Onninen 4316407 Sealed Industrial Luminaire Onnproof Instruction Manual
- June 15, 2024
- onninen
Table of Contents
Onninen 4316407 Sealed Industrial Luminaire Onnproof
BEFORE YOU BEGIN
The installation should be carried out by an electrician or by any similarly qualified person.
| | A| B| C
---|---|---|---|---
CNI699, CNI701| 1174| 700±76| 470±76
CNI700, CNI702,
CNI703, CZC376,
CZC377| 1454| 1000±76| 450±76
220-240V ~50/60Hz
IP66
Prevent from damages through electrostatic discharges and from mechanical impacts. A discharge of static electricity may damage sensitive components. Always be properly grounded when touching leads or circuitry inside the luminaire. Use a wrist strap connected by a ground cord to the reflector. Avoid touching light source (LEDs) with bare hands. This may cause significant loss of brightness.
INSTALLATION
Cable installation options
Only for B-G
Luminaire materials
Agressive chemicals in direct contact with the luminaire or in the form of
airborne substances can damage the fitting. So can unsuitable cleaning agents.
Do not use any alkaline or acidic solution nor any solvents. Do not use any
cleansing agents that are aggressive on plastics.
CAUTION, RISK OF ELECTRIC SHOCK!
Disconnect supply before opening! The light source contained in this luminaire
shall only be replaced by the manufacturer or his service agent or similar
qualified person.
www.onninen.com
Manufactured for
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>