UNITECK UNIFIX 300 S Tilting Mounting Bracket For Solar Panels User Guide
- June 15, 2024
- UNITECK
Table of Contents
UNIFIX 300 S
UNIFIX 300 S Tilting Mounting Bracket For Solar Panels
User Guide
Tilting mounting bracket for solar panels – road sign
UNIFIX 300 S Tilting Mounting Bracket For Solar Panels
Dear customer, thank you for purchasing one of our UNITECK products. Please read carefully all the instructions before using the product.
DESCRIPTION
Unifix brackets have been specially designed to fix your Unison 300.12M
photovoltaic panels.
Easy to install, they can be mounted on :
- Round sign road masts using U-bolts with M8 or M10 screws (U-bolt not provided)
- On round masts with a diameter of 40 to 60mm (U-bolt not provided)
Thanks to their galvanized steel structure and corrosion resistant stainless-
steel screws, they are perfectly suited for outdoor use.
Equipped with a multi-position tilting system, Unifix brackets allow for an
optimization of your panel’s performance depending on the chosen orientation
Electrical performance depending on tilt and panel orientation
| | | |
East| 93%| 90%| 78%| 55%
South east| 93%| 96%| 88%| 66%
South| 93%| 100%| 91%| 68%
South west| 93%| 96%| 88%| 66%
West| 93%| 90%| 78%| 55%
RECOMMENDATIONS
Mount Unifix brackets only on surfaces with sufficient bearing capacity. Consider the additional load with the panel:
| Mount | Panel |
|---|---|
| Unifix 300S = 19,8 kg | Unisun 300.12m =15,5 kg |
Fastening: to prevent large quantities of snow from accumulating behind
the sensor, install appropriate barrier grids.
The position of the solar panel influences your electrical production. Choose
the most optimal inclination and orientation to suit your environment. Avoid
shaded areas or objects that are a source of shadow (eg tree)
Before attaching and connecting, please observe:
- the maximum distances between each element shown below.
- connecting order
SAFETY INSTRUCTIONS
- Take the appropriate measures to prevent accidents during your mounting steps.
- If the bracket and the mounting tools are exposed to sunlight for a long period, there is a risk of getting burnt. Make sure to protect yourself accordingly.
- When finished, check and ensure that all of your brackets and panels are fixed properly.
UNIFIX 300 S – ASSEMBLY
Spare parts list :
- Fix part N°1 on your mast thanks to adapted U-bolts. Example with our flanges for 130-190mm diameter masts, ref. 2662 (not included).
- Place part N°2 to reach the angle wanted (from 30° to 60° by 5°). Screw all the parts together.
- Place and screw the panel in portrait or landscape orientation (example in portrait).
- Place parts N°3 against the panel and screw them.
At the end of assembly, please ensure that the mounting brackets and your panel are properly fixed.
WARRANTY
The warranty covers any defect, manufacturing flaws for 1 year from the date
of its purchase (Pieces and workforce).
Warranty does not cover:
– normal wear of parts
– fatly mounting of bracket
In case of failure, return the product to your distributor by attaching:
– the dated proof of purchase (receipt, bill…)
– explanatory note of the failure
Caution: Our after-sales service does not accept carriage forward/ collected
returns.
After the warranty, our after-sales service ensures repairs after acceptance
of a quotation
After-sales service contact :
UNITECK
1 Avenue de Rome
Zee Via Europa – battement Cassis
34350 Venders -France
email : sav@uniteck.fr
www.uniteck.fr