CTA PAD-SHFSWAO Heavy Duty Security Medical Instruction Manual

Heavy-Duty Medical Mobile Floor
Stand and Accessories (White)
for 7-13-Inch Tablets
PAD-SHFSWAO
INSTRUCTION – MANUAL

Contents:

INSTRUCTIONS:

1. Installing the wheels: 1A. Take one wheel (E) and align it to the leg arm holes on the underneath of the base (H). Initially you can use your hands and manually rotate the wheel until slightly tightened. Then use the provided wrench tool (B) at the hex nut and rotate to securely tighten the rest of the way.

2. Assembling the base to body: 2A. Align the bottom of pole body (B) to the top center of the base (C). While pieces are connected, securely flip over so you can see the bottom. Align washer (E) to the hole on the bottom. Using your hands, identify L-shaped component (F) and rotate through the washer into the hole until securely tightened. Pole body and base should now be securely attached to each other.

3. Locking casters: 3A. Press the wheel lever up or down to place wheels in locked or unlocked mode depending if you want to be in a mobile or stationary setup. Make sure you adjust all (5) wheels at the same time or it won’t properly be setup.

4. Setting up tablet in holder: 4A. Press and hold on the button as shown, open the arms of the holder at the desired measure of tablet. 4B. Insert Foam pad (I) that fits better into the center of holder, then insert Tablet in place as shown. 4C. Close arms to adjust frame to secure your tablet as shown.
   FOAM ADJUSTABILITY
   Use the sponge to adjust the thickness between the tablet and the stand
   Paste Method
   1. Tear off the backing paper on the foam pad.
   2. Stick the foam pad to the frame as shown in the right picture.

5. Assembling base stand with gooseneck, holder and battery cradle:5A. Take the gooseneck with holder (A), the battery cradle (J), the base stand (B), and align them all together as shown in the right. First, hook the battery cradle onto the base stand metal adapter. Then rotate in the gooseneck component (A) into the base stand (B) until securely tightened. Turn the Y screw (see detail diagram to the right) to securely fasten the gooseneck to the base stand.

6. Setting up handle: 6A. Find the desired height on the pole / floorstand (B) where you wish to attach the handle (K). Then align the screw and the U bracket (L,M) with the opening in the handle (K).
   6B. Rotate in screw clock wise as shown until securely tightened.

7. Setting up basket: 7A. Find the desired height on the pole / floorstand (B) Align U bracket (O) holes with basket (N) screw holes on either side of the central pole. Pass screw (R) through washer (Q), then through screw hole, and turn in nut (P) on opposite side.

How to flex and adjust product:

Lock security

1. Isert the key into the lock slot.
2. Press and hold on the release button to unlock the holder.

Tightening & **loosening main joint**
Using an allen key (S), tighten the joint to create a more static and rigid setup. Loosen to allow adjustability as needed.

Adjusting Gooseneck
Using your hands, simply adjust for a multitude of angles the gooseneck until desired orientation, tilt angle, side angles are all achieve for the preferred setup.

Asjusting height
Identify the center pole height adjustment knob. Rotate clockwise and counterclockwise to raise or lower the center pole for preferred height. Once desired height is set, rotate knob in the middle opposite side of the handle to tighten and create a more rigid and secure setup.

36 Taaffe Place Brooklyn, NY 11205
support@ctadigital.com
888-733-4448
www.ctadigital.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>