VEVOR MFS-140 Electric Grain Grinder User Manual
- June 14, 2024
- VEVOR
Table of Contents
VEVOR MFS-140 Electric Grain Grinder
Introduction
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
CustomerService@vevor.com
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
Note : Before beginning assembly of product, make sure all parts are
present. Compare parts with package content list and hardware contents. Do not
attempt to assemble the unit if any parts are missing or damaged.
Contact customer service for replacement parts.
SAFETY INSTRUCTIONS
WARNING: Read all safety warnings, instructions, illustrations and
specifications provided with this Grinder. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious injury.
SAVE THIS INSTRUCTION!
| Warning – To reduce the risk of
injury, user must read instructions manual carefully.
---|---
| Alternating current
| This symbol, placed before a safety comment, indicates a kind of precaution,
warning, or danger. Ignoring this warning may lead to an accident. To reduce
the risk of injury, fire, or electrocution, please always follow the
recommendation shown below.
| Danger!
Risk of personal injury or environmental damage! Risk of electric shock!
Risk of personal injury by electric shock!
| Warning- Be sure to wear ear protectors when using this product.
| Warning- Be sure to wear eye protectors when using this product.
| Warning- Be sure to wear gloves when using this product.
| Protective earth
| Disposal information:
This product is subject to the provision of European Directive 2012/19/EC.
The symbol showing a wheelie bin crossed through indicates that the product
requires separate refuse collection in the European Union. This applies to the
product and all accessories marked with this symbol.
Products marked as such may not be discarded with normal domestic waste, but
must be taken to a collection point for recycling electrical and electronic
devices
- READ All OPERATING INSTRUCTIONS AND PRODUCT SAFETY LABELS! FAILURETO FOLLOW ALL INSTRUCTIONS MAY RESULT IN SERIOUS INJURYORPROPERTYDAMAGE!
- CHECK FOR DAMAGED PARTS: Before using the grinder, check whether all parts work normally and perform the expected functions. Check for alignment, binding and installation of moving parts. and any other conditions that may affect the operation. If any parts, the Power Cord or the Grinder are damaged, call the Customer Service number shown in this manual.
- Always unplug power cord from outlet when not in use, before putting on or taking off parts or accessories, and before cleaning. After unplugging the unit, turn power switch ON, then OFF to ensure that all power has been discharged from the grinder.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- NEVER LEAVE GRINDER UNATTENDED WHILE IT IS RUNNING!
- Wait until all moving parts have stopped and turn off power before removing any part from the grinder.
- DO NOT use outdoors, this product is intended for INDOOR USE ONLY.
- DO NOT pull the power cord to disconnect.
- DO NOT USE WITH EXTENSION CORD. Always plug directly into a grounded wall receptacle.
- This grinder uses a grounded, three prong plug (hot, neutral and ground), the grounding plug is used for electrical appliances with metal shell to prevent electric shock. DO NOT change or alter the plug in any way. NEVER break off a grounding prong froma3–‐conductor plug. Doing so will invalidate the warranty and may cause electric shock.
- Place the grinder on a firm and stable surface. Ensure that the grinder is not placed near the edge of the worktop, where it can be easily pushed off or fall.
- The Gear Housing and the Motor Cover may become HOT during operation. This is normal. DO NOT TOUCH these parts while operating.
- To reduce the risk of unintentional starting, check that the control is OFF before plugging the cord into wall outlet. To disconnect, turn the controller to OFF, then remove plug from wall outlet.
- DO NOT operate your grinder under a wall cabinet. Always unplug the unit from the electrical outlet when storing it. Not doing so could create a risk of fire, especially if the appliance touches the walls of the garage or the door touches the unit as it closes.
- NEVER plug the grinder in where water may flood the area.
- To protect against risk of electrical shock, DO NOT submerge the grinder in water or other liquids. Be sure the grinder is disconnected from the power source before cleaning. NEVER rinse the Grinder Motor under running water, only use a moist cloth to clean the Grinder Motor Unit.
- The use of attachments or parts not specifically recommended or sold by the manufacturer for this grinder will void the warranty and may cause fire, electric shock or injury.
- The Manufacturer disclaims any responsibility in the case of improper use of Grinder. Improper use of the Grinder voids the warranty.
- DO NOT REMOVE WARNING LABELS FROM THE GRINDER. Doing so will void the product warranty and may result in serious personal injury.
- This appliance must be grounded while in use to protect the operator from electrical shock. This grinder uses a grounded, three prong plug that should be connected directly to a grounded 120V(US)/230V(EC), three prong grounded wall outlet receptacle. Grounded plugs are used on metal-encased electric appliances in order to provide protection from an electric shock. DO NOT change or alter the plug in anyway. NEVER break off a grounding prong from a 3-conductor plug. Doing so voids the warranty and may result in electric shock.
- Type X attachment: If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
TECHNICAL PARAMETER
| MODEL | RATINGS | Continuous working time | Capacity |
|---|---|---|---|
| MFS-140 | 110V/60Hz | 1500W | 1hour |
230V/50Hz
PRODUCT STRUCTURE
| NO. | Name | Quantity |
|---|---|---|
| 1 | Adjusting handle | 1 |
| 2 | Regulating screw | 1 |
| 3 | Plugging plug | 1 |
| 4 | Screw | 1 |
| 5 | Head cover | 1 |
| 6 | Hopper base | 1 |
| 7 | Hopper | 1 |
| 8 | Dust cover | 1 |
| 9 | Millstone base | 1 |
| 10 | Stationary grinding plate | Dry grinding plate1 Wet grinding plate1 |
| 11 | Latch | 2 |
| 12 | Worm | 1 |
| 13 | Shim | 1 |
| 14 | Moving grinding plate | Dry grinding plate1 Wet grinding plate1 |
| 15 | Hood | 1 |
| 16 | Motor | 1 |
| 17 | Support frame(R) | 1 |
| 18 | Support rod | 1 |
| 19 | Support frame(L) | 1 |
| 20 | Fastening handle | 1 |
OPERATING INSTRUCTION
- Install and fix the machine;
- Turn on the power to run the machine;
- Containers placed at the outlet;
- Place the ingredients to be processed in the funnel;
- Turn the adjusting handle to adjust the thickness of the ground ingredients.
| This product is subject to the provision of EuropeanDirective2012/19/EC.
The symbol showing a wheelie bin crossed through indicates that the product
requires separaterefusecollection in the European Union. This applies to the
product and all accessories marked with this symbol. Products marked with this
symbol cannot be discarded with normal householdwaste but must be taken to an
electrical and electronic equipment collection point for recycling.
---|---
Importer : WAITCHX
Address: 250 bis boulevard Saint-Germain 75007 Paris
Importer : FREE MOOD LTD
Address : 2 Holywell Lane, London, England, EC2A 3ET
EUREP UK LTD
UNIT 2264, 100 OCK STREET, ABINGDONOXFORDSHIRE ENGLAND OX14 5DH
EUREP GmbH Unterlettenweg 1a, 85051 Ingolstadt, Germany
Manufacturer : Anhui Xuzhong Intelligent Technology Co., Ltd. Address: No.23,Lantian Road, Economic Development Zone, Wangjiang County, Anqing City, Anhui Provice, China
Customer Support
TechnicalSupport and E-Warranty Certificate
https://www.vevor.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>