logitech 981-001311 Zone 2 Wireless 2 Headset User Guide

logitech 981-001311 Zone 2 Wireless 2 Headset

KNOW YOUR PRODUCT

WHAT’S IN THE BOX

1. Headset
2. USB-C receiver
3. USB-A adapter
4. USB-C to C charging cable
5. Travel bag
6. User documentation

POWER ON / OFF

1. Slide the power switch to the center.
2. Once powered on, the light indicator turns white.
3. To power off, slide the power switch

PAIRING VIA USB RECEIVER

1. USB-C
   Insert the receiver into the computer USB-C port.

2. USB-A
   Insert the USB-C receiver into the USB-A adapter. Then insert the adapter into the computer USB-A port.

3. A headset is already paired to the receiver it ships with. Just power on the headset. Once successfully paired, the light indicator on the receiver will remain solid white. The light indicator on the headset will turn solid white.

4. Make sure “Zone Wireless 2” is selected on the computer sound setting.

PAIRING VIA BLUETOOTH®

1. Slide the power switch to the Bluetooth icon and hold for 2 seconds. The light indicator will flash blue rapidly.
2. Open Bluetooth settings on your device.
3. Select “Zone Wireless 2” in discoverable devices.
4. Once successfully paired, the light indicator will turn solid white.

Tip: When the headset is paired to the laptop if needed, go to the sound setting and select “Zone Wireless 2 Stereo” for the best music quality and select “Zone Wireless 2 Hands-Free” for calls.

ADJUSTING HEADSET

1. Adjust the headset by sliding earcups up and down the headband.
2. Swivel earcups to fit on your ear.
3. It may be easier to adjust the headset on your head. Move the earcups up and down the headband until they sit comfortably on your ears.

ADJUSTING THE MICROPHONE BOOM
The microphone boom rotates 270 degrees. Wear it on either the left or right side. The audio channel will switch automatically, depending on the direction you are wearing the microphone.

CHARGING

• The headset automatically powers off when left idle. The sleep timer can be changed in the Logi Tune app.
• The headset indicator light will turn RED when the battery is low.

Charging via USB cable

1. Plug the USB-C cable end into the USB-C port on the bottom of the earcup.
2. Plug the USB-C end into the USB-C charging port on your computer.
3. The indicator light will be a breathing white light for charging.
4. The indicator light will be solid white when fully charged.
   • 2 hours of charging fully charged the battery.
   • 5 minutes will give you 1 hour of talk time.
5. The headset can be used with the receiver and Bluetooth paired while charging. It can also be used as a corded headset with the USB-C cable connected while the headset is powered off.

Charging via charging stand

1. Plug the charging stand USB-A end into the USB-A charging port on your computer or AC adapter.
2. Place the headset on the charging stand. Make sure to place the side without the microphone boom to the bottom.
3. Headset and charging stand indicator lights will be a breathing, white light when charging.
4. The indicator light will be solid white when fully charged.
   • 2 hours of charging fully charged the battery.

The charging stand is sold separately.

HEADSET CONTROLS

Note:

• Teams activities are only functional when Teams is running on an unlocked computer.
• Media control functionality depends on the type of application.
• Call activities are always the priority over media streaming. When two devices are connected, the Bluetooth connection will be prioritized over the receiver. When two Bluetooth devices are connected, the last active device will take priority over the other. The priority between two Bluetooth devices can be customized on the Logi Tune app under Connected devices.

Tip: ANC and touch controls can be customized on the Logi Tune app.

MUTE
There are 3 ways to mute your microphone.

1. Press the button to mute.
2. Flip up or down the mic boom to mute or unmute.
3. Simply take the headset off to mute and put it back to unmute. To use this feature, enable it on the Logi Tune app.

Can be disabled on the Logi Tune app

Voice prompts indicate when the mic is mute on/off.

ACTIVE NOISE CANCELLATION (ANC)
ANC blocks out the noise around you to help you concentrate on the task at hand.

• Press the ANC button on the side of the earcup to toggle between ANC and Transparency mode
• There will be voice prompts when switching between modes.

Note: The A NC button can be customized to cycle through up to 4 different modes on Logi Tune app.

HEADSET LIGHT INDICATOR

White

| ****

Solid

| Power on
Connected to a device
Battery fully charged
Pulsing| Battery charging
Blinking| Incoming call

Red

| Blinking| Low battery
Solid| Mute on
Blue| Flashing| Bluetooth pairing mode
Blue and White| Blinking| Headset firmware updating

RECEIVER INDICATOR LIGHT

UC version

Light| Status

White

| ****

Solid

| Connected
Ongoing call
Repeat flashing on and off| Incoming call
Red| Solid| Mute on
Blue| Flashing| Pairing

Microsoft Teams version

Light| Status

White

|

Solid

| Connected
Ongoing call
Repeat flashing on and off| Incoming call

Purple

| Solid| Connected to Teams
Pulsing| Connecting to Teams / Teams notifications
Flashing 3 times and off| Not connected to Teams
Flashing for 10 seconds and off| Failed to connect to Teams
Red| Solid| Mute on
Blue| Flashing| Pairing

ON-HEAD DETECTION

Sensors on the headset can detect if the headset is worn or not and control the status. It can be disabled or enabled on Logi Tune app.

Note: Functionality depends on the type of application.

Auto pause/resume
During media streaming, when the headset is taken off, the media will pause. When the headset is put on, the media will resume.

Answer incoming call
When there is an incoming call, put on the headset to answer the call. To use this feature, enable it on Logi Tune app.

Mic mute/unmute
During an ongoing call, when the headset is taken off, the mic will be muted. When the headset is put on, the mic will be unmuted. To use this feature, enable it on Logi Tune app.

AUDIO OVER USB (DENSITY-FRIENDLY)
If your audio is unstable during a call because there are too many wireless devices nearby (high density), the headset can be used as a corded headset.

1. Turn off the headset.
2. Connect the headset to the USB cable provided. And plug the other side of the USB-C cable into the USB-C port on your computer.
3. Make sure “Zone Wireless 2” is selected on the audio device setting.

Note: Headset would be charged during this mode. Button controls may not be available in this mode.

LOGI TUNE
Logi Tune helps boost your headset performance with periodic software and firmware updates. Learn more and download Logi Tune at logitech.com/tune, the Apple App Store or Google Play store.

logitech.com/tune

ADJUSTING SIDETONE
Sidetone lets you hear your own voice during conversations so you are aware of how loud you are talking. In Logi Tune app, select the sidetone feature, and adjust the dial accordingly.

• A higher number means you hear more external sound
• A lower number means you hear less external sound

AUTO SLEEP TIMER
By default, your headset will automatically power off when not in use for 1 hour. Adjust the sleep timer in the Logi Tune app.

PERSONAL EQ
Create a personalized sound equalizer that is optimized for your hearing in the Logi Tune Mobile app.
Through a simple listening test, our algorithm detects what you hear and adjusts frequencies to best deliver the sound you want.

Note: This applies to music quality instead of call audio quality.

ADVANCED CALL CLARITY
Reduces the ambient noise from the far end of a call to hear them more clearly.
Enable it in the Logi Tune app and select low or high mode depending on the noise loudness.

• With this feature enabled, you can enjoy up to 12 hrs (ANC on) or up to 14 hrs (ANC off) of talk time

HEARING PROTECTION
Zone Wireless 2 provides three types of protection to help you hear safely

Peak limiting:
Audio volume is always limited to 100 to prevent hearing damages

Anti-startle protection:

• Once enabled it in the Logi Tune app, it eliminates sudden audio spikes to avoid acoustic shocks as per the Australian G616 guideline
• This applies to all activities only

Noise exposure over time:
Once enabled in the Logi Tune app, it protects your ears from noise exposure over 8 hours with a limit of up to 85dBA as per Australian G616 guidelines, This applies to call activities only

UPDATE YOUR HEADSET
It is recommended to update both your headset and receiver To do so, download Logi Tune from Logitechcom/tune

Note: Turn off and on the headset after the update is completed to make sure it is successfully done

RECONNECT YOUR HEADSET
In case the headset is disconnected from the receiver, you can reconnect your headset via LogiTune

1. Plug the USB-C receiver or USB-A adapter with the USB-C receiver into the computer USB port
2. Power on the headset by sliding the power switch to the center
3. Open Logi Tune Desktop on your computer
4. Select “Zone Receiver” from the dashboard
5. Wait while it is looking for the previously connected headset
6. If no headset is shown as connected to the receiver, click “Pair headset”
7. Enter the pairing mode on the headset by sliding the power switch to the Bluetooth icon and holding it for 2 seconds Light indicator will flash blue rapidly
8. Once successfully paired, the light indicator on the receiver
   and on the headset will turn solid white

RESET YOUR HEADSET
To reset your headset back to its original state, power the headset on, hold the power button to the pairing mode and long press the ANC button for 5 seconds The headset is successfully reset when the headset light indicator blinks fast in red and white 3 times and turns off

DIMENSIONS

Headset:
Height x Width x Depth: 183 9 x 179 1 x 70 0 mm

Weight:
0 23 kg

Receiver:
Height x Width x Depth: 26 6 x 12 4 x 6 5 mm

Adapter:
Height x Width x Depth: 24 5 x 15 4 x 8 7 mm

SYSTEM REQUIREMENTS
Works with common calling applications across almost all platforms and operating systems Works with Windows, Mac, or Chrome-based computer via USB-C, USB-A, Bluetooth and iOS or Android Bluetooth-enabled devices

TECHNICAL SPECIFICATIONS

• Microphone type: 5 omnidirectional MEMS
• Frequency response (headset): 20~20 kHz (music mode), 100~8 kHz (talk mode)
• Frequency response (microphone): 100~8 kHz
• Battery type: Built-in battery (lithium-ion)
• Battery life (talk time): Up to 15 hrs (ANC on), up to 18 hrs (ANC off)
• Battery life (listening time): Up to 22 hrs (ANC on), up to 40 hrs (ANC off) Bluetooth version: 5 2
• Wireless range: Up to 50 m/170 ft (open field line of sight)
• USB-C to C charging cable: 1 5 m Compliant to EN50332-2
  Wireless range may vary based on environmental and computing conditions

logitech.com/prosupport/zonewireless2

© 2023 Logitech Logitech, Logi, Zone, and their logos are trademarks or registered trademarks of Logitech Europe S A and/or its affiliates in the UU.S. and other countries Apple, the Apple logo, iOS, and Mac are trademarks of Apple Inc, registered in the U S and other countries App Store is a service mark of Apple Inc Android, Chrome, Google Play and the Google Play logo are trademarks of Google LLC The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc and any use of such marks by Logitech is under license Microsoft Teams and Windows are trademarks of the Microsoft group of companies USB-C and all other 3rd party trademarks are the properties of their respective owners Logitech assumes no responsibility for any errors that may appear in this manual Information contained herein is subject to change without notice.

References

• Logitech Support + Download
• Logi Tune Software

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>