TELESIN T12 Remote Controller User Guide

June 1, 2024
TELESIN

For Hero 12/11/10/9/8/MAX
T12 Remote Controller
112384223
User Guide

Wearing The Remote

  1. Thread the strap through the slots on the back of the reemote.
  2. Position the remote along the strap as shown.
  3. Thread the end of the strap through the underside of theplastic ring.
  4. Fold the strap back onto itself and use the hook and loop fastners to secure the strap. Fold any excess strap back onto itself for addecsecurity.

The Basics

TELESIN T12 Remote Controller - batton

How to use

  1. Powering On/Off
    Press and hold the power button for 3 seconds to power on/off.

  2. Language Settings
    Press the Mode button [to select the previous one] Press the Preset button [to select the next one] Press the Shutter button [to enter] press the power button [to return]

  3. Pairing
    (1) Press the power button to enter >settings >pairing new device.
    (2) Press the Shutter button to enter pairing mode The remote control automatically searches for and connects to the nearest device.
    (3) Finally press the power button to return.

  4. Camera Settings
    Press the mode button [to cycle] to the mode that you want.
    Press and hold the mode button for 4 seconds [to sleep/wake up] the camera.
    Press the Preset button [ to see all the presets for the selected mode ]

  5. Start Capturing
    Press the Shutter button [ to start capturing ] Mark favorite moments by pressing the Mode button [on the remote} during recording
    When the connected camera is nearby, press the Shutter button [to turn on the camera] and start capturing
    Press the Shutter button [to end]

  6. Charging
    Plug the charging cable into the charging slot. Connect the other end of the cable to a computer or other USB power source.
    Charging Time: 1.5h Usage Time: 5h * Please keep the charging device away from metal objects to prevent fire caused by short circuit When charging, the screen lights up and the power indicator starts to work.

Warning

Hazard warnings:

A product that contains button or coin batteries must display a warning message:
Warning : Contains button or coin cell battery. Hazardous if swallowed – see instructions”
“Keep out of reach of children. Swallowing can lead to chemical burns, perforation of soft tissue and death. Severe burns can occur within 2 hours of ingestion. Seek medical attention immediately.”
All electric toys using replaceable button or coin batteries shall state the following warning in the instructions:
“Warning: Dispose of used batteries immediately. Keep new and used batteries away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.”

FCC Caution

15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection again armful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.

  • Increase the separation between the equipment and receiver.

  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

  • Consult the dealer or an experienced radio/TV technician for help.

  • RF warning for Portable device:
    The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

IC Caution

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:

  1. This device may not cause interference;
    (2)This device must accept any interference, including interference that may cause undesired operation of the device.
    The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Disclaimer

Please read this statement carefully and by using this product you will be deemed to have acknowledged and accepted it in full. Please check the product carefully before each use and do not use it if damaged or deformed. By using this product, you acknowledge and agree that you are fully responsible for your actions and the possible consequences of using this product You undertake to use this product only for legitimate and lawful purposes. You understand and agree that (“Telesin’) shall not be liable for any misuse, adverse effects, damages, injuries, penalties or other legal consequences arising directly or indirectly from the use of this product. The user should follow the precautions including but not limited to those mentioned herein. To the extent Telesin reserves the right to interpret and modify this commitment within the limits of national laws and regulations.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals