polaris PVCS 7090 HandStick PRO Aqua User Manual

polaris PVCS 7090 HandStick PRO Aqua

GENERAL INFORMATION

This User Manual will help you get acquainted with the device, the technical data, operation rules, and storage of the household electric vacuum cleaner, model POLARIS PVCS 7090 HandStick PRO Aqua (hereinafter referred to as the “vacuum cleaner”, “device”)

SCOPE OF USE
The device is intended only for the household use in accordance with this Manual. The device is not intended for industrial and commercial use. The device is also not intended for the use outdoors and in unheated rooms with the air temperature below + 15 °C and high humidity. The manufacturer shall not be liable for damage resulting from improper use or use unintended in this Manual.

DESCRIPTION OF THE DEVICE

The device is designed for dry cleaning of surfaces such as tiles, parquet, linoleum, as well as short-pile carpets and upholstery by suction of dry dust and fine dry debris.

1.  Electric floor brush
2.  Electric floor brush lock button
3.  Pipe
4.  Pipe lock button
5.  Removable Li-ion battery
6.  Battery disconnection button
7.  Button for turning on/off the vacuum cleaner and electric floor brush
8.  Button for switching the operating modes I/II/III
9.  Cover with HEPA filter
10.  Button for detachment of the dust container
11.  Crevice nozzle
12.  Mini-brush
13.  Turbo-brush
14.  Brush for polished and delicate surfaces, chandeliers
15.  Nozzle for wet cleaning
16.  Wall mount, nozzle holder
17.  Charger
18.  Floor stand
19.  Button for fixing the position of the pipe

COMPONENT PARTS

1.  Vacuum cleaner (main housing) 1 pc.
2.  Removable rechargeable Li-ion battery – 1 pc.
3.  Electric floor brush 1 pc.
4.  Charger (adapter) 1 pc.
5.  Wall mount, nozzle holder – 1 pc.
6.  Crevice nozzle – 1 pc.
7.  Mini-brush – 1 pc.
8.  Turbo-brush – 1 pc.
9.  Furniture brush – 1 pc.
10.  Pipe – 1 pc.
11.  Wet Cleaning nozzle with wet cleaning cloth 1 pc
12.  User Manual 1 pc.
13.  Warranty Certificate 1 pc.
14.  Floor stand 1pc.

UNPACKING THE DEVICE AND GETTING STARTED

• Open the box, carefully remove the device, release it from all packaging materials.
• Remove all advertising stickers from the housing of the device.
• Check the supply package (see the Component Parts Section).
• Remove all the accessories and the adapter.
• Make sure that all the components of the device are not damaged.
• Vacuum cleaner assembly:

Attention! The components of the vacuum cleaner are made of plastic and carefully adjusted to each other. To avoid damage to the retainers and seats, do not use force
during assembly. Make sure that the parts are installed in the seats without distortions and reliably clicked on the clips.

1. Install the battery (if it is removed), as shown in the figure, along the guides until it clicks:

2. For floor cleaning:
   Insert the floor brush nozzle into the pipe hole so that the contact pins are inserted into the sockets, and press until they click. Fig. 3 Connect the pipe to the suction pipe. Fig. 4

3. Using a set of accessories.
   Install the accessories directly on the vacuum cleaner’s suction pipe or on the pipe mounted on the suction pipe.

OPERATION

Cleaning floors and carpets

• Make sure that the battery is charged, the adapter is disconnected from the mains and from the device, the filter and dust collector are properly emptied of dust (see the section “CLEANING AND CARE”). Do not use the vacuum cleaner with a filter clogged with dust and a dust bag, this may lead to failure of the vacuum cleaner.
• If necessary, follow steps 1-2 or 1-3 from the previous section.
• To turn on the device, press the on/off button (see. DESCRIPTION OF THE DEVICE).
• The device has three operating modes:
  • (low suction speed and power, long operation time, the mode is started by default when the device is turned on);
  • (average speed and suction power, average operating time);
  • (high suction speed and power). To select mode II and mode III, press the mode switch button for the desired number of times after turning on the device (see DESCRIPTION OF THE DEVICE). To save battery power, mode I is recommended. If the cleaning efficiency is not sufficient (in the case of severe littering), select the following mode.
• The electric brush is designed to collect household dust from the floor and carpeting using a rotating bristle roller. Its construction is very sensitive to clogging with long hair, wool, thread, etc. In case of clogging, immediately stop using the vacuum cleaner and take measures to clean the bristle roller (see the section “CLEANING AND CARE”).
• • The wet cleaning nozzle is designed for wet cleaning of the room. To do this, attach the rag from the kit to the bottom of the wet cleaning container, pour water into the neck of the water tank. Close the lid. Secure the wet cleaning nozzle to the back of the floor brush so that the latches on the nozzle and the floor brush connect until they click. Press the water supply button to start the water flow to the rag
• When cleaning the dust, combined with wet cleaning, you should perform the main movement of the brush forward, so that when the brush moves, first remove the dust, and then wipe the cleaned area with a damp cloth.
• After cleaning, press the water supply button on the nozzle. Disconnect the wet cleaning nozzle from the brush. Do not leave water in the tank.
• • To turn off the device, press the on/off button again.
• To clean the floor in hard-to-reach places (under the table), press the lock 19 . The pipe will open in a bent position, which will allow you to clean the hard-to-reach surface without unnecessary effort.

Furniture cleaning

• Make sure that the battery is charged, the adapter is disconnected from the mains and from the device, the filter and dust collector are properly emptied of dust (see the section “CLEANING AND CARE”). Do not use the vacuum cleaner with a filter clogged with dust and a dust bag, this may lead to failure of the vacuum cleaner.
• Attach an optional accessory to the suction port. The mini-brush is suitable for cleaning furniture upholstery, and the crevice nozzle is suitable for cleaning hard-to-reach places.
• To turn on the device, press the on/off button.
• Change the mode if necessary (see the description in the previous section).
• To turn off the device, press the on/off button again.

In the event of a spontaneous stop of the motor during operation of the device, charge the battery and clean the filter and dust collector. Additional attachments can be stored in a special wall mounting compartment. To do this, fix the mount on the wall as shown on the figure. Additional accessories are inserted into special racks. You can also use a floor stand for vertical storage of the vacuum cleaner on the floor.

BATTERY CHARGING

Attention: The battery included in the set may be low of charge. Before the first use, fully discharge the battery and then fully charge it. Do not charge the battery and do not store the battery in air temperatures below 5 °C and above 40 °C. Before connecting the device’s adapter to the network, check that its technical specifications (see the “Technical Specifications” section) correspond to the network parameters.

It is recommended to charge the battery only when the device signals its imminent discharge (red glow of the charge indicator on the battery case). Do not interrupt the battery charging process until the battery is fully charged. This will extend the battery life. The battery can only be charged using the adapter included in the set of the device. The battery can be installed on the device or removed from the device before charging.

1.  Insert the adapter plug into the battery socket.
2.  Plug in the adapter. A red signal will light up on the battery charge indicator, indicating the beginning of the charge. When the battery is fully charged, the indicator will glow green.
3.  You can charge the battery separately from the vacuum cleaner.

BATTERY EXCHANGE

This model of the vacuum cleaner uses removable battery. If you need to remove the battery, press the battery disconnect button when the device is turned off and remove the battery by sliding it down the sliders. Attention: removing/installing the battery while the device is operating or while charging is prohibited! The battery capacity and the continuous operation time of the device decrease over time – this is normal. If you need to diagnose or replace the battery, contact an authorized service center of POLARIS (the list of service center addresses is included in the package and is also available on the website www.polar.ru)

CLEANING AND CARE

1.  Turn off the device, unplug it, and disconnect the adapter from the device if it is connected.
2.  Do not immerse the device and charger in water or other liquids.
3.  Do not use abrasive materials or organic solvents to clean the device.
4.  Wipe metal parts with a clean, dry cloth.
5.  Wipe the plastic parts of the appliance with a damp, wrung cloth. There should be no drops of water.
6.  Keep the device in a cool, dry place.

Cleaning the dust container
The dust container and filters should be cleaned after each use of the vacuum cleaner. Do not use a vacuum cleaner with filters clogged with dust, this may cause the failure of the motor.

1.  Turn off the device. The adapter must be disconnected from the mains and disconnected from the device.
2.  Press the release button of the electric brush on the vacuum cleaner. Disconnect the brush from the pipe. Press the accessory release button. Disconnect the pipe from the suction pipe.
3. While holding the vacuum cleaner by the handle above the trash can, depress the latch on the bottom of the dust collector to open the lid of the dust container and spill out dust and debris. Close the lid.
4.  Hold the vacuum cleaner by the handle with the dust container facing down. Drown the release button to detach the dust container, rotate the container at a slight angle in a clockwise direction, and carefully disconnect it down from the vacuum cleaner.
5.  Pull up and remove the cover with the HEPA filter. To remove the cyclone filter mesh, turn at a slight angle in a clockwise direction (looking from the bottom) as in figure 1. Then, pulling down, remove the tube of the secondary cyclone system for cleaning and washing. Turn the HEPA filter assembly in the direction shown in Figure 2 to separate the filter from the cover. This makes it easier to clean or wash the HEPA filter, see Fig. 3. Shake out the dust from the inner cavity of the HEPA filter, gently tapping it with its lower end on a flat non-metallic surface. Wash the filters thoroughly under a weak stream of running cold water without using detergents and dry them at room temperature. Pay special attention to the internal cavity of the HEPA filter. A soft bristle brush (not included) is allowed to wash the plastic housing of the cyclone filter, and the use of detergents is not allowed. Carefully inspect the elements of the filter system and the HEPA filter. If there are damages, breaks, or deformations, replace the damaged parts. Attention: do not use a vacuum cleaner with a wet filter, or with a damaged or missing filter. After cleaning or washing and drying, reassemble the filter system in the reverse order.
6.  To assemble the HEPA filter, use the same steps in the reverse order.

Attention! Do not use force when installing the filter so as not to damage the locking tabs and the filter element. Install the filter back in the compartment.
Note: It is necessary to clean the HEPA filter in the above manner after each cleaning. If necessary, replace the filter with a new one (the filter is ordered through an authorized service center)

Electric brush cleaning
Clean the brush after each cleaning. Avoid severe clogging of the bristle roller

1.  Turn off the device. The adapter must be disconnected from the mains and disconnected from the device.
2.  Disconnect the electric brush from the pipe by pressing the lock button.
3.  With a small amount of hair and threads wound on the roller, they can be cut with a knife without removing the roller from the brush body.
4.  If the bristle roller is heavily clogged, press the latch on the lower surface of the brush in the direction of the arrow, the hatch will rise automatically, remove the hatch and remove the roller from the brush body. When the roller is removed from the brush body, it can be easily cleaned from the wound hair and threads with a sharp knife or scissors.
5.  Put the bristle roller into place in the brush body in the reverse order.
6.  In case of severe clogging of the brush and drive parts, contact an authorized service center for disassembly and cleaning (work related to cleaning parts of a vacuum cleaner is not included in warranty service).

Maintenance of the wet cleaning nozzle
It is performed after each cleaning

1.  Turn off the appliance.
2.  Press the water supply button on the nozzle.
3.  Disconnect the nozzle from the electric brush.
4.  Open the lid and pour out the remaining water.
5.  Remove the cloth and wipe it under a stream of warm water with detergent, dry it.
6.  Wipe the nozzle body with a slightly damp wrung-out cloth cloth, dry without heating.

STORAGE

1.  Make sure that the device is unplugged.
2.  Clean the device.
3.  Dry the device and make sure that the device is stored in a dry, cool place.
4.  In case of long-term storage without use, check the battery regularly and charge it if necessary. If the device is not used for a long time, it is recommended to charge the battery every 3 months, having previously completely discharged it for which it is necessary to start the device in operation for the maximum possible time.
5.  Electrical devices should be stored in a closed, dry and clean room at an ambient temperature of no lower than 5ºС and no higher than 40°C with a relative humidity of no higher than 70% and no dust, acid or other vapours in the environment that negatively affect the materials of the electrical devices

TRANSPORTATION
Electrical devices are transported by all means of transport in accordance with the rules for that particular type of carriage of goods in place on a particular type of transport. When transporting the device, use the original factory packaging. Transportation of devices should exclude the possibility of direct exposure to atmospheric precipitation and aggressive environments. Attention! After the end of the service, life does not dispose of the device with household waste. Hand it over to a special collection point for future disposal. This will help protect the environment.

SALES
Sales rules have not been established.

DISPOSAL REQUIREMENTS

According to WEEE 2012/19/EU on waste electrical and electronic equipment Directive, do not dispose of the devices with the household waste. It should be transferred to an official separate waste collection center.

TROUBLESHOOTING

This table lists the most common problems that may occur when using the device. If you are unable to solve the problems by your own efforts, contact the customer support center or an authorized service center.

SPECIAL SAFETY INSTRUCTIONS WHEN OPERATING VACUUM CLEANER

• Place the device away from heating and other electrical appliances when operating.
• When operating the vacuum cleaner do not place any heating device, their power cords or other heat sources on the floor of the room to be cleaned.
• Do not use the vacuum cleaner without a dust container and filter properly serviced in accordance with this Manual.
• Do not leave the vacuum cleaner propped up in a vertical position during breaks in operation, this may cause it to fall and damage the plastic parts of the case. Always install the device on a wall mount, even for short interruptions in operation.
• Do not use abrasives or organic solvents to clean the vacuum cleaner.
• Do not vacuum up the following items and materials:
  • burning objects; ashes, embers, cigarette stubs, etc.;
  • sharp objects: broken glass, needles, drawing pins, paper clips, etc.;
  • printer or copy machine dye, as it is an electrically conductive mixture and cannot be not completely removed from the filter;
  • poisonous, explosive and corrosive substances;
  • asbestos, or asbestos dust, as well as construction debris and waste.
  • construction gypsum-cement-lime dust.
  • wet dust and dirt;
  • large leaf fragments;
  • water and aqueous liquids.
  • Do not vacuum people or pets.
  • Do not perform wet cleaning if the floor is heavily soiled, first clean the dust and small debris
• Use only accessories and spare parts recommended by the manufacturer.
• Do not close the air outlet of the vacuum cleaner during operation.
• The device is designed to work only with the original battery and charger supplied. The use of external devices for power and charging is prohibited. This may cause damage to the device.
• Clean the device, dust container and filter after each use.
• If the device is not used for a long time, it is recommended to charge the battery every 3 months, having previously completely discharged it for which it is necessary to start the device in operation for the maximum possible time

GENERAL SAFETY INSTRUCTIONS WHEN OPERATING ELECTRICAL DEVICES

• The device must be operated in accordance with the “Rules for the Technical Operation of Consumer Electrical Installations”.
• The device is intended for household use only. Continued use of the device for commercial purposes may result in overloading it which may result in damage to it or harm to human health.
• The device must only be used for its intended purpose in accordance with this manual.
• Inspect the device each time before turning it on. If the device and the power cord are damaged never plug the device into a power outlet.
• Do not use the device after a fall if there are visible signs of damage. The device must be checked by a qualified professional before use.
• Do not use the device if you are not sure of its performance.
• This device is not intended for use by people (including children) who have physical, nervous or mental disabilities or lack of experience and knowledge unless such persons are supervised or instructed regarding the use of this device by the person responsible for their safety. It is necessary to supervise children in order to prevent their games with the device.
• Do not leave the device and the adapter unattended. Keep them out of the reach of children.
• Do not use the device near a bathtub, sink, or other containers filled with water, or in rooms with high humidity.
• Do not use the device outdoors. Protect the device from heat, direct sunlight, impacts against sharp corners, humidity (never immerse the device in the water or another liquid). Do not plug in the power adapter (do not touch it) with wet hands.
• To charge the battery, use only the charger (adapter) included in the set with this model of the vacuum cleaner. Do not use this adapter for other purposes.
• If the adapter and the power cord are damaged, never plug the adapter into the power outlet. If you need to replace (repair) the adapter, contact an authorized service center. Do not disassemble the adapter!
• Do not charge the battery until it is completely discharged.
• To charge the battery first plug the adapter into the appropriate socket on the vacuum cleaner and then plug the adapter into a power outlet. Do not leave the adapter plugged in after the battery is charged completely.
• Plug the adapter into an AC power source (~) only. Before switching on make sure that the adapter is rated for the voltage used in the grid.
• Before connecting the adapter to the grid make sure that the plug is inserted into the corresponding socket of the device.
• Any erroneous plugin deprives you of the right to warranty service.
• When charging is complete always unplug the adapter from the grid and from the charging socket on the device.
• Do not carry the adapter by its power cord. It is also forbidden to disconnect the adapter from the grid by holding it by the power cord. When unplugging the adapter from the grid, hold onto the adapter case without touching the conductive pins.
• Do not try to disassemble and repair the device yourself in order to keep the warranty for the device and to avoid technical problems. Repairs should only be carried out by qualified service personnel.
• Only original spare parts can be used to repair the device.

TECHNICAL SPECIFICATIONS

• Dust container volume: 0.6 l
• Power supply sourse: Li-Ion 2500 mAh 25.2 V rechargeable battery
• Battery charging time: for the first use, 8-10 hours, then up to 4 hours
• Battery life: from 9 to 60 min, depending on the selected mode and configuration
• Charger PAD 7090 HandStick PRO Aqua

Charger specifications

• Input voltage: 100-240 V
• Frequency: ~ 50-60 Hz
• Output voltage: 30 V
• Output current: 0.6 А
• Class of safety protection – II

Note: Due to the ongoing process of making changes and improvements, there may be some differences between the Manual and the product. The manufacturer hopes that the user will pay attention to this.

CERTIFICATION INFORMATION
The device complies with the following EU Directives:

• 2014/30/ЕU (EMC)
• 2014/35/EU (LVD)
• 2001/95/EC The General Product Safety Directive (GPSD)
• 2011/65/EU ROHS II (Directive Restriction of Hazardous Substance)

Estimated Product Life

• Estimated Product Life: 3 years
• Warranty period for inverter pump: 10 years
• Warranty period for the vacuum cleaner: 24 months from day of purchase
• Date of manufacture: indicated on the nameplate of the device
• Warranty period for the battery: 6 months from the purchase date

The date of manufacture is indicated on the product.

• MANUFACTURER: Polaris Corporation Limited, Unit 1801, 18/F, Jubilee Centre, 46 Gloucester Road, Wanchai, Hong Kong
• Owner of TM Polaris: Astrata AG., Gewerbestrasse 5, Cham, canton of Zug, 6330, Switzerland
• Authorized Manufacturer’s Representative in EC: HTV1 CJSC, Schvitrigailos 11A, Vilnius, Lithuania.
  Made in China.

References

• Polaris — Производитель бытовой техники, климатического оборудования, товаров для красоты и здоровья, посуды.
• Polaris — Производитель бытовой техники, климатического оборудования, товаров для красоты и здоровья, посуды.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>