sauermann Si-RM3V Plus Kit Manifold and RV3 Vacuum Probe User Manual

Table of Contents

The Si-RM3 is a device developed for pressure and temperature measurements and settings on stationary or mobile refrigeration equipment.
It is exclusively designed for trained and qualified experts in the field of HVACR. This instrument should only be used for its intended purpose and within the parameters described in the technical features to ensure proper protection.
Maximum operating pressure: 65 bar (942 psi)
The device should not be used with ammonia refrigerant gas (NH3/R717). It is important to inspect the device before every use and not to use it if it is damaged or operates abnormally.
When using the Manifold, always wear protective glasses and gloves to protect your eyes and skin from the extremely cold vapors of refrigerant gases.

Downloading the Application

To download the Si-Manifold application:

Before any measurement, perform an auto-zero of the probe in fresh air:

To pair the high pressure probe, repeat the same procedure as above.

Before any measurement, perform an auto-zero of the probe in fresh air:

Press on the bottom of the screen to go to Manifold mode.
For pressure measurements, connect the low pressure probe on the system to control and connect the high pressure probe on the system to control.
For pipe temperature measurements, connect the temperature clamp on the pressure probe and position the temperature clamp on the pipe.

Launching a Measurement/Displaying Refrigerant List/Accessing Parameters

To launch a measurement or access other functions:

For more information about safety instructions and all available functions, please refer to the complete user manual of the Si-Manifold application.

This device has been developed for the pressure and temperature measurements and settings on stationary or mobile refrigeration equipments. It must not be used in any other purpose.
This device has been developed, produced and sold exclusively to trained and qualified experts in the field of HVACR.
Appropriate training is necessary in order to guarantee a riskless use of this instrument. Sauermann is not responsible for any possible accident during its use.
Please always use the device in accordance with its intended use and within parameters described in the technical features in order not to compromise the protection ensured by the devices.
Maximum operating pressure: 65 bar (942 psi)
The device must not be used with ammoniac refrigerant gas (NH3 / R717)
Do not use the device if it is damaged or if it operates abnormally. Inspect the device before every use.
Always wear protective glasses and gloves when using the Manifold in order to protect your eyes and skin when operating refrigerant gases.
The vapours of refrigerant gases are extremely cold. Do not expose your skin to these vapours.

Please refer to the complete user manual of the Si-Manifold application to get more information about safety instructions.

Go to Google store or App store.
Search for “Si-Manifold” application.
Install the application.
It is also possible to download the application by flashing the following QR code:

sauermann-Si-RM3V-Plus-Kit-Manifold-and-RV3-Vacuum-Probe-
FIG-3

Example with the low pressure probe

sauermann-Si-RM3V-Plus-Kit-Manifold-and-RV3-Vacuum-Probe-
FIG-4

Before any measurement, perform an auto-zero of the probe in fresh air.

sauermann-Si-RM3V-Plus-Kit-Manifold-and-RV3-Vacuum-Probe-
FIG-5

Before any measurement, perform an auto-zero of the probe at fresh air

For pressure measurements

For pipe temperature measurements

LAUNCH A MEASUREMENT / DISPLAY THE REFRIGERANTS LIST / ACCESS TO PARAMETERS

Launch the measurement

Display the refrigerants list

Access to the application parameters

Read the complete user manual of the Si- Manifold app to get information about all the available functions.
Register now to get your additional 1 year manufacturer warranty.