Gymax AT5535 Bicycle Parking Rack User Manual
- June 15, 2024
- GYMAX
Table of Contents
Gymax AT5535 Bicycle Parking Rack
With your inspiring rating, COSTWAY will be more consistent in offering you EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
Parts
Assembly Instruction
- Insert the Tubes 1 (2pcs) into Tubes 3 (4pcs).
- Place the Rack 4 (6pcs) onto assembled base tubes, and connect with machine screws A and nuts B.
- Dig small holes into the ground, then put the plugs D in.
- Fix the bike stand on the ground with self-tapping screws C.
Building instructions
- Insert tube 1 into tube 3.
- Place the rack on the assembled base tubes and connect it with machine screws A and nuts B.
- Dig small holes in the ground and insert the plugs D a.
- Attach the bike stand with self-tapping screws C on the floor.
Assembly instructions
- Insert the tubes (1) into the tubes (3).
- Place the support (4) onto the assembled base tubes and connected them with the machine screws (A) and the nuts (B).
- Dig small holes in the ground, then insert the plugs (D).
- Secure the bike rack to the floor with the self-tapping screws (C).
Installation instructions
- Insert the tubes marked No. 1 (2 pieces) into the tubes marked No. 3 (4 art).
- Place the elements marked No. 4 (6 pieces) on the assembled tube base and connect using machine screws “A” and nuts “B”.
- Make some holes in the ground and then attach “D” pegs to them.
- Attach the bike stand with self-tapping screws “C”. no opinions on our website.
More Information
- US office: Fontana
- UK office: Ipswich
- DE office: FDS GmbH, Neuer Höltigbaum 36, 22143 Hamburg, Germany
- FR office: 26 RUE DU VERTUQUET, 59960 NEUVILLE EN FERRAIN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>