CTA LT-PCM Articulating Laptop Plate and Pole Clamp Mount
- June 4, 2024
- CTA
Table of Contents
CTA LT-PCM Articulating Laptop Plate and Pole
PACKAGE CONTENTS
INSTRUCTIONS
Connecting the Clamp and the Poles
- A. Screw up the small meter screws into the holes on the bottom of the pole.
- B. Align and insert the Pole into the top round component of the Clamp.
- C. Screw in the screw to connect both the pole and clamp component securely.
Assemble Clamp Components Together
- A.Align the preferred (2) screw holes of both clamp components. Then screw in both screws until securely tightened.
- B. Adjust the clamp and tightening rod to fit with different table/surface thickness.
Attaching adjustable VESA Plate onto Pole
- A. Loosen all VESA Plate pole grips. Slide down each VESA plate to desired position then, tighten pole grip. Adjust VESA angle and orientation as preferred. Repeat steps for other VESA plates.
- B. Screw on clockwise metal endcap until securely tightened.
Connecting VESA to VESA
This VESA Compatible Laptop Plate allows you to connect with other VESA devices by screwing up the bolts with a screwdriver as shown.
Adjusting the Laptop Plate
This VESA Compatible Laptop Plate allows you to rotate 360 degree.
Installing Laptop into Plate
Sliding open the arms of the plate ,place your laptop in position then release
to hold the laptop.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>