CTA ADD-LTPCF VESA Compatible Laptop and Other Device Holder with Built-in Cooling Fan Instruction Manual
- June 3, 2024
- CTA
Table of Contents
CTA ADD-LTPCF VESA Compatible Laptop and Other Device Holder with Built-
in Cooling Fan
CONTENTS
INSTALLATION
How to Setup your Holder
-
Extend the holder brackets.
-
Adjust the holder to your laptop by sliding the brackets towards it.
-
Once laptop is securely in place, tighten four knobs as shown until securely fastened.
Powering Up Cooling Fan
-
Locate the fan.
-
Find the integral USB cable below.
-
Plug into your laptop to power the fan.
Cable Management
- Route all cables through the cable organizer as illustrated.
Attaching to VESA Compatible Device
-
Locate the four VESA hole sunderneath. Using an allen key (not provided, endcaps)
-
Screw in the four screws from the back to a VESA compatible device using screwdriver. (not provided)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>