Baseus PSZM000101 GaN3 Pro 6 Ports Power Strip 65W User Manual

Baseus PSZM000101 GaN3 Pro 6 Ports Power Strip 65W

Product Information

• Product Name: Power Combo Power Strip 65W 2AC+2U+2C
• Manufacturer: Shenzhen Times Innovation Technology Co., Ltd.
• Manufacturer Address: 5th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen
• Additional Manufacturer: Dongguan Won travel Electric Co., Ltd.
• Additional Manufacturer Address : No. 1 Yuanshanzai Road, Henggangtou, Xinan district, ChangAn Town, DONGGUAN Guangdong Province China
• Hotline: +86-4000-712-711
• Website: www.baseus.com

Product Usage Instructions

1. Ensure that the Power Combo Power Strip is placed on a stable and flat surface before use.
2. Plug the Power Combo Power Strip into a suitable power outlet.
3. Make sure that the power switch on the Power Combo Power Strip is in the “Off” position before connecting any devices.
4. Connect your desired devices to the available AC, USB, or USB-C ports on the Power Combo Power Strip.
5. If using the AC ports, ensure that the total power consumption of the connected devices does not exceed 65W to avoid overloading.
6. Once all devices are connected, you can turn on the power switch on the Power Combo Power Strip.
7. To disconnect devices, turn off the power switch on the Power Combo Power Strip and unplug them from the ports.
8. When not in use, it is recommended to unplug the Power Combo Power Strip from the power outlet.
9. Do not expose the Power Combo Power Strip to water or other liquids to prevent electrical hazards.
10. Keep the Power Combo Power Strip away from heat sources and direct sunlight.
11. Do not use the Power Combo Power Strip if it appears damaged or if there are any exposed wires.
12. If you experience any issues or have questions about the product, refer to the provided hotline or visit the manufacturer’s website for support.

Product Introduction

This product is a power strip with an extension cord, four DC outputs, and two ACs. The AC to DC modules are made of new semiconductor material (GaN), with a total output power of 65W. It has a small size and various interfaces (2 Outlets+2USB+2Type-C), compatible with multiple fast charging protocols such as QC4 +, PD3.0, QC3.0, QC2.0, SCP, FCP, AFC, and PE +. The maximum output power of Type-C1 and Type-C2 is 65W (20V / 3.25A) when they are used separately, which can provide full-speed fast charging for most laptops. When using 4 ports simultaneously, the Type-C1 port can still be used to fast charge most phones and laptops, such as IP PD fast charging, Huawei 22.5W SCP, Samsung 45W, and Xiaomi 27W devices. Multiple safety protection circuits are built-in such as over-current, over-voltage, and temperature protection.

Schematic Display of Product

• Brand: Baseus
• Name: Extension Cord Set (With 65W GaN Charger)
• Model No.: CCGAN65-2ACS
• Material: PC
• Color: Black
• Rated Voltage : 125V-,60Hz
• Rated Power: 1250W Max.
• Rated Current: 10A Max.
• USB Input: AC 100-125V~, 50/60Hz, 1.5A Max.
• Type-C1/Type-C2 Output: 5V/9V/12V/15V=3A; 20V=3.25A
• USB1 Output: 5V=1A
• USB2 Output: 5V/9V/12V/20V=3A
• Type-C1+Type-C2 Output: 45W+20W
• Type-C2+USB2 Output: 15W
• Type-C1+USB2 Output: 45W+18W
• Type-C1/Type-C2+USB1 Output: 60W+5W
• Type-C1+Type-C2/USB2+USB1 Output : 45W+15W+5W
• Type-C1+(Type-C2+USB2)+USB1 Output: 45W+15W+5W
• Product Size: 974138mm
• Product Weight: About 353g
• Cable Length: 1.65m(65 inch)

Package List

• Power Strip*1
• Charging Cable*1
• User Manual * 1
• Warranty Card *1

Temperatures

Ambient temperatures: non-tropical areas lower than 2000m above sea level.
Storage ambient temperatures: – 20 to 40 degrees Celsius.

Tips: Please read all instructions and warnings before using this product. Non-standard use will damage the product or personal safety.

• The total power of the two-jack socket should not exceed the rated power of the product.
• It is forbidden to connect this product to the two-jack socket.
• It is forbidden to wind the power cord to avoid overheating.
• Please keep this product away from children.
• Do not store the product in high temperature, strong light, and strong magnetic field. Do not place it in other harsh environments such as fire sources.
• Improper use of the product can easily cause damage to the product or may endanger personal and property safety.
• Consumers shall be liable for any personal and property damage resulting from their improper use of the user manual or ignoring the warning, to which our company will not bear any legal liability.
• Disintegration of this product by non-professionals is strictly prohibited.
• Use of DC appliances or loads over the output current of this product shall be avoided (no output due to circuit protection).
• Intense physical actions including knocking, throwing, trampling on and squeezing, etc. shall be avoided.

FCC

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning Please follow the above safety instructions otherwise it will cause fire, electric shock, damage, or other damage.
Shenzhen Times Innovation Technology Co., Ltd.

• Add: 5th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen
• Manufacturer: Dongguan Wontravel Electric Co., Ltd.
• Add: No. 1 Yuanshanzai Road, Henggangtou, Xinan district, ChangAn Town, DONGGUAN Guangdong Province China
• Hotline: +86-4000-712-711
• Website: www.baseus.com
  PB3170Z/P0A1
  Designed by Baseus
  Made in China

References

• Baseus Official | Simple for More

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>