auray BA-XE4 Broadcast Arm with Integrated XLR Cable Owner’s Manual

: June 7, 2024
: auray

Table of Contents

Thank you for choosing Auray.
Overview
Instructions
Specifications
Precautions
Warranty
Documents / Resources

auray BA-XE4 Broadcast Arm with Integrated XLR Cable Owner’s Manual

Thank you for choosing Auray.

The Auray BA-XE4 articulating broadcast arm features rugged steel dual-arm construction that will give your office or home studio the look and feel of a professional broadcast studio. This durable broadcast arm features an integrated 10-foot XLR mic cable and a 5/8″-27 stud for rapid attachment of your microphone and shock mount assembly that weighs up to 3.5 pounds. Parallel spring configuration allows for smooth and noiseless mic positioning with up to 20 inches of reach, and dual locking knobs assure the mic won’t slip out of position once it’s set. The included flange mount and C-clamp provide temporary or more permanent tabletop or desktop mounting options

Overview

Broadcast Arm

Microphone locking knob ****
5/8″-27 microphone mount
Tension knob
Integrated XLR microphone cable
Base stud

C-clamp
Socket
Locking knob
T-handle

Tabletop Flange Mount
Socket
Locking knob
Screw holes

Instructions

Mounting the Arm with the C-clamp

The C-clamp is perfect for nonpermanent mounting on surfaces up to 2.2 inches thick, such as tabletops, desks, or workstations.

Caution: For a secure and stable setup, the desk’s surface and underside should be flat, and the corners should be square. Attaching the clamp to a beveled, curved, or uneven surface can result in unstable and unsafe installation.
Instruction

Fully open the C-clamp.
Place the C-clamp on the edge of a desk so the C-clamp bracket is flush against the side of the desktop
Secure the C-clamp by tightening the T-handle until it’s securely fixed to the desktop
Loosen the mounting socket’s locking knob, and slide the arm’s base stud into the C-clamp’s socket.
Position the arm as desired, and tighten the locking knob to secure the arm’s position. Loosen the locking knob to swivel the arm or remove it from the mount

Mounting the Arm with the Tabletop Flange mount

The tabletop flange mount is for permanent installation onto surfaces like production tables, podiums, and broadcast workstations.
Instruction

Place the flange mount on a secure, flat surface like a tabletop or desktop.
Secure it to the surface with three screws.
Loosen the mounting socket’s locking knob, and slide the arm’s base stud into the flange’s socket.
Position the arm as desired, and tighten the locking knob to secure the arm’s Loosen the locking knob to swivel the arm or remove it from the mount.

Adjusting the Microphone Angle

Loosen the microphone locking knob, and adjust the angle of the microphone.
Tighten the microphone locking knob.

Adjusting the Tension on the Broadcast Arm

The broadcast arm supports a microphone and shock mount assembly that weighs up to 3.5 lb. To increase the arm’s tension, tighten the tension knob until the microphone is securely held in place.

Connecting the microphone

Once the microphone and shock mount are attached to the broadcast arm, plug the arm’s integrated male XLR connector into the microphone’s female XLR jack.

Specifications

Horizontal Arm Length: 19.7 in. (50 cm)
Vertical Arm Length: 19.7 in. (50 cm)
Arm Reach: 38 in. (96.5 cm)
Material: Steel
Clamp range: 2.2 in. (5.6 cm)
Weight Capacity: 3.5 lb. (1.6 kg)
Color: Matte black powder-coat finish
Weight: 1.8 lb. (816.5 g) arm only

Precautions

Please read and follow these instructions, and keep this manual in a safe.
Handle the unit with care.
This unit contains moving parts and could cause injury.
Keep this unit away from children.
Tension springs are loaded under pressure and may cause injury. Please exercise caution when unpacking this unit.
Do not attempt to disassemble or repair the equipment doing so will void the warranty, and Auray will not be responsible for any damage.
Use only parts provided by the manufacturer.
Clean the unit with a soft dry cloth.
Make sure that this product is intact and that there are no missing parts.
All images are for illustrative purposes only.

Warranty

One Year Limited Warranty

This Auray product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Auray Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Auray along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.aurayaudio.com or call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group. www.gradusgroup.com
Company Logo AURAY is a registered trademark of the Gradus Group. © 2020 Gradus Group LLC. All Rights Reserved.