VEVOR WMS1224 Stainless Steel Wall Shelf User Manual
- June 15, 2024
- VEVOR
Table of Contents
Technical Support and E-Warranty
Certificatewww.vevor.com/support
STAINLESS STEEL WALL SHELF
USER MANUAL
WMS1224 Stainless Steel Wall Shelf
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and doses not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
Thanks for purchasing one of our products, please read carefully the assembly
instructions before the installation.
This installation is for stainless steel wall shelf with 2 lower supports and
3 lower supports
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
****[email protected]
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
PRODUCT PARAMETERS
| Model | Product Size/inch | Loading Capacity/Max |
|---|---|---|
| WMS1224 | 12*24 | 230 lb |
| WMS1236 | 12*36 | 250 lb |
| WMS1248 | 12*48 | 280 lb |
| WMS1260 | 12*60 | 315 lb |
| WMS1436 | 14*36 | 300 lb |
| WMS1448 | 14*48 | 350 lb |
| WMS1460 | 14*60 | 400 lb |
| WMS1824 | 18*24 | 300 lb |
| WMS1848 | 18*48 | 400 lb |
| WMS1860 | 18*60 | 450 lb |
| WMS1872 | 18*72 | 500 lb |
ASSEMBLY PRECAUTIONS
- Assemble needs to follow these instructions. Incorrect assembly can be a hazard.
- Wear safety goggles and heavy-duty work gloves during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs or medication.
- Weight capacity and other product capabilities apply to a properly and completely assembled product only.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
- Requires two people for assembly.
USE PRECAUTIONS
WARNING: TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
- This product is not a toy. Do not allow children to play with or approach this item.
- Use as intended only. Do not sit or stand on the product.
- Inspect before every use. Do not use it if parts are loose or damaged.
- Use on flat, level, and hard surfaces only.
- Do not exceed the listed weight capacity. Tighten all knobs securely before applying load. Be aware of dynamic loading! The sudden load movement may briefly create an excess load, causing product failure.
TOOLS REQUIRED
PARTS LIST(2 lower supports)
NOTE: Part not shown to actual size.
PARTS LIST(3 lower supports)
ASSEMBLY STEPS
- Lock the support frames on Top
- Measure the distance between the support frame holes
- Punch on the wall, the distance is L1and L2
- Knock the plastic parts into the hole on the wall
- Screw the screw into the plastic parts, do not screw it to the bottom of the 10mm distance
- Hang the Top on the screw
- Tighten the screw
Cleaning
-For cleaning, wipe the surface with a damp (not wet) cloth or wipe dry with a clean lint free cotton cloth.
Support and E-Warranty Certificate https://www.vevor.com/support