate cables, pigtails, and jumper wires, this punchdown tool is perfect for use on all BIX, GigaBIX, and UMOXS cross-connect system connectors. This punchdown tool features the following:

• Single action and spring activated for ease of use
• Terminates 22-26 AWG plastic insulated solid copper conductor wires

https://uqr.to/nro9

Non-Impact Punchdown Tool – ENI-110

https://uqr.to/nroa

Designed as an economical option for inserting wire, this patented non-impact punchdown tool is perfect for small do-it-yourself jobs on a 110-terminal block. This non-impact punchdown tool features the following:

• Small and lightweight design for ergonomics and storage
• Singlehandedly switch between cutting and non-cutting blade

Punchdown Tool Kit for Data & Telecom – TK-17
Designed to prepare and connect wire onto 66-type and 110-type punchdown terminal blocks, this punchdown tool kit has the tools needed for maintaining telecommunications and data communications networks.

https://uqr.to/nros

Kit includes:

• CST-1i Cyclops Wire Stripper, can use on UTP/STP Cable
• EPD-91461 Punchdown Tool with 2 Blades (66 & 110)
• ES-1964ERG Ergonomic Electrician’s Scissors
• FL-2000 LED Flashlight with Zoom Lens
• H-75 Molded 7 Pocket Pouch with Belt Clip
• JIC-22035 Probe Pick
• JIC-22148 Combo Crimper, Long Nose Pliers
• SD-61 Screwdriver Multi-Bit 6-in-1 w/Phillips and Slotted Bits

Can Wrenches
These double ended can socket wrenches are designed to fit over long binding posts and open telephone box fasteners. They can tighten nuts on binding-post terminals and access tight spaces such as locking devices on terminals and cabinets. 7″ long.

https://uqr.to/nrof

(Built-in 22-24 AWG Wire Stripper)
SK-51632| Security Key Insert for Hex Security Screws 5/16″, 5/32″
SSK-600| Star Key Can Wrench Kit for LQ & LB Patterns

Electrician’s Scissors
Designed for heavy duty use, these electrician’s scissors are made of chrome vanadium steel and reinforced with a special hardening process for greater durability and cutting performance.

https://uqr.to/nrnl

|

https://uqr.to/nrnm

|

https://uqr.to/nrnn

Stainless Steel Communication Scissors – JIC-195

https://uqr.to/nrol

Designed for telecom and electrical applications, these heavy duty scissors are the perfect tool for cutting cables up to 1/4″ diameter and for other objects as well.

• One blade is serrated for a tight and secure grip while cutting
• High carbon stainless steel blades for maximum strength and durability

Heavy Duty Scissors w/ Wire Stripper – JIC-183

https://uqr.to/nrok

Designed to cut copper, aluminum, leather, plastic, and other materials, these heavy duty scissors are the perfect tool for cutting cables up to 1/4″ in diameter. These scissors feature the following:

• One blade is serrated for a tight and secure grip while cutting
• Wire stripper accommodates 12 AWG, 14 AWG and 18 AWG (2.0, 1.5 and 1.0 mm 2 cross sectional area) wire
• Dual component polypropylene (PP) and thermoplastic rubber (TPR) gripfor greater comfort and ergonomics
• Includes a safety locking mechanism and adjustment screw for convenience
• Not for use on stainless steel or other hardened/heat treated metals

Ergonomic Cable Splicing Knife – KN-7

https://uqr.to/nrom

Designed with an extremely sharp cutlery steel blade, this cable splicing knife is perfect for cutting through some of the strongest types of cablesincluding many types of insulation. This knife features the following:

• Short 1 3/4″ blade with 6 1/4″ handle for better control and reduced hand fatigue
• Coping blade is made from high strength cutlery steel and is tempered to maintainits edge with repeated use

Insulated Cable & Duct Sheathing Knife – KN-200INS

https://uqr.to/1g0r2

Designed with a curved blade and insulated handle, this cable sheathing knife is the perfect tool for slitting or cutting the sheathing off cables without damaging the conductor insulation inside.

• Ultra sharp, dual-sided blade can cut cable or duct jacket sheath fromeither side by pushing or pulling the tool through the cable

Heavy-Duty Utility Knife – UKN-3

https://uqr.to/nrgr

Designed for heavy duty use, this utility knife is the perfect addition to any tradesman or technician’s tool kit.
Replacement Blades: UKN-50RB

Knife and Scissor Sharpener – KSS-1

https://uqr.to/nron

Designed to restore the edges of knives and scissors in one convenient tool, this knife and scissor sharpener is made of diamond-polished high grade tungsten-carbide steel. This knife and scissors sharpener features the following:

• Diamond-polished high grade tungsten-carbide steel blades will restore the edges of scissors or knives with only 3-4 strokes

Lineman’s B Wrench – JIC-650

https://uqr.to/nroj

Designed with two open-ended wrench heads and an oval hole for turning pole steps, this Bell System Type wrench is perfect for telecom and datacom work applications and features the following:

• Large end of the wrench accommodates 5/8″ and 3/4″ bolts
• Small end of the wrench accommodates 3/8″ bolts, 1/2″ bolts, and 1/2″ drive screw heads

3 Piece Adjustable Wrench Set – 6″, 8″, 10″ w/ Extra Wide Jaws – AW-6810

https://uqr.to/nrni

Jonard’s adjustable wrenches are made of chrome vanadium steel with a chrome plated finish. They are forged and heat treated for maximum strength.

Kit includes:
AW-6 Adjustable Wrench 6″ with Extra Wide Jaws
AW-8 Adjustable Wrench 8″ with Extra Wide Jaws
AW-10 Adjustable Wrench 10″ with Extra Wide Jaws

Adjustable Wrench 12” with Extra Wide Jaws
JAW CAPACITY| 15/16″ (24 mm)| 1 1/8″ (29 mm)| 1 5/16″ (33 mm)| 1 1/2″ (38 mm)
OVERALL LENGTH| 6″ (152 mm)| 8″ (203 mm)| 10″ (254 mm)| 12″ (305 mm)
QR CODE|

ttps://uqr.to/nret

|

https://uqr.to/nreu

|

https://uqr.to/nrer

|

****https://uqr.to/nres

Right Angle Torque Wrench, Swivel Head, 10 in-lb- TWSW-10SK

https://uqr.to/nrgm

Designed to properly torque 5/32″ security screws with a preset torque of 10 in-lb, this swivel head torque wrench is perfect for Network Interface Device (NID) mounting. This torque wrench features the following:

• Can be used with any 3/8″ drive sockets, including our TWS-532 (sold separately)

5/32″ Hex Security Socket 3/8″ Drive (Pack of 10) – TWS-532/10

https://uqr.to/nrgl

Designed to be used on 5/32″ security screws with an appropriate driver, these hex security sockets are perfect for Network Interface Device (NID) mounting. These drive sockets include the following:

• Provides a snug fit when used on 5/32″ security screws
• Can be used with any 3/8″ torque wrenches or drivers

https://uqr.to/nrgm

Splicer’s Kit – TK-400

https://uqr.to/nroo

Featuring an ergonomic cable splicing knife and electrician’s scissors in a comfortable leather pouch, the TK-400 Splicer’s Kit is the perfectcompact tool kit for cable splicing needs.

Kit includes:

• ES-1964 Electrician’s Scissors
• H-40 Leather 2 Pocket Tool Pouch
• KN-7 Ergonomic Cable Splicing Knife

Telephone Installer Splicer’s Kit – TK-22148

https://uqr.to/nrop

Designed for stripping, splicing, and crimping telephone or electrical cables, the TK-22148 Telephone Installer’s Splicer Kit is the ideal compact tool kit for telephone installers and technicians.

Kit includes:

• ES-1964 Electrician’s Scissors
• H-36 Molded 2 Pocket Tool Pouch
• JIC-22148 Combo Crimper, Long Nose Pliers

5 Piece Telecom Installer’s Kit – TK-50

https://uqr.to/nroq

The Jonard Tools TK-50 5 Piece Telecom Installer Kit is the perfect kit for simple installations and includes the basic necessary tools for telecom installers.

Kit includes:

• ES-1964 Electrician’s Scissors
• H-50 Molded Five Tool Pouch
• JIC-22035 Probe Pick
• KN-7 Ergonomic Cable Splicing Knife
• M-216CS22 Ergonomic Can Wrench with Wire Stripper

16 Piece Security & Alarm Tool Kit+ – TK-611

****https://uqr.to/swo0

Designed specifically for the security and alarm industry, the TK-611 16 Piece Security & Alarm Tool Kit provides all the tools needed to prep COAX, network, and power cables for termination as well as tools for tracing and testing applications.

Kit includes:

Cables
WSC-826| Wire Stripper & Crimper, 8-26 AWG

Smart Phone & Tablet Repair Tool Kit – TK-19

https://uqr.to/nrnq

This product is a repair tool kit for opening and repairing all series of smartphones and tablets. This kit contains all the tools you need to take apart these highly specialized electronic devices and also repair or replace broken screens. It’s perfect for DIY repair jobs as well as the repair technician.

Kit includes:

• Ergonomic Screwdriver Handle
• (13) 4 mm bits
• 2 Plastic Prying Tools
• Guitar Pick
• Opening Tool
• Suction Vacuum Opener
• SIM Eject Tool
• Tweezer
• Storage Case

COAX Tool Kits
Service kits for CATV technicians to repair and maintain COAX cable networks.

JONARD P/N| DESCRIPTION| TK-78| TK-82| TK-83| TK-85| TK-86| TK-87| TK-89
---|---|---|---|---|---|---|---|---
CT-200| Universal Compression Tool| | | | X| X| | X
CTF-180| 360 Degree Compression Tool for RG59/6| X| | | | | |
CTF-200| Compression Tool Fixed – Long| | X| | | | |
CTF-230| Dual Compression Tool| | | | | | X|
CTF-300| Compression Tool Fixed – Short| | | X| | | X|
FL-2000| LED Flashlight with Zoom Lens| X| X| X| X| X| X| X
H-85| Molded 8 Tool Pouch| X| X| X| X| X| X| X
JIC-2288| Plier, Diagonal, Cutter, 8″| X| X| X| X| X| X| X
PT-300| Pocket Continuity Tester & Toner| X| X| X| X| X| X| X
SD-61| Screwdriver Multi-Bit 6-in-1| X| X| X| X| X| X| X
TWAF-71630| Torque Wrench, Full Head 7/16″, 30 in-lb| X| X| X| X| X| X| X
UST-125| Cable Stripper RG59/6 & RG7/11 w/ Cable Stop| X| X| X| X| | X|
UST-150| COAX RGB59, RG6, & CAT/TP Twisted Pair Cable Stripper| | | | | X| |
UST-185| Mini COAX Cable Stripper| | | | | | | X
QR CODE| | | | | | |

LED Flashlight w/ Zoom Lens – FL-2000

https://uqr.to/nrnh

Powered by a single AA alkaline battery, this high strength LED flashlight is perfect for illuminating dark places and features the following:

• Ultra-bright 120 lumen LED can be easily adjusted by simple in-and-out movement and the zoom lens can focus the light to hone in on a specific area, or zoom out to flood the area with light
• Rugged aluminum housing with clip-on lanyard keeps this flashlight secure

Hollow Shaft Nut Drivers
These are full length hollow shaft nut drivers intended for working with long bolts. They are designed with cushion gripped ergonomic color coded handles. Handles provide greater torque and user comfort. Overall length 7″. ASME Standard/YR: B107.12-2004.

SPECS| ND-6301132| ND-63012| ND-63014| ND-630316| ND-63038| ND-630516| ND-630716| ND-630916
---|---|---|---|---|---|---|---|---
DRIVER SIZE| 11/32″ (8.7 mm)| 1/2″ (12.7 mm)| 1/4″ (6.4 mm)| 3/16″ (4.8 mm)| 3/8″ (9.5 mm)| 5/16″ (7.9 mm)| 7/16″ (11.1 mm)| 9/16″ (14.29 mm)
COLOR CODE| Green| Red| Red| Black| Blue| Yellow| Brown| Orange
QR CODE| | | | | | | |

7 Piece Nut Driver Set – ND-631

https://uqr.to/nrng

Jonard’s Nut Drivers have a full length hollow shaft, making them a great tool to use on stacked circuit boards and long bolts/studs.

• Ergonomically designed handle with thermoplastic rubberized grip for greater comfort and torque

Kit includes:

• ND-63012 1/2″ Hollow Nut Driver, 3″ Shaft
• ND-63014 1/4” Hollow Nut Driver, 3” Shaft
• ND-63038 3/8″ Hollow Nut Driver, 3″ Shaft
• ND-630316 3/16” Hollow Nut Driver, 3” Shaft
• ND-630516 5/16″ Hollow Nut Driver, 3″ Shaft
• ND-630716 7/16″ Hollow Nut Driver, 3″ Shaft
• ND-6301132 11/32” Hollow Nut Driver, 3” Shaft

4-in-1 Mini All-Purpose Screwdriver (Pack of 10) – S-41/10
This is a mini multi-bit screwdriver made for everyday use and includes four head types (#0 & #00 Phillips head and 1/8″ & 1/16″ Cabinet slotted head).

https://uqr.to/wlls

6-in-1 Robertson Screwdriver – SD-1223
The Jonard Tools 6-in-1 Multi-Bit Robertson Screwdriver eliminates the need for multiple tools in your belt. This tool can be configured to 6 types of driving heads.
Overall Length: 7 1/2″ (190 mm)
Kit includes: SD-RB1 Phillips Bit #1 Slot 3/16″, SD-RB3 Replacement Bit S1 & S2

https://uqr.to/nrn2

6-in-1 Multi-Bit Screwdriver w/ Phillips & Slotted Bits – SD-61
The Jonard Tools 6-in-1 Multi-Bit Screwdriver eliminates the need for multiple tools in your belt. This tool can be configured to 6 types of driving heads.
Kit includes: SD-RB1 Phillips Bit #1 Slot 3/16″, SD-RB2 Phillips Bit #2
Slot 9/32″; SD-RB12 Replacement Bit Set includes: SD-RB1 & SD-RB2

https://uqr.to/nrn1

Phillips #00 & Cabinet-Tip Slotted Precision Screwdriver Set – SDKP-2
Includes:

• SD-00 Phillips Precision Screwdriver, #00 x 60 mm
• SD-080 Cabinet Slotted Precision Screwdriver, 2 mm x 60 mm

https://uqr.to/s6gl

Precision Screwdriver Phillips #00 x 60mm (Pack of 10) – SD-00/10
This Precision Screwdriver has a #00 Phillips tip and a 3 mm diameter by 60 mm long shaft. Shaft is made from SU11 steel. The handle is made from polypropylene and thermoplastic rubber for added comfort with a swivel at the end for ease of use. Overall tool length is 6″ (152 mm).Tips are magnetic.

https://uqr.to/nrmx

Precision Screwdriver Slotted 2mm x 60mm (Pack of 10) – SD-080/10
This Precision Screwdriver has a slotted tip 2 mm wide and a 3 mm diameter by 60 mm long shaft. Shaft is made from SU11 steel. The handle is made from polypropylene and thermoplastic rubber for addedcomfort with a swivel at the end for ease of use. Overall tool length is 6″ (152 mm). Tips are magnetic.

https://uqr.to/nrmy

2 Piece Stubby Screwdriver Set – SDS-142
Jonard’s Stubby Cushion Gripped Screwdrivers are made with an S2 steel shank with a chrome finish for exceptional strength and long life.
Overall Length: 3 1/2″ (89 mm) each
Kit includes: SDSP-2 Phillips Screwdriver, #2 X 1.5″ & SDSC-14 Cabinet Slotted Stubby Screwdriver, 1/4″ x 1.5″

https://uqr.to/nrne

Slotted Screwdrivers
Jonard’s Keystone Slotted Screwdrivers are made with an S2 steel shank and a chrome finish for exceptional strength and long life.

SPECS| SDC-3163| SDC-3166| SDC-144| SDC-3810| SDC-5166
---|---|---|---|---|---
SHAFT| 3/16″ x 3″| 3/16″ x 6″| 1/4″ x 4″| 3/8″ x 10″| 5/16″ X 6″
OVERALL LENGTH| 6 3/4″

(171 mm)

| 9 3/4″

(248 mm)

| 8 11/32″

(212 mm)

| 14 3/8″

(365 mm)

| 10 3/8″

(264 mm)

QR CODE| | | | |

Phillips Screwdrivers
Jonard’s Phillips Screwdrivers are made with an S2 steel shank with a chrome finish for exceptional strength and long life.

(305 mm)
QR CODE|

https://uqr.to/nrn8

| | |

Robertson Screwdrivers
Jonard’s Robertson Screwdrivers are made with an S2 steel shank with a chrome finish for exceptional strength and long life.

8 Piece Screwdriver Set – SDK-8

****https://uqr.to/nrnf

Made of special alloy steel for exceptional strength and long life.
The shafts are corrosion resistant and the soft rubber handles offer user comfort with greater torque. The tips are magnetic and the size and style are marked on the end of each handle.

Kit includes:

• SDP-1 Screwdriver Phillips #1 x 3″
• SDP-2 Screwdriver Phillips #2 x 4″
• SDP-3 Screwdriver Phillips #3 x 6″
• SDSP-2 Screwdriver Phillips #2 Stubby
• SDSC-14 Screwdriver Slotted 1/4″ Stubby
• SDC-144 Screwdriver Slotted 1/4″ x 4″
• SDC-3163 Screwdriver Slotted 3/16″ x 3″
• SDC-5166 Screwdriver Slotted 5/16″ x 6″

Phillips Screwdriver, #3 x 24″ – SD-243

https://uqr.to/nrn0

Designed to reach diodes in the back of rectifiers, this 24″ extra long #3 Phillips Screwdriver is made with a chrome vanadium steel shank and a matte finish for exceptional strength and long life.
Overall Length: 27″ (685 mm)

Cabinet Slotted Screwdriver, Fiber ONT (Pack of 10) – SD-63/10

https://uqr.to/nrmz

Designed for terminating battery backup wires in Optical Network Terminals (ONT), this screwdriver is the perfect tool for terminating battery backup sensor wires as well as many other applications.
Overall Length: 4″ (101 mm) Copper COAX & Network Cable Cutter – JIC-625

https://uqr.to/nrkx

Jonard’s cable cutters are made of Chrome Vanadium Steel and are heat treated for maximum strength and durability.

• Ideally used for soft copper coax and network cables and able tocut solid, stranded, and flexible cables up to 6 AWG

Jaw Thickness: 0.4″ (10.2 mm), Overall Length: 6″ (16.51 cm)

COAX Cable Cutter Steel – JIC-725

https://uqr.to/nrky

A plier designed specifically for coax cables with a steel center conductor. This plier has been tested (over 25,000 cuts) on cables with steel centers, and specifically CCSC (copper clad steel center) conductor cables without degradation to the cutting blades.
Plier will also cut many other cable types.
Jaw Thickness: 1/4″ (6.35 mm), Overall Length: 6 1/4″ (158.75 mm)

3/4″ COAX Cable Cutter – JIC-750

https://uqr.to/nrkz

Designed to cleanly cut up to 3/4″ hard line coaxial cable and larger fiber cables without compressed or frayed ends.

• Eliminates cable distortion during prep by functioning like a tube cutter
• Ergonomically designed handle with dipped plastic grip for greater comfort and torque

High Leverage Diagonal Cutting Pliers, 8″ – JIC-2288

https://uqr.to/nrlt

Crafted for heavy-duty wire cutting and use for the most demanding applications, precision machined cutting edges provide exceptionally smooth action.
Jaw Length: 7/8″ (22.2 mm), Overall Length: 8 1/4″ (210 mm)

High Leverage Diagonal Cutting Pliers, Angled Head, 8″ – JIC-2488

https://uqr.to/nrlu

Crafted with a 13° angled head for heavy-duty wire cutting in confinedspaces. Use for the most demanding applications, precision machinedcutting edges provide exceptionally smooth action.
Jaw Length: 13/16″ (20.6 mm), Overall Length: 8″ (203 mm)

Telecom Diagonal Cutting Pliers, 6 1/4″ – JIC-7858

https://uqr.to/nrlv

Tapered nose diagonal cutting pliers with standard bevel knives with .030″ and .045″ skinning holes, with crusher used for multi-purpose wire work, with two V-shaped stripping notches.
Jaw Length: 7/8″ (22.2 mm), Overall Length: 6 1/4″ (158 mm)

Diagonal Tapered Nose Cutting Pliers, 6 1/4″ – JIC-600

https://uqr.to/nrlw

Tapered nose diagonal cutting pliers with standard bevel knives.
Includes crusher for multi-purpose wire work. The handles are 6 1/4″ long. Made to exceed ASME/ANSI standards.
Jaw Length: 7/8″ (22.2 mm), Overall Length: 6 1/4″ (158 mm)

Diagonal Crushing Slitting Pliers – DIABVNOTCH

https://uqr.to/nrlz

Used for cutting soft copper conductors. Has a “V” shaped notch between jaws, near the joint, for crushing the flameproof type of insulation on distributing frame wire. Also provides a “W” shaped notch on the pliers jaws for slitting textile insulation.
Jaw Length: 3/4″ (19.1 mm), Overall Length: 5 1/8″ (130 mm)

Diagonal General Use Pliers – DIAGB5

https://uqr.to/nrm0

These are plain diagonal pliers for general use, including cutting soft copper conductors.
Jaw Length: 3/4″ (19.1 mm), Overall Length: 5 1/8″ (130 mm)

Diagonal Stripping Pliers – DIAGB6

https://uqr.to/nrlx

Tapered nose diagonal cutting pliers with standard bevel knives with one .045” hole, crusher used for multipurpose wire work, and two V shaped stripping notches.
Jaw Length: 7/8″ (22.2 mm), Overall Length: 6 1/2” (158 mm)

Flush Cut Pliers – JIC-2755

https://uqr.to/nrm2

Made of high carbon steel, this lightweight flush cutter can be used on wire up to 18 AWG while minimizing fly-off. Cantilevered spring automatically opens the plier, and the head fits easily in confined work areas.
Jaw Length: 1/2″ (12.7 mm), Overall Length: 5″ (127 mm)

Semi-Flush Cut Pliers – JIC-453

https://uqr.to/nrm1

A close cutting pliers used to trim conductors from the 710 connector modules without leaving exposed conductors. Ideal for close trimming of gates and sprue on injection molded plastic parts. Jaw design aids inuse in confined areas.
Jaw Length: 5/8″ (15.9 mm), Overall Length: 4 1/2″ (114 mm)

9″ Curved Jaw Cable Cutter – JIC-63020

https://uqr.to/nrm6

High leverage design for superior cutting ability. The curved jaws provide superior holding for a cleaner and more concentric cut. Tool is for cutting aluminum and soft copper and not for use on steel or ACSR type cables. The shear type jaws cuts up to 100-pair cables (24 AWG). Lock has a unique feature where lock is released by squeezing handles together. Jaw Length: 1″ (25.4 mm), Overall Length: 9″ (228 mm)

High Leverage Cable Cutter – JIC-63050

https://uqr.to/nrm7

High leverage design for superior cutting ability. Designed with a shear-type jaw for cutting aluminum and soft copper. Not for use on steel or ACSR type cables. Cuts up to 100-pair cables (24 AWG).
Jaw Length: 1 3/8″ (34.93 mm), Overall Length: 9 1/4″ (234 mm)

Lineman’s Side Cut Pliers – JIC-683

https://uqr.to/nrm3

Designed for heavy duty use in construction and maintenance work.
These pliers are high leverage for cutting bolts, nails, and many gauges of wire including high-strength wire. Cutting edges cut clean and remain sharp. The cushioned-grip, comfortable handles are approximately .007″.
Cutter Length: 13/16″ (20.64 mm), Overall Length: 9 1/2″ (241 mm)

Lineman’s Pliers w/ Fish Tape Puller & Crimper – JIC-685

https://uqr.to/nrm4

Designed for heavy duty use in construction and maintenance work.
These pliers are high leverage for cutting bolts, nails, and many gauges of wire including high-strength wire. Fish tape pulling feature easily pulls 1/8″ or 1/4″ steel fish tape without damaging the tape. Built in crimper featureworks best on non-insulated connectors, lugs and terminals. Cushioned grip,comfortable handles are coated to approximately .007″.

Connector-Crimper Pliers – JIC-891

https://uqr.to/nrm8

Connector-Crimping Pliers with Side Cutters designed to press UG, UR, UY, 709 series connectors, crimping “B” type connectors, and AMP tel splice connectors. A special stop behind cut out prevents damage to connectors.
Utilized on combinations of plastic and pulp insulated 19, 22, 24 and 26 gaugecopper conductors as well as 20 gauge plastic insulated copper steel wire.
Jaw Length: 1″ (25.4 mm), Overall Length: 5 3/16″ (131 mm)

Long Nose Switchboard Pliers – JIC-203

https://uqr.to/nrm9

Pliers are for general use looping, bending and cutting. Grips small wires and parts and reaches into tight spaces. Jaws are knurled, serrated and have side cutting blades. Two stripping holes for 19 and 22 AWG wire. Cushion gripped handles.
Overall Length: 6 7/8″ (174 mm)

Telecom Long Nose Pliers – JIC-21257

https://uqr.to/nrma

This Long nose pliers has side cutting blades, a crushing slot, one .030″ stripping hole, and a thin knurled nose to facilitate handling of the wire at the central office terminals. The comfortable handles are cushion gripped.
Jaw Length: 1 7/8″ (47.63 mm), Overall Length: 6 7/8″ (174 mm)

Combo Crimper, Long Nose Pliers – JIC-22148

https://uqr.to/nrmb

Five tools in one. Combines the functionality of a long nose plier with a crimper, stripper, cutter, and crusher. Crimper works for UR/UY/UG, AMP tel splice connectors, 709 series connectors, and crimping “B” type connectors. Stripping hole is .030”.
Jaw Length: 1 7/8″ (47.63 mm), Overall Length: 6 7/8″ (174 mm)

Curved Long Nose Pliers – JIC-3026

https://uqr.to/nrmc

Nose is bent 70° for maximum visibility. Used in confined areas. Design includes knurled jaws for sure wrapping and looping. Comfortable ergonomic plastic handles.
Jaw Length: 2″ (50.80 mm), Overall Length: 6 7/8″ (174 mm)

Long Nose and Side Cutting Pliers – JIC-842

https://uqr.to/nrmd

Pliers are for general use looping, bending and cutting. Grips small wires and parts and reaches into tight spaces. Jaws are knurled, serrated and have side cutting blades. Cushion gripped handle.
Jaw Length: 1 7/8″ (47.63 mm), Overall Length: 6 3/4″ (171 mm)

Long Nose General Use Pliers – BLONGNOSE

https://uqr.to/nrmf

Chain nose pliers for general use. Inner surface of the jaws are knurled near the end to facilitate gripping wire, binding post nuts etc.
Cushion gripped handle.
Jaw Length: 2″ (50.8 mm), Overall Length: 6 7/8″ (174 mm)

Long Nose Gripping Pressing Pliers – ELONGNOSE

https://uqr.to/nrmg

Long nose pliers for gripping and pressing. Inner surface of the jaws are knurled near the end to facilitate gripping wire, binding post nuts etc. Aluminum oxide insulation coating on the outside nose surface.
The inside gripping jaws are provided with mated grooves near the joint for use in pressing .032/.035″ brass sleeves. One stripping hole .054″ diameter.
Jaw Length: 1 7/8″ (47.63 mm), Overall Length: 6 7/8″ (174 mm)

Short Nose B Type Plier – BSHORTNOSE

https://uqr.to/nrmh

Intended for use in skinning 22-24 AWG wire and crushing insulation in nose slot. The front portion of the jaws is narrowed, and a portion of the inner face of one jaw is relieved to skin insulation from wire.
The inner surface of the jaws are serrated to facilitate gripping wire.
Jaw Length: 1 1/2″ (38.10 mm), Overall Length: 6 1/2″ (165 mm)

L3 Type Cut Crush Strip Pliers – KS21257L3

https://uqr.to/nrmj

Long nose with side cutter, crushing slot, one 0.03″ stripping hole and a thin knurled nose to facilitate handling wire at the terminals.
Jaw Length: 1 1/2″ (38.1 mm), Overall Length: 6 1/2″ (165 mm)

Heat Coil Pliers – PLS-5

https://uqr.to/nrmi

Designed for installing and extracting heat coils, fuses and other cylindrical shaped components. The thin nosed jaw allows easy access to tight restricted areas.
Jaw Length: 1 13/16″ (46 mm), Overall Length: 5″ (127 mm)

Slip Joint Side Cut Pliers – BCOMB

https://uqr.to/nrmm

For heavy-duty use. Black phosphate finish, machined gripping teeth and 3/8” hardened wire cutter. Cushion gripped handle.
Number of Positions: 2, Overall Length: 7 5/8″ (194 mm)

Curved Needle Nose Pliers – JIC-3385

https://uqr.to/nrml

Pump Pliers
Manufactured with a secure tongue and groove design for a non-slip grip (even under heavy pressure). Made from high quality tool steel, with a smooth positive interlock between halves.

Pump Plier 12″, 7 Positions
MAX JAW OPENING| 1″ (25.4 mm)| 1 3/4″ (44.5 mm)| 2 1/4″ (57.2 mm)
LENGTH| 6″ (152 mm)| 10″ (254 mm)| 12″ (305 mm)
QR CODE|

https://uqr.to/nrmp

|

https://uqr.to/nrmq

|

https://uqr.to/nrmr

Tabbing Shears – TS-850

https://uqr.to/nrmk

Jonard’s Tabbing Shears are made of chrome vanadium steel and are heat treated for maximum strength and durability. These tabbing shears feature the following:

• Precision ground cutting blades for easier cutting

Overall Length: 8 1/2″ (216 mm)

Fuse Puller – FP-600

https://uqr.to/nrmn

Designed for installing and extracting fuses from line amplifiers and other cylindrical shaped components including heat coils. The thin nosed jaws allow for easy access to tight restricted areas. Works great on automotive mini fuses that are packed tight. Handle is cushion gripped.
Jaw Length: 1 13/16″ (46 mm), Overall Length: 5″ (127 mm)

Wire Rope and Cable Cutter – WRC-14

https://uqr.to/nrmn

The Jonard Tools WRC-14 Wire Rope & Cable Cutter is ideal for cutting soft and hard wire rope, spring wire, and copper/aluminum cable.

Material
Soft Wire Rope
Hard Wire Rope
Spring Wire
Copper/Aluminum Cable

Max. Wire Rope Size
1/4″ (6 mm)
3/16″ (5 mm)
3/32″ (2.4 mm)
3/16″ (5 mm)

Ratcheting Cable Cutter – RC-336ACSR

https://uqr.to/nrg1

Designed for heavy-duty use, this cable cutter is designed to cut 336 MCM (170 mm²) ACSR, 400 MCM (202 mm²) copper, or 600 MCM (304 mm²) aluminum cables, and most cables up to 30 mm in diameter.
Maximum Cut Capacity: 1 3/4″ (4.4 cm), Overall Length: 12″ (30.5 cm)

Ratcheting Cable Cutters – RC-500 & RC-600

https://uqr.to/zbp8https://uqr.to/nrmo

These Ratcheting Cable Cutters are designed to cleanly cut copper and aluminum power cables and other similarly sized multi-conductor cables.

• Made of heat-treated carbon steel with induction-hardened cutting edges for maximum strength and durability
• Unique design allows you to hold and cut cables quickly and easily
• Spring-loaded mechanism on handles for automatic opening
• Ergonomically designed handle with cushioned rubber grip for greater comfort and leverage
• This cable cutter is not designed for use on ACSR or other steel cables

Self Adjusting Wire Stripping Tools
The perfect solution for stripping PVC and other insulated wire. This innovative squeeze and strip design uses precision carbon steel laminated stripping blades that automatically grasp the insulation to provide quick and accurate wire stripping.

CableSaber™ Armored Strip & Ring – AST-200

https://uqr.to/swo5

The award winning CableSaber™ is the ultimate tool for gaining midspan access to armored or thick jacketed cables 4 mm-28.6 mm (0.157″ – 1.125″) in diameter.
Replacement Blades (Pack of 2): AST-200RB

CableSaber+™ Armored Cable & Fiber Duct Slitter – AST-210

https://uqr.to/1cssp

The Jonard Tools CableSaber+™ is the ultimate tool for gaining mid-span access to armored or thick jacketed cables 4 mm-30.0 mm (0.157″ – 1.181″) in diameter, such as Corning’s 1728 RocketRibbon cable.

Cable Ring Tool – JIC-2060

https://uqr.to/nro4

Designed to ring and remove the sheathing off plastic, fabric, and rubber- covered cables from 3/16″ – 1/2″ (4.7 mm-12.7 mm) in diameter.
Replacement Blades (Pack of 6): RB-2060/6

Round Cable Strip & Ring Tools
The PATENTED CST-1900 and CST-4000 Round Cable Strip & Ring Tools are designed for fast and precise removal of cable jackets from round cables. Triple action design makes longitudinal cuts for end stripping, spiral cuts for end and mid span stripping, and circular cuts for jacket removal.

mm-40 mm)
QR CODE|

https://uqr.to/nro2

|

https://uqr.to/nrf2

Ratcheting Duct and Cable Slitters
These ratcheting cable slitters are designed to dismantle heavy-duty cables. The RCS-25 and RCS-30 both slit and ring round cables greater than 1″ (25 mm) in diameter, and the RCS-30 can also be used to make window cuts in ducts up to 5 mm thick.

https://uqr.to/nrg2

|

https://uqr.to/swo8

Wire Stripper and Cutter, 8-22 AWG – WS-822

https://uqr.to/nrgu

Easily strips 8-20 AWG solid wire and 8-22 AWG stranded wire, can remove up to 1″ of insulation in a one-step operation. Built-in cuttingblades make it easy and convenient to cut and prep wire. Gripping and stripping jaws grab, hold, and strip wire with one squeeze of thehandle.

Adjustable Wire Stripper & Cutter – WS-5

https://uqr.to/nrot

Designed with a precision-ground “V” notch blade and adjustable blade stop for superior stripping, this adjustable wire stripper and cutter is perfect for stripping and cutting 10-30 AWG (2.6-0.25 mm) solid and stranded wire.

Compact BNC Connector Tool – RBNC-3

https://uqr.to/nrg0

Designed to provide easy access to BNC connectors, this 2.25″ BNC Connector Tool is perfect for installing or removing BNC connectors in high-density locations. This tool features the following:

• Compact design allows you to reach connectors in hard-to-reach places
• Knurled handle provides a secure grip while using the tool
• Steel loop can easily attach to a carabiner or key ring

Connector Tools
The RBNC-12 is designed to install or remove BNC connectors in high density locations. The RF-12 and RF-18 perform the same function but for F connectors and feature an insertion device on the back of the handle to aid in making connections.

• Ergonomically designed handle provides increased comfort and leverage
• Made from high-quality materials for maximum durability and long life

https://uqr.to/nrl2

https://uqr.to/nrl2https://uqr.to/nrl3

RNBC-12 – 12″ long
RF-12 – 12″ long
RF-18 – 18″ long

Low Torque Termination Tool – TT-812

https://uqr.to/nrk8

Designed to tighten F connectors, this PATENTED indoor torque tool is perfect for connecting COAX connectors to consumer electronic devices with the proper amount of torque every time.

• Small and compact for getting into tight spaces: 1 3/8″ tall and 7/8″ diameter
• Helps prevent signal loss, ingress / egress

Security Shield Tools
SST-716 Security Shield Tool 7/16″ & SST-716AT Security Shield

https://uqr.to/nrl6

Tool Water Tight are used with 7/16″ hex shielded F connectors. Designincludes extended 7/16″ shank for ease of use with Torque Wrenches in security shield applications. Black oxide finish. Knurled handle for secure gripping and includes a steel loop for turning leverage and carrying.

https://uqr.to/nrl6

SST-916 is designed to be used on 9/16″ hex shielded F connectors (RG11), this security shield tool is perfect for use with torque wrenchesto lock security shields onto connectors. Knurled handle for secure gripping. Steel loop included for better leverage and easy storage. Shaft length 1.625″.

****https://uqr.to/nrl6

Cyclops Wire Stripper – CST-1i

https://uqr.to/nro3

Fast easy removal of outer insulation from all unshielded twisted pair, shielded twisted pair and multicore cables.
The Cyclops features a self adjusting blade and is perfect for PVC and plenum type insulation, plus other materials without damaging the inner braids, foils or conductors.
Cable performance is not impacted using this cable stripper. PATENTED

Submariner Cable & Large Duct Slitter – RCS-50
Designed to open the toughest heavy-duty cable jackets, the RCS-50 is perfect for performing lateral and longitudinal cuts on submariner cables, large fiber ducts, or large count telephone cables at least 1 1/2″ (3.81 cm) in diameter.
Includes the H-20 rugged carrying case.

https://uqr.to/nrg3

Cable Stripper for 14/2 & 12/2 NM Cable – WSC-1412
Designed to strip the jacket and insulated conductors from 12/2 and 14/2 NM cables. Includes stripping holes for removing insulation on 12 and 14 AWG wire, wire looping / bending holes to aid in wire prep, and shears 6-32, 8-32, 10-32 screws.

https://uqr.to/swod

Wire Stripper & Crimper, 8-26 AWG – WSC-826
The Jonard Tools WSC-826 is a multi-function wire stripper designed to cut and strip wire from 8-26 AWG (3.26 mm-0.40 mm) without any adjustments needed.

https://uqr.to/nrgv

Fiber Optic Strippers
The Jonard fiber optic strippers use preset factory settings so no adjustments are required. This unique design eliminates human error and prevents nicks or scratches from occurring on the optical fibers. Our fiber optic strippers feature the following:

• These tools are made of strong high carbon steel and the blades are ground and hardened for higher durability and longer life
• Ergonomic handle is made of TPR (thermoplastic rubber) for greater comfort
• JIC-125 and JIC-175 strips the 250 micron coating down to expose the 125 micron optical fiber
• JIC-180C strips the 180 micron coating down to expose the 125 micron optical fiber
• JIC-275 strips the 600-900 micron buffer coating, and 250 micron coating to expose the 125 micron glass fiber
• JIC-375 strips the 1.6 mm-3 mm fiber jacket, 600-900 micron buffer coating, and 250 micron coating to expose the 125 micron glass fiber

SPECS| JIC-125| JIC-175| JIC-180C| JIC-275| JIC-375
---|---|---|---|---|---
DESCRIPTION| Compact Fiber Optic Stripper, 250 micron| Ergonomic Fiber Optic Stripper, 250 micron| Ergonomic Fiber Optic Stripper, 180 micron| Fiber Optic Stripper, Two Hole| Fiber Optic Stripper Three Hole
STRIP DIAMETER| 250 micron| 250 micron| 180 micron| 250 micron,
600-900 micron| 250 micron, 900 micron,

1.6-3.0 mm

NUMBER OF STRIPPING HOLES| 1| 1| 1| 2| 3
QR CODE|

<https://uqr.to/nrfo>

|

<https://uqr.to/nrfp>

|

<https://uqr.to/vc6b>

|

<https://uqr.to/rbzk>

|

<https://uqr.to/nrfs>  

Wire Strippers
Wire strippers and cutters with coil spring openings to reduce fatigue, wire looping and bending holes, black oxide finish, locking mechanism, and cutting surfaces that are hardened, tempered and ground for superior performance.

(2.60-0.64 mm)

| 16-26 AWG

(1.29-0.40 mm)

| 20-30 AWG

(0.81-0.25 mm)

QR CODE| https://uqr.to/nrou| https://uqr.to/nrov| https://uqr.to/nrow

Buffer Tube Ringer (up to 6 mm) – BTR-6 The Jonard Tools BTR-6 Buffer Tube Ring tool provides quick access to fibers inside buffer tubes up to 6 mm in diameter and will work withbuffer tubes with wall thicknesses up to 1 mm. The tool is light and durable with a hardened steel blade for long life and includes a hole for tethering.

https://uqr.to/nrev

Fiber Slit & Ring Tool for EZ!Fuse™ SC & LC Splice-On Connectors – EZSR-23
The EZSR-23 Fiber Slit & Ring Tool has been specially designed to prepare 2 mm and 3 mm fiber optic cables for connecting with Fitel EZ!Fuse™ SC & LC Splice-On Connectors. This tool saves time and makes the connecting process extremely easy by having a  ringing dial and slitting channel with preset lengths.

https://uqr.to/qzon

Fiber Drop Cable Strippers
Designed to strip FTTH drop cables, these drop cable strippers strip the outer jacket of drop cables and cuts the strength members to expose the fiber inside.

• Works on cables with FRP or steel strength members
• Removes the outer jacket without damaging or nicking the fiber
• Fiber support is scaled to help determine strip length

FDS-216 – Strips FTTH drop cables sized 1.6 mm by 2.0 mm
FDS-312 – Strips FTTH drop cables sized 3.1 mm by 2.0 mm

|
---|---
https://uqr.to/1l5s0| https://uqr.to/nrfj

Fiber Optic Drop Cable Slitter – FOD-2000

The Jonard Tools PATENTED and award-winning FOD-2000 Fiber Optic Drop Cable Slitter simplifies the slitting of drop cable jackets at mid span or end sections and is perfect for FTTH technicians working with flat fiber drop cables
Replacement Blades (Pack of 25): FOD-RB25

https://uqr.to/nrgz-1

Fiber Optic Round Cable Slitter – FOR-3000
The Jonard Tools FOR-3000 Round Cable Slitter is designed to easily and safely open round fiber optic cable jackets from 9 mm to 19 mm in diameter. It is ideal for any FTTH or maintenance technician that needs to work with round fiber optic cables, whether mid span or end-run.
Replacement Blade: FOR-3000RB1

https://uqr.to/nrfm

Wire & Kevlar® Cutting Shears – JIC-186
The Jonard Tools JIC-186 Wire and Kevlar® Cutting Shears are designed to cut Kevlar® , cabling insulation, tape, cable ties, and other materials with ease. These cutting shears feature the following:
High carbon stainless steel blades are heat-treated to HRC 58-60 for longer life and durability

https://uqr.to/nrh8

Flush Cut Kevlar® Cutters – JIC-190
The Jonard Tools JIC-190 Flush Cut Kevlar® Cutters are designed to cut Kevlar® , cabling insulation, tape, cable ties, and other materials flush to the surface.
Spring-loaded TPR (thermoplastic rubber) handles return to the open position for enhanced ergonomics and reduced hand fatigue

https://uqr.to/nrfq

Slit & Ring Tools – JIC-4366 & JIC-4377The JIC-4366 Cable Slit & Ring Tool and the JIC-4377 Fiber Jacket Slit & Ring Tool are used as cable sheath and jacket slitters. Both toolshave a ringing blade under the back handle and come with one spare ringing blade and one spare slitting blade. The JIC-4377 has a shorterL-shaped steel guide along the slitting blade allowing you to slit the OFS Minicord EZ-Bend and other similar cables.
Replacement Blades for Ring Cut (Pack of 6): RB-2060/6
Replacement Blades for Slit Cut (Pack of 6): RB-2878/6

|
---|---
https://uqr.to/nrh6| https://uqr.to/nrh7

Riser Slitting Tool – RST-8514
Designed to shave a longitudinal access window in round FTTH riser cables and microducts for mid-span access. This riser slitting tool is perfect for making access windows on cables 8-14 mm (0.33″ to 0.55″ ) in diameter without damaging the fiber inside.
Replacement Blades (Pack of 25): RST-RB25

https://uqr.to/nrh0

Rollable Ribbon Fiber Separator – RFS-100
Designed for use on Rollable or Spyder type ribbon fiber optic cables, this tool is perfect for separating the matrix of fibers in ribbon fiber optic cables quickly and easily.

https://uqr.to/qzoo

Crimper w/ Fiber Optic Die – UC-8039
Designed for use with FC, ST, SC, LC, SMA, and MT-RJ connectors, this crimper is the perfect tool for crimping fiber optic connector collars.
Kit includes :
Universal Crimper Without Die
UC-8000
Fiber Optic Crimping Die
UCD-2685

https://uqr.to/nrhb

Mid Span Slitters
These PATENTED tools are designed to open fiber jackets and loose buffer tubes to provide easy fiber access. The buffer tube slitting is done without damage to the fiber. Blades are replaceable.
Simple to use:

• Select the correct groove. Grooves marked with the recommended fiber size
• Place the fiber in the groove to be used
• NOTE: The arrow on the top of the tool indicates the pulling direction and the line indicates the blade location
• Close the tool making sure lock is engaged and pull to slit the fiber
• For ring operation repeat steps above and, instead of pulling, rotate the tool 3-6 times to ring the cable

SPECS| MS-6| MS-26| MS-306|

MS-316

---|---|---|---|---
DESCRIPTION| Mid Span Slitter (1.2 mm-3.3 mm)| Large Mid Span Slitter (2.9 mm-6.8 mm)| Mid Span Slit & Ring Tool (1.2 mm-3.3 mm)| Mid Span Slit & Ring Tool (2.9 mm-6.8 mm)
NO. OF PRECISION GROOVES| 6 (Slitting Only)| 5 (Slitting Only)| 12 (6 Slitting, 6 Ringing)| 10 (5 Slitting, 5 Ringing)
GROOVE SIZES (MM)| 1.2-1.5, 1.5-1.8, 1.8-2.1,

2.1-2.5, 2.5-2.9, 2.9-3.3

| 2.9-3.6, 3.6-4.4, 4.4-5.2,

5.2-6.0, 6.0-6.8

| 1.2-1.5, 1.5-1.8, 1.8-2.1,

2.1-2.5, 2.5-2.9, 2.9-3.3

| 2.9-3.6, 3.6-4.4, 4.4-5.2,

5.2-6.0, 6.0-6.8

REPLACEMENT CARTRIDGE| MSB-1533| MSB-2968| MS-306RB| MS-316RB
QR CODE| https://uqr.to/nrh1| https://uqr.to/nrh2| https://uqr.to/nrh3| https://uqr.to/nrh4

SPECS

| MS-326| MS-336|

MS-426

| MS-446
---|---|---|---|---
DESCRIPTION| Micro Duct Fiber Cable Slit & Ring Tool (5 mm-10 mm)| Mid Span Slit & Ring Tool (7.9 mm-11.0 mm)| Mid Span Slit & Ring Tool (5.8 mm-12 mm)| Mid Span Slit & Ring Tool (8.7 mm-14.6 mm)
NO. OF PRECISION GROOVES| 10 (5 Slitting, 5 Ringing)| 4 (2 Slitting, 2 Ringing)| 8 (4 Slitting, 4 Ringing)| 8 (4 Slitting, 4 Ringing)
GROOVE SIZES (MM)| 5.0-5.6, 6.0-6.6, 7.2-7.8,

7.8-8.4, 9.4-10

| 7.9-8.2, 10.7-11.0| 5.8-6.4, 7.8-8.4, 9.8-10.4,

11.2-12

| 8.7-9.1, 9.5-9.9, 11.8-12.2,

14.2-14.6

REPLACEMENT CARTRIDGE

| MSB-5010| MS-336RB| MS-426RB|

MS-446RB

QR CODE| https://uqr.to/nrh5| https://uqr.to/nrfv| https://uqr.to/nrfw| https://uqr.to/ybjo
SPECS| MS-526| MS-600| MS-836|

MS-ROC

---|---|---|---|---
DESCRIPTION| Mid Span Slit & Ring Tool (10.2 mm-18.2 mm)| Mid Span Shaver (1.0 mm-3.3 mm)| Mid Span Slit & Ring Tool for RocketRibbon® Cable (11.6 mm-22.6 mm)| ROC Drop Cable Slitter, Fiber Access Tool (4.2 mm-5.5 mm)
NO. OF PRECISION GROOVES| 8 (4 Slitting, 4 Ringing)| 6 (Slitting Only)| 8 (4 Slitting, 4 Ringing)| (2) Shave
GROOVE SIZES (MM)| 9.8-10.2, 11.8-12.2,

15.4-15.8, 17.8-18.2

| 1.0-1.4, 1.4-1.8, 1.8-2.1,

2.1-2.5, 2.5-2.9, 2.9-3.3

| 11.6-12.0, 14.5-14.9,

16.8-17.2, 22.2-22.6

| 4.2, 5.5
REPLACEMENT CARTRIDGE| MS-526RB| MS-600RB| MS-836RB| MS-ROCRB
QR CODE| https://uqr.to/nrfx| https://uqr.to/1bwez| https://uqr.to/1h384| https://uqr.to/1lr4o

Microduct Scoring Tools, 5-16 mm
The Jonard Tools Microduct Scoring Tools are perfect for scoring and ringing fiber optic microducts without damaging the fibers inside.
FS-1080 – For scoring & ringing 10/8 and 12/10 fiber optic microducts

https://uqr.to/qzop

• For 1.0 mm-1.3 mm ducts

Replacement Blade Cartridge: FS-1080RB
FS-1416 – For scoring & ringing 14/10 and 16/10 fiber optic microducts

https://uqr.to/qzot

• For 1.3 mm-3.0 mm thick ducts

Replacement Blade Cartridge: FS-1416RB
FS-2025 – For scoring & ringing 14/10 and 16/10 fiber optic microducts

• For 2.0 mm-2.5 mm thick ducts

Replacement Blade Cartridge: FS-2025RB

https://uqr.to/qzot

Microduct Tube Cutter – MDC-14
Designed to cut microducts cleanly and straight, this microduct cutter is perfect for cutting most microducts including tubing made from PVC, Nylon, and other materials up to 14 mm (9/16″) in diameter.

https://uqr.to/nrh9

Microduct Cutter – MDC-28
Designed to create quick, clean, and straight cuts in fiber ducts up to 28 mm, this duct cutter is perfect for cutting PVC, CPVC, HDPE, and other plastic tubing.
Replacement Blade: MDC-28RB

https://uqr.to/nrfu

Large Fiber Duct Cutter – MDC-64 Designed to cut large fiber ducts up to 64 mm (2.52″) in diameter, this fiber duct cutter is perfect for cutting PVC, CPVC, PE, HDPE, PEX and other nonmetallic tubing. Length: 9.5″ (241.3 mm)
Replacement Blade: MDC-64RB

https://uqr.to/nrha-1

Large Fiber Duct Cutter w/ Extra Long Handles – MDC-125
Designed to cut large fiber ducts up to 64 mm (2.52″) in diameter, this fiber duct cutter is perfect for cutting PVC, CPVC, PE, HDPE, PEX and other nonmetallic tubing. Length: 12.5″ (31.75 cm)

https://uqr.to/1k8iu

Fiber Optic Scribe – FS-616
Designed with a 35° beveled edge and 6 mm wide carbide blade, this fiber optic scribe is the perfect tool for scribing optical fiber. This scribe features the following:

• Durable anodized aluminum housing provides a comfortable and durable grip
• Ideal for “scratch & pull” technique of scribing fiber

https://uqr.to/nrhl

Fiber Optic Power Meters and Light Sources
Jonard Tools makes fiber optic test equipment for many applications. Various adapter options are available to test all types of fiber connectors.

SPECS| FLS-50| FLS-55| FPM-50A| FPM-50S| FPM-55| FPM-70| PON-50|

PON-55

---|---|---|---|---|---|---|---|---
DESCRIPTION| Optical Light Source| Multi-mode & Single-mode Fiber Optic Light Source| Fiber Optic Power Meter| Mini Optical Power Meter, (-50 to +26dBm)| Fiber Optic Power Meter with Data Storage| Fiber Optic Power Meter| Passive Optical Network Power Meter| Passive Optical Network Power Meter
NETWORK TYPES| PC/UPC| PC/UPC| PC/UPC/APC| APC/PC/UPC| APC/PC/UPC| APC/PC/UPC| BPON/EPON/ GPON| BPON/EPON/ GPON, APC
CONNECTOR TYPES| LC, FC/SC| LC, FC/SC| FC, SC, LC| FC (APC/PC/UPC) & LC (PC/UPC)| FC, SC, LC| FC, SC, LC| FC/SC| FC/SC (APC)
WAVELENGTHS (NM)| 1310, 1550| 850, 1300, 1310, 1550| 850, 980, 1300, 1310, 1490, 1550, 1625,  1650| 850, 980, 1300, 1310, 1490, 1550, 1625, 1650| 850, 980, 1300, 1310, 1490, 1550,  1625, 1650| 850, 980, 1300, 1310, 1490, 1550, 1625,  1650| 1310, 1490, 1550| 1310, 1490, 1550
DETECTOR TYPE| N/A| N/A| InGaAs| InGaAs| InGaAs| InGaAs| InGaAs| InGaAs
MEASUREMENT RANGE| N/A| N/A| -50 dBm to +26 dBm| -50 dBm to +26 dBm| -50 dBm to +26 dBm| -70 dBm to +6 dBm| -35 dBm to +10
dBm at 1310 nm/1490 nm, -35 dBm to +20 dBm at 1550 nm| -40 dBm to +10 dBm
QR CODE| | | | | | | |

Multi-Function OTDR – OTDR-1000
Jonard Tools’ Mini Pro OTDR is the perfect all-in-one handheld device for evaluating FTTx and access network construction and maintenance, identifying fiber breakpoints, measuring cable length, and calculating relative optical power losses. This Mini Pro OTDR also features the following:

• Includes 8 different functions for testing and evaluating fiber optic and network cables
• Bright 3.5″ color LCD screen makes it quick and easy to evaluate data Rubberized hard plastic case is shock-proof and drop-proof for maximum durability
• 600 MB internal storage with MicroSD/TF card slot for additional memory
• Built-in rechargeable lithium ion battery provides power on-the-go
• Includes FC, SC, and LC (PC/UPC) OTDR adapters for fiber optic cables, downloadable software (also featured in the download section of this product page), power cord with plug adapters, alcohol wipes, and instruction manual

https://uqr.to/wr94

Optical Fiber Identifier – OFI-50 Designed to qutickly identify the direction of transmitted fiber and display the relative core power without damaging the fiber, this fiber identifier is the perfect tool for identifying fiber in network systems without disrupting the network.

https://uqr.to/nrfy

Visual Fault Locator Kits
Works on FC, SC, ST connectors and will work on LC connectors when used with the included adapter. Distance up to 5 km (3.1 miles).

VFL-150 Includes:

• VFL-25 Visual Fault Locator
• VFL-25125 FC to LC Adapter for VFL-25
• (2) AAA Batteries

VFL-300 Includes:

• VFL-25125 FC to LC Adapter
• Carrying Pouch
• (2) AAA Batteries

|
---|---

<https://uqr.to/nrhc>

|

<https://uqr.to/w3kx>  

Fiber Inspection Microscopes
Fiber inspection microscopes have a focus wheel and feature 2.5 mm and 1.25 mm adapters for use on most fiber connectors. The achromaticlens offers excellent imaging and integrated laser filters for safety (not intended for use with illuminated fibers). Coaxial illumination provides clear view of connector face and fiber.

|
---|---

<https://uqr.to/nrhd>

|

<https://uqr.to/nrhe>  

The FIM-200 has 200x magnification
The FIM-400 has 400x magnification Fiber Connector Tools The FCT-100 and FCT-200 fiber connector tools are perfect for inserting and extracting and extracting fiber connectors in high-density patch panels. The unique jaws of the tools were specially designed to easily navigate tight spaces and grasp connectors firmly without damaging them or touching any surrounding connectors.

SPECIFICATIONS

|

FCT-100

| FCT-200
---|---|---
FIBER CONNECTOR| LC, SC-Simplex, SC-Duplex, MU, MT-RJ| LC Simplex, SC Simplex, MU
QR CODE|

<https://uqr.to/nrhn>

|

<https://uqr.to/nrfg>  

Fiber Connector Cleaners
Designed to provide exceptional cleaning performance by cleaning connectors beyond the critical fiber core area and cleaning deep into the contact area of a bulkhead adapter or connectors on fiber optic cables. The tethered dust cap provides protection for the micro fiber cleaning fabric and is an adapter for connector end face cleaning.

• Features a PATENTED 360 degree Rotational Tip for extra wide cleaning
• Slide-Guide™ non-slip micro tape feeder guarantees consistent cleaning
• Dual rotational tip and one-push operation makes cleaning ferrule end-faces quick and easy
• Flip-open cap makes it easy to insert connectors for cleaning
• The FCC-120 provides 500+ cleanings and both the FCC-125 and FCC-250 provide 800+ cleanings.

SPECS| FCC-120| FCC-125|

FCC-250

---|---|---|---
DESCRIPTION| Fiber Connector Cleaner MPO| Fiber Connector Cleaner 1.25 mm| Fiber Connector Cleaner 2.5 mm
NO. OF CLEANINGS| 500+| 800+| 800+
FIBER CONNECTORS| MPO| LC| FC, SC, ST
QR CODE| | |

Fiber End-Face Ferrule Cleaners, Angled Head
Fiber End-Face Ferrule Cleaners are designed to provide exceptional cleaning performance on fiber optic connectors. They clean ferrules in recessed fiber optic adapters or individual connectors. These tools feature the following:

• FCCN-125 cleans 1.25 mm ferrules in recessed fiber optic adapters or individual LC or MU connectors.
• FCCN-250 cleans 2.5 mm ferrules in recessed fiber optic adapters or individual FC, SC, or ST connectors.
• Adjustable angled head (up to 45°) is perfect for getting into hard-to-reach places.

SPECS

| FCCN-125|

FCCN-250

---|---|---
DESCRIPTION| 1.25 µm End-Face Ferrule Cleaner| 2.50 µm End-Face Ferrule Cleaner
NO. OF CLEANINGS| 350+| 350+
FIBER CONNECTORS| LC, MU| FC, SC, ST
QR CODE| |

Universal Fiber Connector Cleaner – FCC-300
Featuring PATENT-PENDING Slide-Guide™ technology that provides stable and consistent cleaning performance, the FCC-300 Universal Fiber Connector Cleaner is the perfect tool for cleaning a large variety of fiber connectors.

https://uqr.to/nrhj

Fiber Optic Scissor Kits

JONARD P/N| DESCRIPTION| TK-325| TK-350| TK-355| TK-375
---|---|---|---|---|---
Scissor & Pouch Kit| Fiber Stripper & Kevlar® Shears Kit, Molded Pouch| Fiber Stripper & Kevlar® Shears Kit, Leather Pouch| Fiber Stripper & Scissors Kit
ES-1964| Electrician’s Scissors| | | | X
H-25| Molded Tool Pouch| X| | |
H-36| Molded 2 Pocket Tool Pouch| | | | X
H-45| Leather 2 Pocket Tool Pouch| | | X|
H-60| Molded 2 Pocket Tool Pouch| | X| |
JIC-186| Wire & Kevlar® Cutting Shears| X| X| X|
JIC-375| Fiber Optic Stripper, Three Hole| | X| X| X
QR CODE|

|

|

|

Fiber Cleaver – FC-220
Designed to cleave either 900 µm buffered or 250 µm coated fiber, this fiber cleaver’s quick and easy three step operation is perfectly suited for mechanical splicing and quick field termination of fiber connectors.
Replacement Carbide Steel Blade: FC-4; Replacement Leaf Spring: FC-65

https://uqr.to/nrhm

Precision Fiber Optic Cleaver – FC-500
The Jonard Tools FC-500 Precision Fiber Cleaver is designed to provide a precise cleave and prepare a fiber to be fusion spliced for 250 µm and 900 µm coated optical fiber.
Replacement Blade: FC-500RB

https://uqr.to/nrfd

One Step Fiber Optic Cleaver w/ Auto-Rotating Blade – FC-600
The Jonard Tools FC-600 Precision Fiber Cleaver is designed to provide a precise, one step cleave to prepare fiber to be fusion spliced. The one step design automatically cleaves the fiber, rotates the blade, and collects fiber scraps.
Replacement Blade: FC-600RB

https://uqr.to/1491y

Fiber Connector Cleaning/Inspection Kits
Provides you with all the tools needed for cleaning and inspecting fiber connector end faces.

JONARD P/N| DESCRIPTION| TK-182| TK-183| TK-184| TK-184A
---|---|---|---|---|---
Fiber Cleaning Kit; Replacement Refill Kit: TK-182RF| Fiber Optic Connector Clean & Prep Kit, w/ Cleaver| Fiber Optic Connector Clean & Prep Kit, Precision Cleaver| Fiber Optic Connector Clean & Prep Kit+
DW-90| Dry Wipes for Cleaning Fiber| X| | |
FW-50| Fiber Wipes (Pack of 50)| | X| X| X
FC-220| Fiber Cleaver| | X| |
FC-500| Precision Fiber Cleaver| | | X| X
FCC-125| Fiber Connector Cleaner 1.25 mm| X| | |
FCC-250| Fiber Connector Cleaner 2.5 mm| X| | |
FCF-3| Nonflammable Fiber Cleaning Fluid| X| | |
JIC-186| Wire & Kevlar® Cutting Shears| | | | X
JIC-375| Fiber Optic Stripper, Three Hole| | X| X| X
JIC-63020| 9″ Curved Jaw Cable Cutter| | | | X
H-20| Rugged Carrying Case| X| X| X|
H-22| Rugged Carrying Case w/ Straps| | | | X
VFL-150| Visual Fault Locator Kit| | | | X
VFL-25| Visual Fault Locator| | X| X|
QR CODE| | | |
JONARD
P/N| DESCRIPTION| TK-186| TK-188| TK-189
---|---|---|---|---
Fiber Connector Cleaning Kit| Fiber Connector Cleaning & Inspection Kit 200x Magnification| Fiber Connector Cleaning & Inspection Kit 400x Magnification
FCC-125| Fiber Connector Cleaner 1.25 mm| X| X| X
FCC-250| Fiber Connector Cleaner 2.5 mm| X| X| X
FCC-300| Universal Fiber Connector Cleaner| | X| X
FCT-100| Fiber Connector Insertion and Removal Tool| X| X| X
FIM-200| Fiber Inspection Microscope 200x Magnification| | X|
FIM-400| Fiber Inspection Microscope 400x Magnification| | | X
FL-2000| LED Flashlight with Zoom Lens| X| X| X
FW-50| Fiber Wipes (Pack of 50)| X| X| X
H-90| Rugged 21 Pocket Tool Case| X| X| X
QR CODE| | |

QuickSleever ®- PSI-15
An award winning design to make loading protection sleeves onto fiber quick and easy, the PSI-15 QuickSleever® tool is perfect for aligning fiber to the holes of protection sleeves and is a real timesaver.

https://uqr.to/qtit

Fluid Dispenser for 220 mL Fiber Cleaning – FD-220 Designed to store and dispense cleaning fluids, such as isopropyl alcohol, to clean the end-faces of fiber optic cables.

https://uqr.to/nrfh

Fiber Optic Cleaning Fluid – FCF-3 This quick-drying, nonflammable cleaning fluid is perfect for cleaning bare fiber, connector end-faces, and electronic components.

https://uqr.to/qakj

Fiber Wipes (Pack of 50) – FW-50 Alcohol Wipes. Pure 91% Isopropyl Alcohol.

• Excellent Cleaner for optical surfaces, glass fibers, and connector end faces
• Fast evaporating, residue-free solvent
• Mild, non-abrasive solvent
• Compatible with most plastics, glass and metals
• Convenient, safe package

https://uqr.to/nrhk

Dry Wipes (90 Pcs) – DW-90 Made from a lint-free polyester fabric packaged in a convenient dispenser, these fiber optic wipes are perfect for cleaning bare fiber, connector end-faces, and electronic components.

https://uqr.to/qakl

Fiber Scraps Disposal Can – FDC-66
This can allows safe disposal of cleaved fiber ends. The twist lock cover locks scraps in the disposal can for safe and easydisposal.

https://uqr.to/nrfi

Pocket Continuity Tester & Toner w/ Voltage **Protection – PT-300
** Designed to identify cables in an MDU and detect troublesome short circuits, this pocket continuity tester and toner is perfect for testing cables up to 5,000 ft (1,500 m) on the go. Features manual ON/OFF switch & voltage protected up to 52V.
Replacement Speaker for Pocket Toner: PT-350 Piezo Speaker

https://uqr.to/nrkp

Non-Contact Dual Range Voltage Detector Pen, 24-1000VAC & 90-1000VAC w/ LED Flashlight – VT-1100
Designed to identify the presence of AC voltage in outlets, switches, circuit breakers, fuses, wires, and cables, this voltage tester is the perfect tool for verifying low and high voltage in live circuits.

• Low Voltage Detection between 24 to 1000 VAC
• High Voltage Detection between 90 to 1000 VAC

https://uqr.to/p8yc

Cable Mappers & Toners

Find and identify multiple coax cables in main cable boxes. For use on COAX Cables for CATV, Satellite Installations, Audio Video Equipment, CCTV and Security & Alarm Installations. These COAX Cable Mappers & Toners are designed to quickly find and identify multiple cables and easily map runs to and from a central cable bundle.
CM-8 Kit contains:
Cable Mapper and Toner, 8 numbered & color-coded cable identifiers (#1 White,

2 Red, #3 Black, #4 Blue, #5 Green, #6 Yellow, #7 Purple, #8 Brown, (2)

Alligator Clip Sets, Rugged Nylon Case, and an Instruction Sheet Replacement Cable Identifiers: CMI-SET8 (Set of 8)
CM-17 Kit contains:
Cable Mapper & Toner 8 Way Kit CM-8 & CMI-RJ45 RJ45 Adapters (Set of 9)

|
---|---

<https://uqr.to/nrks>

|

<https://uqr.to/nrkr>  

Modular Cable Tester – MCT-468
Designed to test the continuity of RJ45, RJ12, and RJ11 connectorized cables, this cable tester checks and troubleshoots pin connections in network and telecom cables.

• Tests for opens, shorts, and miswiring of RJ45, RJ12, and RJ11 terminated cables
• Full LED indication lights on both main and remote unit

https://uqr.to/nrkv

Cable Tester Tone & Probe Kit – TETP-800 Designed to quickly trace and identify cables, wires, and wire pairs, the Jonard Tools TETP-800 tone and probe kit is the perfect kit for any Voice Data Video (VDV) professional.

https://uqr.to/nrgd

Kit includes:
TEP-100 Tone Tracing Probe

• Plastic probe tip prevents accidental shorts
• Adjustable volume knob to work silently or to hear tone more easily
• Works with many other manufacturers’ analog tone generators

TET-600 Cable Tester & Toner

• Provides tone via RJ11 connector or alligator clips
• Works with our TEP-100 tracing probe or others to identify cables
• Able to test the continuity of cables and the polarity of telephone lines

Cable Tester Tone & Probe Kit+ w/ ABN – TETP-901 Designed to identify, trace, and test the continuity of BNC & F connectorized COAX cables, network cables using RJ45 connectors, and telephone lines using 6P2C/4P2C plugs. This multi-function cable tester tone and probe kit is the perfect kit for any Voice Data Video (VDV) professional.

https://uqr.to/qfrg

Kit includes:
TET-700BC Cable Tester & Toner+ w/ ABN

• Plastic probe tip prevents accidental shorts
• LED light provides a visual indication of signal strength

TEP-200 Tone Tracing Probe+

• Remote terminator can be used to test network cables with ease
• Provides tone via RJ45 and BNC connectors or test clips
• TET-6 Accessory Kit for Cable Testers & Toners+

HDMI Cable Tester – HDMI-100
Designed to test HDMI and Mini HDMI cables with ease, this HDMI Cable Tester is the perfect tool for evaluating HDMI cables that may have shorts, open circuits, or have wire pairs in the wrong order. This HDMI tester features the following:

https://uqr.to/upix

• Perfect for use on 1.2V, 1.3V, 1.4V, 2.0V HDMI or Mini HDMI cables
• Scan mode allows you to see each individual connection being tested
• Full Display mode shows all of the tested connections at once
• Remote can be detached from the main unit, allowing you to quickly and easily test HDMI cables that are installed or very long
• Auto-shutdown function after 10 minutes helps preserve battery life
• Includes (1) 9V battery required for operation

Magnetic Cable Retrieval Systems

Designed with ultra-strong neodymium magnets and a cylindrical head with rubber-coated wheels, this magnetic cable retrieval system makes it quick and easy to pull wire through drywall, finished walls, and other tight spaces without damaging or scuffing the surface.
PATENTED.

https://uqr.to/nrlj

Kits (MP-700) include: Magnetic Retriever, 3/4″ Drop Magnet with Pull Line, Convenient Carrying Case

JONARD P/N

|

DESCRIPTION

---|---
MP-700| MagneTriever® MaxForce+ Retrieval System
MP-220| 3/4″ Drop Magnet without Leader
MP-210| 3/4″ Drop Magnet with Leader
MP-100| 1/2″ Drop Magnet without Leader

Telephone Butt Set w/ ABN, Analog – TBS-100

Designed to facilitate the installation, service, and maintenance of analog telephone lines, this telephone butt set has all the essential functions for testing telephone lines such as detecting dial tone, making and receiving calls, and tone and pulse modes. This telephone test set also features the following:

https://uqr.to/nrgc

• Dial, ring, talk, mute, or redial using this telephone line tester
• Sends signals via dial tone (DTMF) or dial pulse
• Angled Bed-of-Nails (ABN) Clips clamp connections securely
• Includes telephone line tester, RJ11 test cord, and an extra fuse
• Waterproof housing protects the unit from inclimate weather
• RJ11 switchbox can test telephone lines directly by plugging them in
• Battery free! No need for batteries as the unit operates using the ABN hook up or is powered by the telephone line

Torque Wrenches

The full head Torque Wrenches behave like traditional open end wrenches. Designed for F connectors, these wrenches help prevent over tightening. An audible click tells you the F connector has been torqued to the proper torque requirement.
These wrenches all have angle heads, sized for 1/2″, 7/16″, 9/16″ applications, and are designed with an ergonomic cushioned handle for user comfort and protection. These wrenches work in tightening mode only. Note: Speed Head wrenches are designed to act like a ratcheting wrench, skipping over corners of nuts/bolts (allowing for continuous turning).

SPECS

| TWAF-71620| TWAS-71620| TWAF-1220| TWAF-91620| TWAF-71625| TWAF-1130|

TWAF-71630

---|---|---|---|---|---|---|---
TORQUE| 20 in-lb and 2.26 N-m| 25 in-lb and 2.82 N-m| 30 in-lb and 3.39 N-m
WRENCH SIZE| 7/16″ (11.11 mm)| 7/16″ (11.11 mm)| 1/2″ (12.7 mm)| 9/16″ (14.29 mm)| 7/16″ (11.11 mm)| 11 mm| 7/16″ (11.11 mm)
HEAD TYPE| Full| Speed| Full| Full| Full| Full| Full
QR CODE| | | | | | |

SPECS

| TWAS-71630| TWAF-91630| TWAF-71640| TWAF-91640| TWAF-2244| TWAF-2288|

TWAF-22176

---|---|---|---|---|---|---|---
TORQUE| 30 in-lb and 3.39 N-m| 40 in-lb and 4.52 N-m| 44 in-lb and 5 N-m| 88 in-lb and 10 N-m| 176 in-lb and 12 N-m
WRENCH SIZE| 7/16″ (11.11 mm)| 9/16″ (14.29 mm)| 7/16″ (11.11 mm)| 9/16″ (14.29 mm)| 7/8″ (22 mm)| 7/8″ (22 mm)| 7/8″ (22 mm)
HEAD TYPE| Speed| Full| Full| Full| Full| Full| Full
QR CODE| | | | | | |

Speed Wrenches

Our PATENTED speed wrenches are designed to get your job done more efficiently. This line of speed wrenches is made to work on splitters, F connectors, and all 7/16″ connections. These wrenches are made of chrome vanadium steel, chrome plated, and polished to a high gloss finish. Speed heads make tightening and loosening quick and easy while the circular hole in the tool allows you to add this to your carabiner and/or tool belt.

SPECS| ASW-12| ASW-716| ASW-916| ASW-R12| ASW-R716| ASW-7916| ASWS-716| ASWS-R716
---|---|---|---|---|---|---|---|---
DESCRIPTION| Angled Head Speed Wrench 1/2″| Angled Head Speed Wrench 7/16″| Angled Head Speed Wrench 9/16″| Ratcheting Speed Wrench 1/2″| Ratcheting Speed Wrench 7/16″| Double-Ended Speed Wrench 7/16″ & 9/16″| Angled Speed Wrench Stubby 7/16″| Ratcheting Stubby Speed Wrench 7/16″
WRENCH TYPE| Speed| Speed| Speed| Combination, Speed, Ratcheting| Combination, Speed, Ratcheting| Speed| Speed| Combination, Speed, Ratcheting
QR CODE| | | | | | | |

Combination Wrenches
These combination wrenches measure 7/16″ at both ends and have an angled offset (15°) to ease access in confined areas. Chrome plated, polished to a high gloss finish and made of chrome vanadium steel. The ratcheting end of the CWRR-716 allows you to toggle from tightening to loosening.

SPECS

| CWS-716| CW-716| CWRR-716|

OW-38716

---|---|---|---|---
DESCRIPTION| Combination Stubby Wrench 7/16”| Combination Wrench 7/16”| Ratcheting Reversible Combination Wrench 7/16″| Open-Ended Wrench 3/8” & 7/16”
QR CODE| | | |

Stay Connected with all things Jonard!
www.YouTube.com/JonardTools
www.Facebook.com/JonardTools
@JonardTools
@JonardTools
@JonardTools

References

• Podcast | Jonard Tools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>