FLASH EVENT WASHFX 500 IP65 Spotlight User Manual

: June 13, 2024
: FLASH

Table of Contents

INTRODUCTION
SAFETY INFORMATION
PRODUCT INFORMATION
INSTALLATION
CONNECTION
OVERVIEW
LIGHTING CONSOLE PATCHING GUIDELINES
DMX CHART
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FLASH EVENT WASHFX 500 IP65 Spotlight User Manual

WARNING! The WASHFX has a powerful pan and tilt motor. The torque reaction when the head is panned suddenly can cause the base to move if the fixture is standing unsecured on a surface. Do not apply power to the WASHFX unless the baase is securely fastened to a surface or to rigging
hardware.
WARNING! Use 2 clamps to rig the fixture. Do not hang the fixture from only one clamp. Lock each clamp with both 1/4-turn fasteners. Fasteners are locked only when turned a full 900 clockwise.
WARNING! When clamping the fixture to a truss or other structure at any other angle than with the yoke hanging vertically downwards, use two clamps of half-coupler type. Do not use any type of clamp that does not completely encircle the structure when fastened.
WARNING! Position or shade the head so that the front lens will not be exposed to sunlight or any other strong light source from any angle – even for a few seconds. See Figure 1. The WASHFX lens can focused the sun’s rays, creating a potential fire hazard and causing damage.
Instruction
IMPORTANT! Do not point strong light output from other fixtures at the WASHFX, as intense illumination can damaged the display

INTRODUCTION

THANK YOU FOR PURCHASING EVENT WASHFX 500 IP65. FOR SAFETY REASONS AND TO ENSURE THE TROUBLE-FREE OPERATION, CAREFULLY READ THE INSTRUCTIONS.

SAFETY INFORMATION

Please keep this User Manual for future consultation. If you sell the fixture to another user, be sure that they also receive this instruction booklet.
Unpack and check carefully there is no transportation damage before using the fixture.
Before operating, ensure that the voltage and frequency of power supply match the power requirements of the fixture.
It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.
Disconnect main power before servicing and maintenance.
Use safety chain when fixes this fixture. Don’t handle the fixture by taking its head only, but always by taking its base.
Maximum ambient temperature is: 40°C Don’t operate it where the temperature is higher than this
In the event of serious operating problem, stop using the fixture immediately. Never try to repair the fixture by yourself.
Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. Always use the same type spare parts.
Do not connect the device to any dimmer pack.
Do not touch any wire during operation and there might be a hazard of electric shock.
To prevent or reduce the risk of electrical shock or fire, do not expose the fixture to rain or moisture.
\The housing must be replaced if they are visibly damaged.
Do not look directly at the light spot while the fixture is on.

PRODUCT INFORMATION

Light Source:
LED RGBW 7x60W RGBW + 28 x 0.5 W RGB LEDs
Power consumption: 400W
Power supply voltage: 100-240V, 50/60Hz AC
PAN range: 540°
TILT range: 210°
Beam angle (min/max): 3,5°-45°
Features: CTO, Zoom, Kaleidoscope effect, Macro colour, Aura effect (28 pcs. 0.5 W RGB LEDs)
Operating modes: DMX, Auto, Sound-controlled, Master, Slave, ArtNet/sACN/RDM support – Software update via RJ45 cable
RJ45 cable
DMX channel mode: 26/49/105/127
IP Rating: IP65
Housing made: ABS
Cooling: Active
AC IN/OUT: TrueCon 3-Pin XLR DMX Input/Output
Net Weight: 12 kg
Dimensions: H(46,3)xW(21)xD(30,9) cm

INSTALLATION

The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure and is able to support a weight of 10 times of the unit’s weight. Also always use a safety cable that can hold 12 times of the weight of the unit when installing the fixture. The equipment must be fixed by professionals. And it must be fixed at a place where is out of the touch of people and has no one pass by or under it.
Regardless of the rigging option ypu chose for our fixture, always be sure to secure your fixture with safety cable. The fixture provides a builit-in rigging point for a safety cable on the hanging bracket as illustrated above. Be sure to only use the designated rigging point for the safety cable and never secure a safety cable to a carrying handle.

CONNECTION

The device is equipped with the following interfaces:

DMX (in/out): XLR 3(5)-pin socket
Power (in/out): TrueCon socket

The connection is performed using cable with XLR-female -> XLR-Male plugs.

CAUTION! At the last fixture, the DMX signal has to be terminated with a terminator. Solder a 120Ω resistor between signal (-) and signal (+) into a XLR plug and plug it in the DMX output of the last fixture.

3-PIN XLR
Connection Instruction
5-PIN XLR

Diagram of connection of devices by DMX cable.
Connection Instruction

The connection is performed using power cable with TrueCON connector. The device must be operated by qualified personnel.
CAUTION! In the case of cable damage do not attempt to repair. Replacement or repair can be made only on the manufacturer or by a person with appropriate permissions.

Using lamp, the change rate of power voltage should be within ±10%, if the voltage is too high, it will shorten the light’s life; if it’s not enough, the lamp will be dark. Please restart it after turning off light for 20 minutes until full-cooling. Frequent switching will reduce the life span of lamps and bulbs; intermittent using will improve the life of bulbs and lamps.

Voltage Specyfication.

Input Voltage	Frequency	Total Power
230[V] AC	50[Hz]	400[W]

OVERVIEW

Overview

Lens
System Menu LCD Display
DMX Input
Power Input
DMX Output
Power Output
Fuse
RJ45 Input
Value
RJ45 Output

System Menu

LanguageChinese English Invert ScreenOFF ON AUTO Signal KeepNO/YES Screen LockNO/YES Load DefaultNO.YES NetworkInternetIP002.000.000.001MS255.000.000.000UniverseNet(0~127)000~127Sub_Universe000~127 ManualPan000~255 Tile000~255 Zoom000~255 Rotation000~255 Red000~255 Green000~255 Blue000~255 White000~255 Spark Red000~255 Spark Green000~255 Spark Blue000~255 Effect000~255 Spark Effect000~255 ResetReset Effect Reset Scan Rest All

Main Menu	Sub Menu	Option/Value	Option/Value
Address	001
…
512
Channel	026CH
049CH
105CH
127CH

Setting

|

Control Mode

LED Frequency

| 400HZ|
1200HZ|
2000HZ|
4000HZ|
6000HZ|
8000HZ|
16000HZ|
24000HZ|
White Balance| 1R| 000-255
1G| 000-255
1B| 000-255
1W| 000-255
2R| 000-255
….|
7W| 000-255
FAN Mode| Auto|
Silent|
Full|

Calibration

| Invert_Pan| NO/YES
Invert_Tilt| NO/YES
System Calibration| PAN 001~255
Tilt 001~255
Focus 001~255
Rotate 001~255

LIGHTING CONSOLE PATCHING GUIDELINES

The product is a versatile luminaire which combines two fixtures into one housing, allowing it to produce multiple unique lighting effects typically not found in a single lighting fixture. The DMX layout is designed to offer a variety of options for controlling each fixture efficiently.
The main fixture contains 7x 60W RGBW LEDs, while the Aura effects contains 28×0.5W RGB LEDs. For ease of use the DMX layout is arranged to allow lighting consoles to separate the fixture into multiple segments or parts.It is especially important to arrange the fixture in such segments or parts when using the fixture in the full extended 127channel DMX mode. For simpler programming, reduced DMX channel modes can be used. However, for easy recall of interesting pixel animations, both the RGBW and Aura LED fixtures contain two FX systems: one which controls the RGBW cells, and a second that is dedicated to the Aura LEDs.
The pixels are arranged in a grid pattern as illustrated below. ( RGBW 1-7 /Aura LED 8-35)
Lighting

DMX CHART

26CH Mode(DMX,ArtNet,sACN)

Channel	Value	Function	Description
1CH	0-255	Pan Movement	0°- 540°
2CH	0-255	Fine Pan Movementpositioning	16 bit adjustable
3CH	0-255	Tilt Movement	0°- 205°
4CH	0-255	Fine Tile Movementpositioning	16 bit adjustable
5CH	0-255	P/T motors speed	fast to slow
6CH	0-255	Zoom	3.15°- 45° (From narrow to wide )
7CH	0-255	Fine Zoom positioning
8CH	0-255	Lens-Rotation
0-5	/
6-62	Lens-Rotation 1	From left to right position (0-360°）
63-127	Lens-Rotation 2	From right to left position (0-360°）
128-192	Lens-Rotation 3	From left to right position (Infinite-Rotation）From

slow to fast
193-255| Lens-Rotation 4| From right to left position(Infinite-Rotation）From slow to fast
9CH| 0-255| Reset|
0-200| /|
201-215| Zoom/lens-rotationmotors reset| The value stops for 5 seconds
216-230| P/T motors reset| The value stops for 5 seconds
231-245| Overall reset| The value stops for 5 seconds
246-255| /|
10CH| 0-255| Master Dimmer| Linear 0-100%
11CH| 0-255| Fine Master dimmer|
12CH| 0-255| Strobe function of RGBL（60W ）LEDs|
0-5| /|
6-55| Synchronous strobe| From slow to fast
56-105| Pulse strobe| From slow to fast
106-155| Random strobe| From slow to fast
156-205| Fade Strobe1| From slow to fast Brightness from high tolow
206-255| Fade Strobe2| From slow to fast Brightness from low tohigh
13CH| 0-255| Strobe Function of AuraLEDs|
| 0-5| /|
| 6-55| Synchronous strobe| From slow to fast
| 56-105| Pulse strobe| From slow to fast
| 106-155| Random strobe| From slow to fast
| 156-205| Fade Strobe1| From slow to fastBrightness from high to low
| 206-255| Fade Strobe1| From slow to fast Brightness from low tohigh
14CH| 0-255| 60w LED- Red| Linear 0-100%
15CH| 0-255| 60w LED -Green| Linear 0-100%
16CH| 0-255| 60w LED- Blue| Linear 0-100%
17CH| 0-255| 60w LED-Lime| Linear 0-100%
18CH| 0-255| Aura LED- Red| Linear 0-100%
19CH| 0-255| Aura LED-Green| Linear 0-100%
20CH| 0-255| Aura LED-Blue| Linear 0-100%
21CH| 0-255| 60W LEDs Built-inprograms| Program1-program16
| 0-5| /|
| 6-20| Program 1| The color-changes of the build-in effects of60w Leds is controlled by its color CH
| 21-35| Program 2| ~
| 36-50| Program 3| ~
| 51-65| Program 4| ~
| 66-80| Program 5| ~
| 81-95| Program 6| ~
| 96-110| Program 7| ~
| 111-125| Program 8| ~
| 126-140| Program 9| ~
| 141-155| Program 10| ~
| 156-170| Program 11| ~
| 171-185| Program 12| ~
| 186-200| Program 13| ~
| 201-215| Program 14| ~
| 216-230| Program 15| ~
| 231-245| Program 16| ~
| 246-255| Auto-running built-in programs| Program 1-Program 16 Auto-running
22CH| 0-255| 60W Program Speed| From Slow to fast
23CH| 0-255| Aura LEDs built-inprogram| Program1-program16
| 0-5| /|
| 6-20| Program 1| The color-changes of the build-in effects of
| | | Aura LEDs is controlled by its color CH
| 21-35| Program 2| ~
| 36-50| Program 3| ~
| 51-65| Program 4| ~
| 66-80| Program 5| ~
| 81-95| Program 6| ~
| 96-110| Program 7| ~
| 111-125| Program 8| ~
| 126-140| Program 9| ~
| 141-155| Program 10| ~
| 156-170| Program 11| ~
| 171-185| Program 12| ~
| 186-200| Program 13| ~
| 201-215| Program 14| ~
| 216-230| Program 15| ~
| 231-245| Program 16| ~
| 246-255| Auto-running built-in programs| Program 1-Program 16Auto-running
24CH| 0-255| Aura LEDs programspeed| from slow to fast
25CH| 0-255| Marco Color|
| 0-45| |
| 46-50| Cyan| R=000,G=255,B=255,W=000
| 51-55| Yellow| R=255,G=255,B=000,W=000
| 56-60| Magenta| R=255,G=000,B=255,W=000
| 61-65| Medium Yellow| R=156,G=126,B=000,W=000
| 66-70| Straw Tint| R=152,G=115,B=009,W=000
| 71-75| Surprise Peach| R=198,G=114,B=009,W=000
| 76-80| Fire| R=255,G=056,B=000,W=000
| 81-85| Medium Amber| R=255,G=135,B=000,W=000
| 86-90| Gold Amber| R=255,G=100,B=000,W=000
| 91-95| Dark Amber| R=255,G=065,B=000,W=000
| 96-100| Sunrise Red| R=255,G=083,B=002,W=000
| 101-105| Light Pink| R=255,G=112,B=000,W=141
| 106-110| Medium Pink| R=255,G=087,B=000,W=107
| 111-115| Pink Carnation| R=255,G=107,B=000,W=130
| 116-120| Light Lavender| R=243,G=117,B=039,W=197
| 121-125| Sky Blue| R=000,G=255,B=135,W=000
| 126-130| Just Blue| R=000,G=194,B=130,W=000
| 131-135| Dark yellow green| R=041,G=219,B=000,W=000
| 136-140| Spring Yellow| R=245,G=202,B=000,W=000
| 141-145| Light Amber| R=237,G=163,B=000,W=000
| 146-150| Straw Tint| R=230,G=160,B=000,W=069
| 151-155| Deep Amber| R=255,G=166,B=000,W=000
| 156-160| Orange| R=255,G=122,B=000,W=000
| 161-165| Light Rose| R=255,G=141,B=031,W=000
| 166-170| Middle Rose| R=217,G=130,B=028,W=000
| 171-175| Dark Pink| R=255,G=109,B=033,W=000
| 176-180| Magenta| R=255,G=020,B=015,W=000
| 181-185| Peacock Blue| R=051,G=255,B=051,W=000
| 186-190| Steel Blue| R=206,G=255,B=056,W=000
| 191-195| Light Blue| R=074,G=255,B=082,W=000
| 196-200| Dark Blue| R=000,G=186,B=255,W=000
| 201-205| Leaf Green| R=206,G=255,B=000,W=000
| 206-210| Dark Green| R=084,G=255,B=013,W=000
| 211-215| Mauve| R=227,G=041,B=056,W=000
| 216-220| Deep Golden Amber| R=255,G=058,B=000,W=000
| 221-225| Pale Lavender| R=255,G=197,B=061,W=000
| 226-230| Primary Green| R=077,G=255,B=000,W=000
| 231-235| Bright Blue| R=000,G=255,B=087,W=000
| 235-240| Apricot| R=255,G=143,B=013,W=000
| 241-245| Pale Gold| R=253,G=171,B=026,W=000
| 246-250| Deep Orange| R=222,G=084,B=000,W=000
| 251-255| Flame Red| R=255,G=046,B=002,W=000
26CH| 0-255| color temperature preset| Color temperature 2000K-8000K
| 0-17| Off light|
| 18-34| 8000K| R=255,G=182,B=110,W=255
| 35-51| 7500K| R=255,G=144,B=089,W=255
| 52-68| 6500K| R=255,G=129,B=081,W=255
| 69-85| 6000K| R=255,G=121,B=073,W=255
| 86-102| 5600K| R=255,G=106,B=066,W=255
| 103-119| 5000K| R=255,G=090,B=055,W=255
| 120-136| 4500K| R=255,G=071,B=043,W=255
| 137-153| 4000K| R=255,G=055,B=034,W=255
| 154-170| 3500K| R=255,G=029,B=024,W=255
| 171-187| 3200K| R=255,G=011,B=019,W=255
| 188-204| 3000K| R=255,G=004,B=016,W=255
| 205-221| 2700K| R=255,G=000,B=009,W=203
| 222-238| 2500K| R=255,G=000,B=004,W=172
| 239-255| 2000K| R=255,G=000,B=000,W=105

49CH Mode (Support Dmx /Artnet/sACN. when u use DMX+Artnet mode, the 1-17CH are controlled by DMX protocol)

Channel	Value	Function	Description
1CH	0-255	Pan Movement	0°- 540°
2CH	0-255	Fine Pan Movementpositioning	16 bit adjustable
3CH	0-255	Tilt Movement	0°- 205°
4CH	0-255	Fine Tile Movementpositioning	16 bit adjustable
5CH	0-255	P/T motors speed	fast to slow
6CH	0-255	Zoom	3.15°- 45° (From narrow to wide )
7CH	0-255	Fine Zoom positioning

8CH

9CH

| 0-255| Reset|
0-200| /|
201-215| Zoom/lens-rotationmotors reset| The value stops for 5 seconds
216-230| P/T motors reset| The value stops for 5 seconds
231-245| Overall reset| The value stops for 5 seconds
246-255| /|
10CH| 0-255| Master Dimmer of AuraLEDs| Linear 0-100%
11CH| 0-255| Fine Aura dimmer|

12CH

16CH

| 0-255| Aura LEDs built-inprogram| Program1-program16
| 0-5| /|
| 6-20| Program 1| The color-changes of the build-in effects ofAura LEDs is controlled by its color CH
| 21-35| Program 2| ~
| 36-50| Program 3| ~
| 51-65| Program 4| ~
| 66-80| Program 5| ~
| 81-95| Program 6| ~
| 96-110| Program 7| ~
| 111-125| Program 8| ~
| 126-140| Program 9| ~
| 141-155| Program 10| ~
| 156-170| Program 11| ~
| 171-185| Program 12| ~
| 186-200| Program 13| ~
| 201-215| Program 14| ~
| 216-230| Program 15| ~
| 231-245| Program 16| ~
| 246-255| Auto-running built-in programs| Program 1-Program 16Auto-running
17CH| 246-255| Aura LEDs built-inprogram| Program1-program16
18CH| 0-255| Aura LEDsprogram speed| from slow to fast

19CH

| 0-255| 60W Dimmer| From Dark to light
| 0-255| Strobe function of RGBW（60W ）LEDs|
| 0-5| /|
| 6-55| Synchronous strobe| From slow to fast
| 56-105| Pulse strobe| From slow to fast
| 106-155| Random strobe| From slow to fast
| 156-205| Fade Strobe1| From slow to fast Brightness from high to low

20CH

21CH

| 0-255| color temperature preset| Color temperature 2000K-8000K
| 0-17| Off light|
| 18-34| 8000K| R=255,G=182,B=110,W=255
| 35-51| 7500K| R=255,G=144,B=089,W=255
| 52-68| 6500K| R=255,G=129,B=081,W=255
| 69-85| 6000K| R=255,G=121,B=073,W=255
| 86-102| 5600K| R=255,G=106,B=066,W=255
| 03-119| 5000K| R=255,G=090,B=055,W=255
| 120-136| 4500K| R=255,G=071,B=043,W=255
| 137-153| 4000K| R=255,G=055,B=034,W=255
| 154-170| 3500K| R=255,G=029,B=024,W=255
| 171-187| 3200K| R=255,G=011,B=019,W=255
| 188-204| 3000K| R=255,G=004,B=016,W=255
| 205-221| 2700K| R=255,G=000,B=009,W=203
| 222-238| 2500K| R=255,G=000,B=004,W=172
| 239-255| 2000K| R=255,G=000,B=000,W=105
22CH| 0-255| LED1 Red| Dark to light
23CH| 0-255| LED1 Green| Dark to light
24CH| 0-255| LED1 Blue| Dark to light
25CH| 0-255| LED1 White| Dark to light
….| ….| ….| ….
….| ….| ….| ….
46CH| 0-255| LED7 Red| Dark to light
47CH| 0-255| LED7 Green| Dark to light
48CH| 0-255| LED7 Blue| Dark to light
49CH| 0-255| LED7 White| Dark to light

105CH Mode (Support Dmx /Artnet/sACN. when u use DMX+Artnet mode, the 1-19CH are controlled by DMX protocol).

Channel	Value	Function	Description
1CH	0-255	Pan Movement	0°- 540°
2CH	0-255	Fine Pan Movementpositioning	16 bit adjustable
3CH	0-255	Tilt Movement	0°- 205°
4CH	0-255	Fine Tile Movementpositioning	16 bit adjustable
5CH	0-255	P/T motors speed	fast to slow
6CH	0-255	Zoom	3.15°- 45° (From narrow to wide )
7CH	0-255	Fine Zoom positioning
8CH	0-255	Lens-Rotation
0-5	/
6-62	Lens-Rotation 1	From left to right position (0-360°）
63-127	Lens-Rotation 2	From right to left position (0-360°）
128-192	Lens-Rotation 3	From left to right position (Infinite-Rotation） From

127CH Mode (Support Dmx /Artnet/sACN. when u use DMX+Artnet mode, the 1-9CH are controlled by DMX protocol).

13CH0-25514CH0-25515CH0-25516CH0-25517CH0-255………………………………….38CH0-25539CH0-25540CH0-25541CH0-25542CH0-255 43CH.0-25544CH0-25545CH0-25546CH0-255……………………125CH0-255126CH0-255127CH0-255

Channel	Value	Function	Description
1CH	0-255	Pan Movement	0°- 540°
2CH	0-255	Fine Pan Movementpositioning	16 bit adjustable
3CH	0-255	Tilt Movement	0°- 205°
4CH	0-255	Fine Tile Movementpositioning	16 bit adjustable
5CH	0-255	P/T motors speed	fast to slow
6CH	0-255	Zoom	3.15°- 45° (From narrow to wide )
7CH	0-255	Fine Zoom positioning

8CH

9CH

| 0-255| Reset|
0-200| /|
201-215| Zoom/lens-rotationmotors reset| The value stops for 5 seconds
216-230| P/T motors reset| The value stops for 5 seconds
231-245| Overall reset| The value stops for 5 seconds
246-255| /|
10CH| 0-255| 60W Dimmer| From Dark to light

11CH

12CH