Vodafone PlusBox 301 System Connection Plus User Guide

July 17, 2024
Vodafone

Vodafone PlusBox 301 System Connection Plus User Guide

PlusBox 301 Quick Start Guide

Note:

Before you can use Anlagen-Anschluss Plus, you need to activate and to configure PlusBox 301. Detailed instructions on how to achieve this are available at www.vodafone.de/aaplus-support.
Connecting devices Connect PlusBox 301 as follows with the telephone socket (TAE) and with your ISDN PBX, for ISDN Voice
+ Data additionally with your network devices (further details see Chapter 2 of the user manual):

Connecting devices

Connect PlusBox 301 as follows with the telephone socket (TAE) and with your ISDN PBX, for ISDN Voice
+ Data additionally with your network devices (further details see Chapter 2 of the user manual):

Setting up the configuration computer for DHCP

The computer you want to use to configure PlusBox 301 must obtain its IP address dynamically via DHCP (Dynamic Host Configuration Protocol). This is the default setting which is preassigned to most computers. If this is not the case with your configuration computer, configure it using the following TCP/IP properties (details see Section 5.1 of the user manual)

Parameter Auswahl
IPv4 address Obtain an IP address automatically
DNS server adress Obtain DNS server address automatically

Activating and setting up PlusBox 301

  1. Connect one of the ETH 0/0 to ETH 0/3 ports of PlusBox 301 – exclusively Port ETH 0/3 for auto- matic IP Voice + Data conncection! – via the yellow LAN cable with a LAN port of your configuration computer if you have not already done
  2. Open the Internet browser and enter http://192.168.2.1 or box.
  3. Enter Username and Password (see PlusBox 301 underside), confirm with Log in :

Vodafone GmbH, Ferdinand-Braun-Platz 1, D-40549 Düsseldorf, Germany

  1. Follow the instructions of the activation wizard that opens, enter the 22-digit Modem Installation Code (MIC) from your welcome letter, click Continue and continue following the wizard‘s instructions.

  2. On the Setup page, Skip configuration storing option and continue following the wizard‘s instructions

  3. Exclusively for IP Voice + Data: switch on (move slider to the right) and set up WiFi network :

  4. Exclusively for IP Voice + Data: enter WiFi Name , choose protection mode WPA2 PSK (recommend- ed) and Band Selection , then change WiFi Password (in the window popping up).

  5. Exclusively for IP Voice + Data: switch on (move slider to the right) and set up WiFi network :

  6. Exclusively for IP Voice + Data: enter WiFi Name , choose protection mode WPA2 PSK (recommend- ed) and Band Selection , then change WiFi Password (in the window popping up).

  7. Exclusively for IP Voice + Data: switch on (move slider to the right) and set up WiFi network :

  8. Exclusively for IP Voice + Data: enter WiFi Name , choose protection mode WPA2 PSK (recommend- ed) and Band Selection , then change WiFi Password (in the window popping up).

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals